MEDLINE Face masks, eyewear and N95 respirators Instructions

MEDLINE Face masks, eyewear and N95 respirators Instructions

Measuring fluid resistance, filtration and breathability, ASTM

categorizes masks into three levels

• For procedures producing low amounts of fluid, spray and/or aerosols.
  

• ASTM Level 2
  For procedures producing light to moderate amounts of fluid, spray and/or aerosols.
  

• ASTM Level 3
  For procedures producing moderate to heavy amounts of fluid, spray and/or aerosols.
  

To meet ASTM F2100-19 standards, our masks undergo a series of tests for

particle filtration (PFE), bacterial filtration (BFE), differential pressure or breathability (∆P) and fluid resistance.

| Level 1
Low fluids| Level 2
Light to moderate fluids
| Level 2
Moderate to high fluids
---|---|---|---
PFE at 0.1 micron
ASTM F2299| | |
BFE at 3.0 micron
ASTM F2101| | |
Delta P (∆P) mm H2
0/cm2
MIL-M-36954C| | |
Fluid resistance
(mmHg)| | |
Flammability| | |

• Fluid resistance
  
  Tests penetration resistance to synthetic blood at three protection levels—80 mm Hg, 120 mm Hg and 160 mm Hg.

• Particle filtration efficiency (PFE)
  
  Assesses filtration ability when tested against sub-micron particulate matter 0.1 microns in size—which is representative of some viruses.

• Bacterial filtration efficiency (BFE)
  
  Tests filtration ability against an aerosol containing bacteria 3.0 microns in size.

• Differential Pressure (∆P)

Gauges air flow from one side of a mask to the other, assessing breathability.

How small is a micron?
While an actual micron is not visible to the human eye, this magnified diagram demonstrates particulate size by comparing a micron to other common substances.

*Scale is approximate.

Made for comfort and protection

We know how much of your day is spent behind a mask, so we make ours with the most comfortable, effective materials possible.

• Smooth cellulose— used for inner and outer facings
  

• Soft spunbond polypropylene— used for inner and outer facings and for an extra layer of protection
  

• Meltblown middle layer— acts as the primary filtration system for the mask
  

• Silky thermalbond polypropylene— used for inner facings
  

Our ASTM level 3 face masks are constructed of four layers for protection, comfort and breathability.

Procedure face masks

• NON27381
  Cone mask (100% Polyester)

  • Headband
  • Molded style 50/bx, 6 bx/cs
    

• NON27120 Basic procedure mask
  Spunbond polypropylene outer, cellulose inner

  • Earloop style (50/bx, 6 bx/cs)
    

• NON27122 Basic procedure mask
  Spunbond polypropylene outer, thermalbond polypropylene inner

  • Earloop style (50/bx, 6 bx/cs)
    

• NON27375 Basic procedure mask
  Spunbond polypropylene outer, cellulose inner

  • Earloop style (50/bx, 6 bx/cs)
    

• NON27378 Basic procedure mask
  Spunbond polypropylene outer, thermalbond polypropylene inner

  •  Earloop style (50/bx, 6 bx/cs)
    

• NON27420EL Procedure mask with shield
  Spunbond polypropylene outer, thermalbond polypropylene inner

  • Earloop style
  • Anti-fog foam
  • Anti-glare strip
  • Anti-fog shield (25/bx, 4 bx/cs)
    

• NON27355 Low fluid protection procedure mask Spunbond Polypropylene outer and inner

  • Level 1 fluid resistant
  • Earloop style (50/bx, 6 bx/cs)
    

• NON27408EL Low fluid protection procedure mask Cellulose inner and outer

  • Level 1 fluid resistant
  •  Anti-fog foam
  • Earloop style (50/bx, 6 bx/cs)
    

• NON27412EL Maximum fluid protection procedure mask Spunbond polypropylene outer, thermalbond polypropylene inner

  • Level 3 fluid resistant
  • Anti-fog foam
  • Earloop style (50/bx, 6 bx/cs)
    

• NON27712EL Maximum Fluid Protection Procedure Mask Cellulose inner and outer

  • Level 3 fluid resistant
  • Anti-fog foam
  • Earloop style (50/bx, 6 bx/cs)
    

• NON27410EL Maximum fluid protection procedure mask with shield Spunbond Polypropylene outer, thermalbond polypropylene inner

  • Level 3 fluid resistant
  • Earloop style
  • Anti-fog foam
  • Anti-glare strip
  • Anti-fog shield (25/bx, 4 bx/cs)
    

• NON27710EL Maximum fluid protection procedure mask with shield Cellulose inner and outer

  • Level 3 fluid resistant
  • Earloop style
  • Anti-fog foam
  • Anti-glare strip
  •  Anti-fog shield (25/bx, 4 bx/cs)
    

Surgical face masks

• NON27402  Basic surgical mask Spunbond polypropylene outer, cellulose inner

  • Ties (50/bx, 6 bx/cs)
    

• NON27377 Basic surgical mask Spunbond polypropylene outer, thermalbond polypropylene inner

  • Ties (50/bx, 6 bx/cs)
    

• NON27385 Hypoallergenic surgical mask Cellulose inner and outer

  • Ties (50/bx, 6 bx/cs)
    

• NON27386
  Sensitive skin surgical mask Spunbond polypropylene outer, thermalbond polypropylene inner
  

  • Ties
    50/bx, 6 bx/cs
    

• NON27371A Adhesive surgical mask Spunbond polypropylene outer, cellulose inner

  • Ties
  • Adhesive anti-fog strip (50/bx, 6 bx/cs)
    

• NON27361A Aggressive adhesive surgical mask Spunbond polypropylene outer, cellulose inner

  • Ties
  • Aggressive adhesive anti-fog strip (50/bx, 6 bx/cs)
    

• NON27379A
  Film surgical mask Spunbond polypropylene outer, cellulose inner

  • Ties
  • Anti-fog film strip
    50/bx, 6 bx/cs
    

• NON27382
  Duckbill surgical mask Spunbond polypropylene outer, thermalbond polypropylene inner

  • Ties
  • Chamber style
    50/bx, 6 bx/cs
    

• NON27373A
  Duckbill surgical mask Spunbond polypropylene outer, cellulose inner

  • Ties
  • Anti-fog foam
  • Chamber style
    50/bx, 6 bx/c
    

• NON27411
  Duckbill surgical mask with shield  Spunbond polypropylene outer, cellulose inner

  • Ties
  • Anti-fog foam
  • Anti-glare strip
  • Anti-fog shield
  • Chamber style
    25/bx, 4 bx/cs
    

• NON27378A
  Comfort foam surgical mask Cellulose inner and outer

  • Ties
  • Comfort anti-fog foam strip
    50/bx, 6 bx/cs
    

• NON27600
  Horizontal surgical mask Spunbond Polypropylene outer,thermalbond polypropylene inner

  • Horiztonal ties
    50/bx, 6 bx/cs

• NON27600AG
  Horizontal surgical mask with shield Spunbond polypropylene outer, cellulose inner

  • Horizontal ties
  • Anti-fog foam
  • Anti-glare shield
    25/bx, 4 bx/cs
    

• NON27420
  Basic surgical mask with shield Spunbond Polypropylene outer, thermalbond polypropylene inner

  •  Ties
  •  Anti-fog foam
  •  Anti-glare strip
  •  Anti-fog shield
    25/bx, 4 bx/cs
    

• NON27408
  Low fluid protection surgical mask Cellulose inner and outer

  • Level 1 fluid resistant
  • Ties
  • Anti-fog foam
    50/bx, 6 bx/cs
    

• NON27405
  Low fluid protection surgical mask with shield Cellulose inner and outer

  • Level 1 fluid resistant
  • Anti-fog foam
  • Anti-glare strip
  • Anti-fog shield
    25/bx, 4 bx/cs
    

• NON27382FR
  Medium fluid protection duckbill surgical mask Spunbond polypropylene outer, thermalbond polypropylene inner

  • Level 2 fluid resistant
  • Anti-fog foam
  • Duckbill style
    50/bx, 6 bx/cs
    

• NON27411AG
  Medium fluid protection duckbill surgical mask with shield Spunbond polypropylene outer, thermalbond polypropylene inner

  • Level 2 fluid resistant
  • Anti-fog foam
  • Anti-glare strip
  • Anti-glare shield
  • Duckbill style
    25/bx, 4 bx/cs
    

• NON27412
  Maximum fluid protection surgical mask Spunbond polypropylene outer,thermalbond polypropylene inner

  • Level 3 fluid resistant
  • Ties
  • Anti-fog foam
    50/bx, 6 bx/cs
    

• NON27712
  Maximum fluid protection surgical mask Cellulose inner and outer

  • Level 3 fluid resistant
  • Ties
  • Anti-fog foam
    50/bx, 6 bx/cs
    

• NON27410
  Maximum fluid protection surgical mask with shield Spunbond Polypropylene outer, thermalbond polypropylene inner

  • Level 3 fluid resistant
  • Anti-fog foam
  • Anti-glare strip
  • Anti-fog shield
    25/bx, 4 bx/cs
    

• NON27710
  Maximum fluid protectionsurgical mask with shield Cellulose inner and outer

  • Level 3 fluid resistant
  • Anti-fog foam
  • Anti-glare strip
  • Anti-fog shield
    25/bx, 4 bx/cs
    

• NON27810
  Maximum fluid protection surgical mask with shield Cellulose inner and outer

  • Level 3 fluid resistant
  • Anti-fog foam
  • Anti-glare strip
  • Anti-fog shield
    25/bx, 10 bx/cs
    

Specialty face masks

• NONBUDDYTIE
  Buddy the Brave print
  surgical tie mask
  NONBUDDYEL
  Buddy the Brave print
  procedure mask
  Spunbond polypropylene outer, thermalbond polypropylene inner
  

• NONRIBBON
  Pink ribbon surgical tie mask
  NONRIBBONEL
  Pink ribbon basic procedure mask
  Cellulose inner and outer 50/bx, 6 bx/cs
  

Protective eyewear

• NONFS100
  Extra-long face shield
  40/cs
  NONFS300
  Full-length face shield
  24/bx, 4 bx/cs
  NONFS400
  3/4-length face shield
  24/bx, 4 bx/cs
  NONFS1000
  Extended width and length
  face shield
  24/bx, 4 bx/cs
  

• NONLENS
  Safety lenses
  250/cs
  NONFRAME
  Safety frames
  100/cs
  NONASMBLD
  Pre-assembled safety frames/lenses
  50/cs
  

• NON24775
  Goggles, anti-fog, indirect vent, elastic strap, clear frame
  36/bx
  NON24776
  Goggles, indirect vent, elastic strap, clear frame
  36/bx
  

• NON24770
  Safety glasses, clear frame
  144/cs
  NON24760
  Safety glasses, anti-scratch
  144/cs
  

• NON24774
  Safety glasses, clear with black frame
  12/b
  

• NON24777V
  Visitor glasses, large, clear frame
  144/cs

N95 Respirators

Fit instructions for N-95 particulate respirators

Place the respirator under your chin 1 with the nosepiece pointing up.

Hold the respirator under your chin with the nosepiece up. Stretch the top strap over your head right above your ears. Stretch the bottom strap and position below your ears.

Conform the nosepiece to the shape of your nose, and adjust the headbands for comfortable fit.

Cup both hands over the mask, checking for tightness, and inhale sharply. Negative pressure should be felt in the mask.

N95 Respirator mask accessories

• Complete fit test kits— One kit tests
  approximately 55 staff members
  Qualitative saccharin-based fit test kit
  NON24510—1 /ea
  Qualitative bitter-based fit test kit
  NON24510BTR—1 /ea

• Saccharin solutions
  Saccharin sensitivity solution
  NON24510A—6 /bx
  Saccharin fit test solution
  NON24510B —6/bx

• Bitter solutions
  Bitter fit test solution
  NON24510C —6/bx
  Bitter sensitivity solution
  NON24510F —6/bx

• Hoods and nebulizers
  Fit test hoods
  NON24510D —10/bx
  Fit test nebulizers
  NON24510E —3/bx

• NON27501
  NIOSH N95 adjustable particulate respirator mask
  Cellulose inner and outer

  • Level 3 fluid resistant
  • Adjustable size
    35/bx, 6 bx/cs
    

• NON24507A
  NIOSH N95 particulate respirator mask Polyester inner and outer

  • Level 3 fluid resistant
  • Cone style
  • Size: small
    20/bx, 12 bx/cs
    

• NON24506A
  NIOSH N95 particulate respirator mask Polyester inner and outer

• Level 3 fluid resistant

• Cone style

• Size: regular
  20/bx, 12 bx/cs
  

Index

|

Inner material

---|---
Item No.| Fluid resistance level (FRL)| Bacterial filtration efficiency (BFE)| Particulate filtration efficiency (PFE)| Outer material| Polyester| Cellulose| Thermalbond polypropylene| Spunbond polyporpylene
NON27381| | ≥99%| | 100% Polyester| | | |
NON27120| | ≥99%| ≥97%| Spunbond polypropylene| | | |
NON27122| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27375| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27378| | ≥99%| ≥97%| Spunbond polypropylene| | | |
NON27420EL| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27355| Level 1| ≥99%| ≥99%| Spunbond polypropylene| | | |
NON27408EL| Level 1| ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27412EL| Level 3| ≥99%| ≥99%| Spunbond polypropylene| | | |
NON27712EL| Level 3| ≥99%| ≥99%| Cellulose| | | |
NON27410EL| Level 3| ≥99%| ≥99%| Spunbond polypropylene| | | |
NON27710EL| Level 3| ≥99%| ≥99%| Cellulose| | | |
NON27402| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27377| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27385| | ≥99%| ≥97%| Cellulose| | | |
NON27386| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27371A| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27361A| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27379A| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27382| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27373A| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27411| | ≥99%| ≥99%| Spunbond polypropylene| | | |
NON27378A| | ≥99%| ≥97%| Cellulose| | | |
NON27600AG| | ≥99%| ≥97%| Spunbond polypropylene| | | |
NON27420| | ≥99%| ≥98%| Spunbond polypropylene| | | |
NON27600| Level 1| ≥99%| ≥97%| Spunbond polypropylene| | | |
NON27408| Level 1| ≥99%| ≥98%| Cellulose| | | |
NON27405| Level 1| ≥99%| ≥98%| Cellulose| | | |
NON27382FR| Level 2| ≥99%| ≥99%| Spunbond polypropylene| | | |
NON27411AG| Level 2| ≥99%| ≥99%| Spunbond polypropylene| | | |
NON27412| Level 3| ≥99%| ≥99%| Spunbond polypropylene| | | |
NON27712| Level 3| ≥99%| ≥99%| Cellulose| | | |
NON27410| Level 3| ≥99%| ≥99%| Spunbond polypropylene| | | |
NON27710| Level 3| ≥99%| ≥99%| Cellulose| | | |
NONBUDDYEL| | ≥99%| ≥99%| Spunbond polypropylene| | | |
NONRIBBONEL| | ≥99%| ≥98%| Cellulose| | | |
NONRIBBON| | ≥99%| ≥98%| Cellulose| | | |
CUR380| | ≥99%| ≥98%| Spunbond polypropylene| | | |

Face masks, eyewear and N95 respirators
Every protection level and preference

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>