U-PROX PIR Outdoor Wireless Outdoor Motion Detector User Manual
- June 5, 2024
- U-PROX
Table of Contents
- Functional parts of the device (see picture)
- TECHNICAL SPECIFICATIONS
- COMPLETE SET
- REGISTRATION
- RANGE TEST FOR OPTIMAL INSTALLATION LOCATION
- INDICATION IN RANGE TEST MODE
- DEVICE PLACEMENT
- INSTALLATION
- ANTI-MASKING CALIBRATION
- ANTI-MAKING
- BATTERY REPLACEMENT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WIRELESS OUTDOOR MOTION DETECTOR
Is a part of the U-Prox security alarm system
User manual
Manufacturer: Integrated Technical Vision Ltd.
Vasyl Lypkivsky str. 1, 03035, Kyiv, Ukraine
U-Prox PIR Outdoor – is a wireless outdoor motion detector with advanced
detection algorithms, digital temperature compensation of sensor, and an
antimasking system.
When the thermal balance of the environment changes, the device processes a
digital signal from two PIR sensors, filters noise and interference and sends
an alarm notification to the U-Prox control panel.
The device is connected to the control panel and is configured with the U-Prox Installer mobile application.
https://u-prox.systems/Installer
Functional parts of the device (see picture)
1. Device hood
2. Device case
3. Light indicator of the operation modes
4. Anti-masking diffuser #1
5. Fresnel lens
6. Anti-masking LED
7. Anti-masking diffuser #2
8. Fresnel lens| 9. Bracket for mounting
10. Bracket connector
11. Fixing screw
12. Tamper switch plate
13. Back of the device
14. Power button
15. Motion detection range adjuster
---|---
TECHNICAL SPECIFICATIONS
Working distances | 3 to 15 m |
---|---|
Detection angle | 90° |
PIR target detection speed | 0.2 to 5 m/s |
Optical noise immunity | > 6500 Lux |
Mounting heights | 0.9 to 1.10 m |
Pet immunity | weight up to 20 kg |
Power | 3V, two CR123A lithium batteries included |
The service life of the battery | up to 5 years |
Radiofrequency | ISM-band wireless interface with several channels |
ITU region 1 (EU, UA): 868.0 to 868.6 MHz,
bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
ITU region 3 (AU): 916.5 to 917 MHz,
bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
Communication| Secure two-way communication, sabotage detection, key – 256
bits
Operating temperature range| -20°C to +55°C
Dimensions no hood with a hood| 183.8 x 77.2 x 88.6 mm
180 x 70 x 62.5 mm
Weight| 290 grams
Case color| white
Protection class| IP55
COMPLETE SET
- U-Prox PIR Outdoor;
- Two CR123A batteries (pre-installed);
- Device hood;
- Mounting kit;
- Quick start guide
CAUTION. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS
WARRANTY
Warranty for U-Prox devices (except batteries) is valid for two years after
the purchase date.
If the device operates incorrectly, please contact
support@u-prox.systems at first, maybe it can
be solved remotely.
REGISTRATION
RANGE TEST FOR OPTIMAL INSTALLATION LOCATION
Due to the Grade 2 requirement, the RF link works with a reduction of power to 8 dB
INDICATION IN RANGE TEST MODE
DEVICE PLACEMENT
INSTALLATION
ANTI-MASKING CALIBRATION
ANTI-MAKING
Partial and full masking detection (70% – 100%)
BATTERY REPLACEMENT
https://www.u-prox.systems/doc_pirout
www.u-prox.systems/doc_pirout
www.u-prox.systems
support@u-prox.systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>