Medline Automatic Digital Blood Pressure Monitor MDS1001UT User Guide
- June 6, 2024
- MEDLINE
Table of Contents
Medline Automatic Digital Blood Pressure Monitor MDS1001UT User Guide
Please watch the following User Video on your computer by typing in the link
https://www.medline.com/sku/item/MDPMDS1001UT
Step 1 – Install Batteries
A) Slide battery cover off.
B) Install four (4) “AA” batteries.
Step 2 – Set Date and Time
A) Hold down the M button until 4 numbers start flashing at the top left.
B) Release the M button.
C) Press the M button repeatedly to change the year while the number is still
flashing.
D) Press the button one time to move to the month. Press the M button
repeatedly to change the month, while the number is still flashing.
E) Repeat step D three (3) times for the day, hour and minutes.
F) Press the button once to move to Talking Language selection. Press the M
button repeatedly to switch between OF (Off), 01 (English), and 02 (Spanish).
G) Press the button one time.
Step 3 – Cuff Placement
A) Place cuff on left arm at heart level (1 in. above elbow joint).
B) Align tubing with middle finger to ensure placement of Artery Mark (Ø) over
the brachial artery.
C) Plug the air tube connector into the air tube socket on the left side of
the monitor.
Step 4 – Body Placement
A) Sit with feet flat on floor.
B) Place arm, palm-up on flat surface.
C) Ensure cuff is level with heart.
Step 5 – Begin Measurement
A) Press to turn monitor on and automatically begin measurement.
Troubleshooting Guide
1) Does Not Turn On
- Check that batteries are inserted.
- Check that the battery polarities (+ and – symbols) are positioned in the correct direction.
- Try inserting new batteries.
**2) Inaccurate Reading***
- Refrain from eating, smoking and drinking (especially alcoholic beverages) before a measurement. These activities can affect your blood pressure.
- Check the cuff for a snug fit that can fit two fingers between the cuff and your upper arm.
- Ensure that you are not moving, speaking or repositioning during measurement.
- If taking multiple measurements, ensure you are waiting at least 5 minutes between readings.
3) Inflation Problem
- Ensure the air tube connector is fully plugged into the air tube socket on the left side of the monitor.
- Ensure that cuff is snug enough to where it will not slide up or down the arm.
- Confirm that you are remaining still during measurements.
- Ensure the cuff is fully deflated before taking a measurement.
- Make sure cuff hose remains straight and unkinked during measurement.
*Other things can affect blood pressure values besides those listed here.
IMPORTANT!
You can STOP the inflation or deflation of the cuff at any time by pressing
the button.
Please see User Manual for more details.
If you have any questions or are experiencing difficulties, please call the
Medline Service
Center at 1-800-MEDLINE
(1-800-633-5463). V2 RD21DGA
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>