Dongguan B01PW Portable Power bank User Manual
- June 5, 2024
- Dongguan
Table of Contents
B01PW Portable Power bank
User Manual
Thank you for purchasing our products. For optimum performance and safety, please read this manual carefully before operating the Power Bank and keep this manual for future reference.
Layout
Specification
| Item | B01 PW |
|---|---|
| Output | 5V. 3A / 9V 2A / 12V ****1.5A |
| Input | 5V 3A / 9V 2A |
| Wireless Charging Function | 10W(max) |
| Dimensions | 6.1 x 2.9 x 0.9 in (15.5 x 7.5 x 2.4 cm) |
| Operating Temp Range | 32°F to 113°F (0°C to 45°C) |
Charge Your Phone or Tablet.
Recharge your Power Bank. (Use PD/QC adapter to achieve faster charging.)
When the
power bank is fully charged, the screen will show 100%. Please fully charge
the power bank by wall charger before the first use.
Digital LED screen shows the accurate readout.
How to
Charge Your Phone by Wireless Charging Function?
P.S. Your phone must be equipped with Qi charging function.
Press the Power Button to activate the wireless charging function, then the wireless charging indicator will light up. Place your phone on the wireless charging panel, making sure that the center of the phone is aligned with the center of the wireless charging panel. In this way, your phone will be charged within 2s, if not, please adjust the location of the phone.- The distance between the phone and the wireless charging panel must be less than 3mm, if the phone case is too thick, it will affect the wireless charging function.
- No metal objects, such as metal phone case, coins, metal sheets,s, etc., can be placed between the device to be charged and the wireless charging panel.
WARNING
- This product is not a toy, please keep it out of the reach of children to avoid accidents, please don’t let children use or play with it.
- Please note that this power bank can’t be used on rainy nor can it be washed or placed in water. If there is liquid penetrating into the product, it may cause a short circuit or damage, then please stop using it immediately and dispose of it properly.
- The operating temperature of this product is 32°F to 113°F (0°C to 45°C), so please don’t put it in temperatures above 140 (60°C). (Including places close to heat sources, such as stoves, heating, etc.)
- This product contains a Li-polymer battery, so it is strictly bidden to disassemble, squeeze and puncture the product and put it into water or fire, as this may result in damage to the battery, short circuit, fire, and burning.
- If there is a bulge, deformation, liquid leakage, overheating, or a significant drop in power, please stop using it immediately and dispose of it properly, contact us and we will offer you a replacement or a full refund.
- Please fully charge your Power Bank by a wall charger before first use.
- When charging your phone, please use the original cable of your phone to connect with the charger to achieve intelligent recognition and rapid charging.
- Fully charge the unit every 3 months to extend battery life.
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum 20cm distance between the
radiator and your body.