nedis FNTR12CWT40 Tower Fan with oscillation function User Guide
- June 7, 2024
- nedis
Table of Contents
Tower Fan
with oscillation function
FNTR12CWT40
Information requirements for comfort fans
Description| Symbol| Value|
Unit
---|---|---|---
Maximum fan flow rate| F| 5.21| m’/min
Fan power Input| P| 4150| W
Service value| SV| 0.13| (m 3 /mlnyW
Standby power consumption| P s.| –| W
Off power consumption| P o,| 0| W
Fan sound power level| I-ft| 61.75| dB(A)
Maximum air velocity| C| 2.38| m/s
Seasonalelectricity consumption| Q| 13.28| Khiva
Measurement standard for service value| EN
60704-2-7:1998,
EN 60704-1: 2010H-A1 1: 2012 EN 50564: 2011
EN ISO 5801:2008
Quick start guide
Tower Fan
For more information see the extended manual online:
ned.is/fntr12cwt40
Intended use
The FNTR12CWT40 is a fan with 3 different speeds.
This product is exclusively intended as a fan for indoor use only.
The product is not intended for professional use.
This product can be used by children aged 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the
use of the product in a safe way and understand the hazards involved. Children
shall not play with the product. Cleaning and user maintenance shall not be
done
by children without supervision. This product is intended for use in household
environments for typical housekeeping functions that may also be used by non-
expert users for typical housekeeping functions, such as: shops, offices
other similar working environments, farmhouses, by clients in hotels, motels,
and other residential types environments and/or in bed and breakfast type
environments.
Any modification of the product may have consequences for safety, warranty,
and proper functioning.
Specifications
Product
|
Tower Fan
---|---
Article number| FNTR12CWT40
Dimensions (l x w x h)| 24 x 24 x 76 cm
Weight| 2500g
Input voltage| 220-240V~, 50Hz
Power input| 50 W
Main parts (image A)
- Fan unit
- Power cable
- Front base part
- Timer dial
- Rear base part
- a speed buttons
- Base fastening nut
- Oscillation button
Safety instructions
– WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not expose the product to direct sunlight, naked flames or heat.
- Do not use the product where splashing of water might occur, e.g. bathroom, swimming pool or close to a washbowl.
- Do not expose the product to water or moisture.
- Do not drop the product and avoid bumping.
- Do not open the product.
- Do not use a damaged product.
- Do not insert a hand or other objects in the fan grill.
- Keep the product out of reach from children.
- Children of less than 3 years should be kept away unless continuously supervised.
- Children aged from 3 years and less than 8 years shall only switch on/off the product provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the product or perform user maintenance.
- This product can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a Safeway and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
- Do not cover the product.
- Do not splash water onto the product.
- Do not let water enter the product.
- Do not place the product on moving vehicles or somewhere easy to be tipped over.
- Do not move the product during operation.
- Do not let the power cable hang over the edge of a table or counter, or touch hot surfaces.
- Keep the product far away from loose products (e.g. curtains, plastic bags, paper) that can cover the air inlet easily.
- Unplug the power cable when the product is not in use for a long time.
- When using an extension cord, use one which is as short as possible and fully extended.
- Do not use the product using an on/off timer or other equipment which can automatically switch the device on.
- Do not locate the product immediately below a power outlet.
- Unplug the product from the power source and other equipment if problems occur.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
- Do not use the product in rooms where flammable liquids or gases are used or stored.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Installing the product (image B)
- Turn the fan unit A1 upside down.
- Remove the base fastening nut A4 from A1.
- Assemble A3 to A2.
- Place the base parts A2A3 to A1.
- Guide the four pins of A1 through the holes of A2A3.
- Replace A4 to fasten A2A3.
- Guide the power cable A5 through the cable recess of A3.
- Turn the product back upright.
- Place the product on a flat surface close to a power outlet.
Using the product
1. Connect the power cable A5 to a power outlet.
| imer dial A6 | Rotate the timer dial to set the timer |
|---|---|
| Speed button A7 | Press one of the buttons to select the |
fan speed. – Press only one button at a time.
“0” = Off / “1” = Low / “2” = Mid/ “3” = High
Oscillation button A8| Press to activate the oscillation.
Press again to stop oscillation.
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>