HEADRUSH HRB5030 TRUE WIRELESS EARBUDS User Manual

: June 5, 2024
: HeadRush

Table of Contents

INTRODUCTION
WHAT’S INCLUDED
OPERATING INSTRUCTIONS
CHARGING THE CASE
CHARGING THE EARBUDS
PAIRING
OPERATION
RESET YOUR EARBUDS IF THEY AREN’T CONNECTING
TROUBLESHOOTING
CLEANING
IMPORTANT SAFETY INFORMATION
SPECIFICATIONS
FCC STATEMENT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**HEADRUSH HRB5030 TRUE WIRELESS EARBUDS User Manual

**

INTRODUCTION

Thank you for purchasing the HRB 5030 true wireless earbuds. In order to maximize your listening experience please read the following instructions.
Product Overview

Multi-function button (MFB)
LED Indicator
Touch control
Ear hook
Charging case LED indicators
Charging port

Additional large and small earbud tips, large and small ear hooks and silicone caps included (medium earbud tips and earhooks are installed on earbuds).

WHAT’S INCLUDED

HRB 5030 Earbuds
Charging case
Small, medium and large earbud tips
Left medium (LM) and right medium (RM), left small (LS) and right small (RS), Left large (LL) and right large (RL), ear hooks
Silicone cap
USB-C charging cable
Instruction manual

OPERATING INSTRUCTIONS

TO	DO THIS
Power ON	Remove the earbuds from the charging case or press and hold the left

and right MFB buttons for 3 seconds.
Power OFF| Place earbuds back in charging case or press and hold the left and right MFB buttons for 5 seconds.
Play/Pause| Tap either touch control once.
Next song| Tap right touch control twice.
Voice assistant| Press the left MFB button twice.
Previous song| Tap left touch control twice.
Answer a call| Press either MFB button once.
End a call/Reject an incoming call| Press either MFB button twice.
Switch the EQ| Press the right MFB twice to switch between the three EQ modes.

NOTE: The function compatibility may vary among different smartphones or devices. Not all functions are available on all devices.

CHARGING THE CASE

Use the included charging cable to fully charge the case before first use. It will take approximately 2 hours to fully charge.

The 4 white LEDs will either stay on or flash depending on the battery charge

CHARGING THE EARBUDS

The earbuds will automatically power OFF and begin charging when they are placed in the charging case. The red LED will stay ON to indicate the earbuds are charging. When charged, the blue LED will stay lit for 1 minute, then turn OFF. It will take 1 hour to fully charge the earbuds. The earbuds can be charged 6 times using a fully-charged case.
NOTE: During use, the red LED on the earbuds will flash slowly when their battery level is low. Please charge the earbuds.

PAIRING

The earbuds will automatically enter Bluetooth’ pairing mode when used for the first time.

Remove both earbuds from the charging case. The earbuds will beep to indicate they have powered on and will beep again when the earbuds are paired to each other. The red and blue lights will flash quickly on the main earbud. Turn Bluetooth’ ON in your device settings and select “HRB 5030”
Follow the instructions and enter “0000” as PIN, if required
When the earbuds are successfully paired to your device, the blue LEDs will flash every 5 seconds

After initial pairing, the earbuds will automatically connect to your device when removed from the charging case, provided either the left or right earbud and your Bluetooth’ are ON and within range. If you would like to use only the left or right earbud, place one earbud back in the case. The earbud left in your ear will continue to play. To pair only 1 earbud to your device, remove only 1 earbud from the case and follow the above steps.
NOTE: If the earbuds have been powered ON but have not been paired to your device, they will automatically turn OFF after 5 minutes to conserve battery power.

OPERATION

If the earbuds are out of the charging case and are OFF, press and hold either MFB button for 3 seconds to turn ON
To turn the earbuds OFF without returning them to the charging case, press and hold the left and right MFB buttons for 5 seconds to power OFF
While playing music, tap either touch button to pause, tap again to resume. Tap either touch button twice quickly to skip to the next track
The music will pause and the earbuds will ring when there is an incoming call. Press either MFB button once to answer the call, and press twice to end the call
To switch between the 3 equalizer (EQ) settings, press the right MFB button twice quickly
To access voice assistant, press the left MFB button twice

RESET YOUR EARBUDS IF THEY AREN’T CONNECTING

Turn the earbuds OFF
Press and hold either MFB button for 8 seconds and release after the earbud beeps
Press and hold both MFB buttons until the earbuds power ON and beep again
The earbuds will enter pairing mode
Select “HRB 5030” in your device’s settings
The earbuds will beep once more after they have successfully paired

WARNING!

Supervise children when using equipment, this product is not a toy
Listening to earbuds at high volume levels, particularly over extended periods of time may damage your hearing
If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product
The operation of switching on your Hi-Fi system or plugging in the earbuds may cause clicks which at high volume setting may affect your hearing. Therefore, always set the volume control to minimum before switching between different sources (tuner, turntable, CD player, etc.) or plugging in the earbuds
DO NOT use earbuds while driving or cycling
The small parts included with this product can be a choking hazard. This product is not intended for use by small children and should be kept away from children under 3 years of age
If not used for long periods, it is recommended to charge the earbuds and case at least every 3 months
Please dispose of rechargeable batteries properly. DO NOT dispose of batteries in fire to prevent an explosion

TROUBLESHOOTING

No sound

Please check the volume on your audio device to make sure it is outputting sound

Connection Problems

Please return the earbuds to the case and then remove them again if there are any connection issues.

The earbuds are not fitting comfortably

Please switch out the ear hooks and earbud tips to a different size to find the appropriate fit Improving the Sound
Sound can sometimes be improved by moving to a larger eartip size. The eartips still need to fit comfortably in your ear

CLEANING

Your earbuds may require periodic cleaning. Remove the tips from the earbuds and wash them with a mild detergent and water. Make sure the tips are dry before putting them back on the earbuds.

IMPORTANT SAFETY INFORMATION

CAUTIONS

Keep in a safe place free from dust, liquid and extreme temperatures
Do not attempt to disassemble the product
Do not use chemicals to clean the product

SPECIFICATIONS

EARBUDS
Bluetooth version: V5.0
Bluetooth profiles: HSP/HFP/A2DP/AVRCP/ACC/SBC
Wireless range: 10-15 m
Playback time: Approx. 6 hours
Standby time: Approx. 50 hours
Driver diameter: 10mm
Frequency response: 20Hz-20kHz
Sensitivity: 97dB±3dB at 1 kHz/1mW
Impedance: 160±15% /(At 1kHz 0.4V)
Battery: Polymer Lithium

CHARGING CASE

Input: DC 5V — 500mA
Output: DC 5V — 0.4A

A2DP=Advanced Audio Distribution Profile, AVRCP=Audio Video Remote Control Profile, HSP-Handset Profile, HFP=Handsfree Profile.
Approximate playback time, battery life depends on individual use and may be more or less than specified.
Bluetooth connected, power ON, no music playing.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by The Source (Bell) Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

IC STATEMENT:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).

Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.