HeadRush HRK 1004 Wireless Headphones User Manual

HeadRush HRK 1004 Wireless Headphones

WHAT’S INCLUDED

• HRK 1004 Headphones
• Micro USB charging cable
• 3,Smm audio cable
• Instruction manual

IDENTIFYING THE PARTS OF YOUR HEADPHONES

1. Volume increase +/Next song
2. Volume decrease – /Previous song
3. MFB (Multi-function button) Phone/Play/Pause/ON/OFF
4. 3.5mm audio jack
5. Micro USB charging port
6. Microphone and LED indicator

INTRODUCTION

Thank you for purchasing the HeadRush HRK 1004 Headphones, In order to
maximize your listening experience, please read the instructions below.

OPERATING INSTRUCTIONS

TO

|

DO THIS

---|---
Power ON| Press and hold MFB for 3 seconds.
Power OFF| Press and hold MFB for 3 seconds.
Adjust the volume| Long press the +/- button. When the maximum volume is reached the headphones will make a “beep” sound.
Play/Pause| Press MFB once to pause, press again to resume.
Next track| Short press + button.
Previous track| Short press – button.
Answer a call| Press MFB button.
End a call| Press MFB button.
Reject a call| Press and hold MFB button for 2 seconds.
Redial previous number| Quickly press MFB button twice.

NOTE : The function compatibility may vary among different smartphones or devices. Not all functions are available on all devices.

LED INDICATOR

FUNCTION

|

LED STATUS

---|---
Power ON| Blue LED will be ON for 3 seconds, then the blue and red LEDs will flash alternately.
Power OFF| Blue LED will be ON for 3 seconds, then turn OFF.
Pairing| Blue and red LEDs will flash alternately.
Standby| Solid blue LED.
Incoming call| Blue LED will flash.
Charging| Solid red LED.
Charging complete| All LEDs turn OFF.

CHARGING

Please charge your headphones fully before the first use. After use, when the battery is low, charge using the included micro USB cable, When the battery is low the headphones will make a “beep” sound. A full charge will take about 3 hours. During charging, the red LED turn ON. When fully charged it will turn OFF.

PAIRING

Pairing with one smartphone or other device:

• Make sure the headphones are OFF
• Press and hold the MFB button for 5 seconds to enter into pairing mode
• The red LED and blue LED will flash alternately
• Locate the Bluetooth® settings in your device and search for the headphones
• From the list of found devices, select “HRK 1004” and select to connect to it
• Follow the instructions and enter “0000” as PIN, if required
  The headphones will automatically connect to your device when switched ON, provided your device Bluetooth® is ON and within range.

USING YOUR HEADPHONES

1. For the best sound and comfort, the right fit is very important, Please adjust your headband to make sure the headphones fit snugly and securely.
2. Place your headphones on corresponding ear side (R on right ear and L on left ear).
3. To ensure your headphones stay in place while doing physical activity, make sure the cord is placed in front of your head and body.

3.SMM LINE-IN

Insert the supplied audio cable to the headphone socket and the 3.5mm
audio jack into your audio device.

TO PLAY MUSIC FROM YOUR PC OR LAPTOP

After pairing the device to your PC or laptop, right-click on the speaker icon on the lower right hand corner of the task bar, select “Playback devices”.
Under the “Playback” tab, the paired device will show within the list, To connect to it, click on the speaker to set it as default. The audio will start to play from the paired device.
Operation will vary among different PCs and laptop.

PROTECTING YOUR HEADPHONES

• Keep your headphones clean and free of debris
• DO NOT tug on the cable to disconnect plug from device but rather pull from the plug to disconnect
• DO NOT wrap headphones around a device while it is still plugged in as it puts unnecessary pressure on plug/cord connection

SPECIFICATIONS

* HFP=Handsfree profile, A2DP=Advanced audio distribution profile, AVRCP=Audio video remote control profile
** Approximate playback time and battery life depends on individual use and may be more or less than specified.

WARNING!

• DO NOT insert plug into electric sockets
• Supervise children when using equipment, this product is not a toy
• Listening to headphones at high volume levels, particularly over extended periods of time may damage your hearing
• If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product
• The operation of switching on your Hi-Fi system or plugging in the headphones may cause clicks which at high volume setting may affect your hearing. Therefore, always set the volume control to minimum before switching between different sources (tuner, turntable, CD player, etc.) or plugging in the headphones
• DO NOT use headphones while driving or cycling

TROUBLESHOOTING

No sound

• Power ON the headphones and charge the battery
• Increase the volume on your headphones and Bluetooth” device
• Make sure you are using the correct paired device
• Move your Bluetooth” device closer to the headphones and away from any interference or obstructions
• Use a different music source
• Pair a different Bluetooth” device

Poor sound quality

• Use a different music source
• Pair a different Bluetooth” device
• Move the Bluetooth” device closer to the headphones, and away from any interference or obstructions

Headphones don’t turn ON

• Power ON the headphones
• Charge the battery

Headphones don’t pair with Bluetooth” device

• On your Bluetooth” device: Turn the Bluetooth” feature ON and then OFF. Delete “HRK 1004″ Headphones from the Bluetooth” list on your device. Pair again
• Move your Bluetooth” device closer to the headphones and away from any interference or obstructions

FSS STATEMENT:

This device complies with Part 15 of the FCC rules. Operation is subject to the following 2 conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

INDUSTRY CANADA NOTICE RSS247

This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of Industry Canada.

IC: 255A-8086993

THE SOURCE – WARRANTY

The Source warrants that this product will be free from defects in materials and workmanship for a period of 12 months from the date of purchase. Within this period, simply take the product and your proof of purchase to any
The Source store or participating dealer and the product will be replaced (where available) without charge. Any product which has been subject to misuse or accidental damage is excluded from this warranty.
This warranty is only applicable to a product purchased through The Source company-owned stores or participating dealers in Canada where the warranty is included with the product. While this warranty does not confer any legal rights other than those set out above, you may have additional statutory rights which will vary under the laws of the various countries, states, provinces and other governmental entities in which The Source operates. This warranty is subject to all statutory rights you may have in Canada.

Imported by:
The Source, Barrie, Ontario, Canada, L4M 4W5
Manufactured in China
www.thesource.ca
© 2020 The Source. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>