MEDLINE MSC60090 Comfort GLIDE Air Blower User Manual

MEDLINE MSC60090 Comfort GLIDE Air Blower User Manual

IMPORTANT SAFEGUARDS

Do not use Comfort Glide Air Blower in the presence of flammable anesthetics.

Precaution – Comfort Glide Repositioning Sheet:

1. Caregivers must verify that all caster brakes on the bed have been engaged prior to patient movement.
2. For safety, always use at least two people during patient movement.
3. Never leave patient unattended on an inflated device.
4. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
5. The Comfort Glide Repositioning sheet is designed to be used with 1 Air Blower.

Precaution – Comfort Glide Air Blower – To reduce the risk of burns,

electrocution, fire or injury to persons:

1. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
2. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it is has been dropped or damaged, or ropped into water.
3. Keep the cord away from heated surfaces.
4. Never drop or insert any object into any openings.
5. Route the power cord in a manner to ensure it is free from hazards.
6.  Disconnect from power supply circuit before opening.
7. Keep Comfort Glide Air Blower away from sources of liquid and open flames.
8. The Air Blower needs to be used with a stable power supply or in conjunction with a UPS

THE PURPOSE OF THIS MANUAL

This operation manual is mainly focused on the set-up, cleaning and routine maintenance of the Comfort Glide Air Blower. We recommend keeping this manual handy to answer questions related to the system.

PRODUCT DESCRIPTION – INTENDED USE

The Comfort Glide Air Blower is a component of the Comfort Glide air system designed to help clinicians safely reposition and move patients.
The system has been designed to reduce risks and make patient repositioning and transfers easier and safer.

GENERAL SAFETY

It is important to read the information in this user manual before you use your Comfort Glide Air Blower.
Please follow the guidelines below for your added safety and maintaining system performance.
Avoid exposing the Air Blower to flammable anesthetics.

DEVICE FEATURE

Part Identification:

INFLATING COMFORT GLIDE AIR SHEET

a. Patient should be in a supine position with the bed at a 0 degree incline
b. Place Comfort Glide Air Sheet underneath the patient.
c. Place the Comfort Glide Air Blower directly on flat ground or use the carabiner to hang the unit on the bed frame.
d. Plug the power cord into the nearest standard wall outlet
e. Connect the air hose to one side of the Comfort Glide Air Sheet air intake opening and securely fasten into place. Choose the air input on the side that will permit free movement of the hose.

CAUTION: It is important to routinely inspect power cable to ensure it is not obstructed or causing a tripping hazard. Check the power cable is not under strain or damaged.

f. If using for lateral transfer, ensure that transfer surfaces are touching and lock all wheels.
g. Turn on the green power switch and the air blower will inflate the Comfort Glide Air sheet. When the Comfort Glide Air sheet is fully inflated, the sheet is ready to use and the patient can be
repositioned.
h. Ensure patient is centered on the surface prior to deflation.
i. Turn off Air Blower and raise the bed or stretcher rails.

CAUTION: Never leave the patient unattended with the Air Blower on.

MAINTENANCE & TROUBLESHOOTING

No daily maintenance is required. It is intended this equipment should only be serviced by qualified and authorized technical personnel. Please contact your Medline representative if the below troubleshooting solutions do not work

Check power cord plug is securely connected and fits snugly into the outlet. Secure plug connection and turn on Air Blower power switch.
Blown fuses in pump and plug.| Check for blown fuses in pump and plug. Replace fuse if blown.
Power outlet is faulty.| Try another power outlet.
Defective Air Blower Unit.| Replace with new device. Contact your Medline representative.
The Comfort Glide Repositioning Sheet cannot be inflated.| Hose not properly connected.| Verify that the hose is properly con- nected to the Air Blower. The hose has 2 prongs that snap into place to connect it to the Air Blower unit.
Air Flow is not sufficient.| 1.     Check hose connection points and re- connect if needed.

2.    Check hose for tears or kinking.

3.    Check for punctures or rips in the Comfort Glide Air Sheet.

4.    Check the air filter for re- strictions. Clean/replace as necessary.

WARNING: Disassembly or attempts to make repairs may void
Manufacturer’s Warranty. Please consult the Statement of Warranty in this Manual for more information.
If the problem is not resolved, please contact your Medline representative

CLEANING & DISINFECTION PROTOCOL

1. Please follow your facility’s guidelines for cleaning and disinfecting the Comfort Glide Air Blower. Ensure that the power unit is off.

2.  Unplug the power cord from the wall outlet.

3.  Examine the surface of the Air Blower for visible dirt and other substances.

4.  Refer to your Bio-Medical Engineering or Infection Prevention
   Department for your facility’s protocol for cleaning and disinfecting.

5. Perform the following steps to clean the power unit and hose fittings:
   – Wipe all controls, chassis and hose fittings with a damp cloth and a mild detergent.
   – Air dry all treated surfaces.

GENERAL DISASSEMBLY OF PARTS

Before disassembling any parts, ensure that the power unit is off and unplug the power cord from the wall outlet.

1.  Changing the air hose:
   a. Use a flathead screwdriver to disconnect the prongs on the hose from the blower unit.
   
   b. Push the hose out to replace with a new one.
   

2. 2. Changing filter:
   a. Unscrew 3 screws on the bottom cover.
   
   b. Open the filter cover and identify the filter.
   
   c. Replace the filter and assemble the parts in reverse order
   

WARNING: Switch off the electrical supply to the pump and disconnect the power cable from the electrical outlet before cleaning and inspection.
All equipment should be inspected. Any item that is visibly dirty should be properly cleaned or removed. It is recommended that the system is cleaned regularly and after each patient use.

SPECIFICATION

Control unit Specification

content/uploads/2022/12/MEDLINE-MSC60090-Comfort-GLIDE-Air-Blower-User- Manual_8.jpg)
Environment (Temperature)| Operation: 15 oC to 35 oC (59 oF to 95 oF)
Storage: 5 oC to 60 oC (41 oF to 140 oF)
Environment (Humidity)| Operation: 30% to 75% non-condensing
Storage: 30% to 90% non-condensing
Filter Air| 5 microns
Operation Atmospheric Pressure Range| 700 hPa to 1060 hPa
Operation altitude| -1017 feet to 9,843 feet
Test Standard| IEC60601-1, IEC60601-1-2

WARNING: Medical electrical equipment needs special precautions regarding EMC and needs to be installed according to the EMC information provided. Careful consideration of this information is
essential when stacking or collocating equipment and when routing cables and accessories.
WARNING: RF mobile communications equipment can effect medical electrical equipment.

ELECTROMAGNETIC COMPATIBILITY

Electric devices may interact due to electro-magnetic radiation. We recommend a safety distance of at least 1 meter, especially for sensitive equipment. Upon request, we can provide a table with more detailed electromagnetic information.

Recommended separation distances between

portable and mobile RF communications equipment and the Comfort Glide Air Blower

The Comfort Glide Air Blower is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Comfort Glide Air Blower can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the Comfort Glide Air Blower as rec- ommended below, according to the maximum output power of the communications equipment.
Rated maximum output power of transmitter

W

| Separation distance according to frequency of transmitter m
150 kHz to 80 MHz

d = 1,2

| 80 MHz to 800 MHz

d = 1,2

| 800 MHz to 2,7 GHz

d = 2,3

0,01| 0,12| 0,12| 0,23
0,1| 0,38| 0,38| 0,73
1| 1,2| 1,2| 2,3
10| 3,8| 3,8| 7,3
100| 12| 12| 23
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where p is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Manufacturer’s declaration – electromagnetic emissions

The Comfort Glide Air Blower is intended for use in the electromagnetic environment (for profes- sional healthcare) specified below.

The customer or the user of the Comfort Glide Air Blower should assure that it is used in such an environment.

Emissions test| Compliance| Electromagnetic environment- guidance (for professional healthcare environment)
RF emissions CISPR 11| Group 1| The Comfort Glide Air Blower uses RF energy only for its internal function.

Therefore, its RF emissions are very low

and are not likely to cause any interference in nearby electronic equipment.

RF emissions CISPR 11| Class A| The Comfort Glide Air Blower is suitable for use in all establishments other than domestic establishments and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes.
Harmonic emissions IEC 61000-3-2| N/A
Voltage fluctuations/ flicker emissions

IEC 61000-3-3

| N/A
Manufacturer’s declaration – electromagnetic immunity

The Comfort Glide Air Blower is intended for use in the electromagnetic environment (for professional healthcare) specified below.

The customer or the user of the Comfort Glide Air Blower should assure that it is used in such an environment.

Immunity test| IEC 60601

test level

| Compliance level| Electromagnetic environment

-guidance (for professional healthcare environment)

Electrostatic discharge (ESD) IEC 61000-4-2| Contact:±8 kV Air±2 kV,±4 kV,

±8 kV,±15 kV

| Contact:±8 kV Air±2 kV,±4 kV,

±8 kV,±15 kV

| Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30%
Electrical fast transient/burst IEC 61000-4-4| ± 2 kV for power supply lines

± 1 kV for input/ output lines

| ± 2kV for power supply lines Not applicable| Mains power quality should be that of a typical professional healthcare environment.
Surge

IEC 61000-4-5

| ± 0.5kV, ± 1kV

line(s) to line(s)

± 0.5kV, ± 1kV,

± 2kV line(s) to earth

| ± 0.5kV, ± 1kV

line(s) to line(s) Not applicable

| Mains power quality should be that of a typical professional healthcare environment.
Voltage Dips, short interruptions and voltage variations on power supply input lines

IEC 61000-4-11

| Voltage dips:

0 % UT; 0,5 cycle

0 % UT; 1 cycle

70 % UT; 25/30 cycles

Voltage interruptions: 0 % UT;

250/300 cycle

| Voltage dips:

0 % UT; 0,5 cycle

0 % UT; 1 cycle

70 % UT; 30 cycles

Voltage interruptions: 0 % UT; 300 cycle

| Mains power quality should be that of a typical professional healthcare environment. If the user of the Comfort Glide Air Blower requires continued operation during power mains interruptions, it is recommended that the Comfort Glide Air Blower be powered from an uninterruptible power supply or a battery.
Power frequency (50, 60 Hz)

magnetic field IEC 61000-4-8

| 30 A/m

50 Hz or 60 Hz

| 30 A/m

60 Hz

| The Comfort Glide Air Blower power frequency magnetic fields should be at levels characteristic of a typical location in a typical profes- sional healthcare environment.
---|---|---|---
NOTE: UT is the a.c. mains voltage prior to application of the test level.
Manufacturer’s declaration-electromagnetic immunity Test specifications for ENCLOSURE PORT IMMUNITY to RF wireless communications equipment

The Comfort Glide Air Blower is intended for use in the electromagnetic environment (for professional healthcare) specified below.

The customer or the user of the Comfort Glide Air Blower should assure that it is used in such an environment.

Test frequency (MHz)

|

Band a) (MHz)

|

Service a)

|

Modulation b)

|

Maximum power (W)

|

Distance

| IMMUNITY TEST LEVEL

(V/m)

| Compliance LEVEL

(V/m)

(for professional healthcare)

385

|

380-390

|

TETRA 400

| Pulse modulation b) 18 Hz|

1 , 8

|

0 , 3

|

27

|

27

450

|

430-470

| GMRS 460,

FRS 460

| FM c)±5 kHz deviation 1 kHz sine|

2

|

0 , 3

|

28

|

28

710|

704-787

|

LTE Band 13,

17

|

Pulse modulation b) 217 Hz

|

0 , 2

|

0 , 3

|

9

|

9

745
780
810|

800-960

| GSM 800/900, TETRA 800,

iDEN 820,

CDMA 850,

LTE Band 5

|

Pulse modulation b) 18 Hz

|

2

|

0 , 3

|

28

|

28

870
930
1720|

1700-

1900

| GSM 1800;

CDMA 1900;

GSM 1900; DECT;

LTE Band 1, 3,

4, 25; UMTS

|

Pulse modulation b) 217 Hz

|

2

|

0 , 3

|

28

|

28

1845
1970

2450

|

2400-

2570

| Bluetooth, WLAN,

802.11 b/g/n, RFID 2450, LTE Band 7

|

Pulse modulation b) 217 Hz

|

2

|

0 , 3

|

28

|

28

5240|

5100-

5800

|

WLAN 802.11

a/n

|

Pulse modulation b) 217 Hz

|

0 , 2

|

0 , 3

|

9

|

9

5500
5785
NOTE : If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmitting antenna and the ME EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m test distance is permitted by

IEC 61000-4-3.

a.        For some services, only the uplink frequencies are included.

b.        The carrier shall be modulated using a 50 % duty cycle square wave signal.

c.         As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it does not represent actual modulation, it would be worst case.

Manufacturer’s declaration – electromagnetic immunity

The Comfort Glide Air Blower is intended for use in the electromagnetic environment (for professional healthcare) specified below. The customer or the user of the Comfort Glide Air Blower should assure that it is used in such an environment.
Immunity test| IEC 60601 test level| Compliance level| Electromagnetic environment-guidance (for professional healthcare environment)
Conducted RF

IEC 61000-

4-6

| 3 Vrms:

0,15 MHz – 80 MHz

6 Vrms:

in ISM bands between 0,15 MHz and 80 MHz

80 % AM at 1 kHz

| 3 Vrms:

0,15 MHz – 80 MHz

6 Vrms:

in ISM bands between 0,15 MHz and 80 MHz

80 % AM at 1 kHz

| Portable and mobile RF communications equipment should be used no closer to any part of the Comfort Glide Air Blower including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter.
Radiated RF

IEC 61000-

4-3

| 3 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

| 3 V/m

80 MHz – 2,7 GHz

80 % AM at 1 kHz

| Recommended separation distance:

d = 1,2

d = 1,2      80 MHz to 800 MHz

d = 2,3  800 MHz to 2,7 GHz

| | | Where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in metres (m).
| | | Interference may occur in the vicinity of equipment marked with the following symbol:
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

WASTE DISPOSAL

This Product has been supplied from an environmentally aware manufacturer that complies with the Waste Electrical and Electronic Equipment Directive (WEEE).
This product may contain substances that could be harmful to the environment if disposed of in places (landfills) that are not appropriate according local regulations. Please be environmentally responsible and recycle this product through your recycling facility at its end of life.

STORAGE AND CARE

Comfort Glide Air Blower:

• Check the power cord and plug for abrasions or excessive
• Plug in the unit and verify air flows from the units hose connection ports
• Place in box for storage

It is recommended the following guidelines are used whenever this sys- tem is being stored or transported another location:
Temperature limitations: 5 oC to 60 oC (41 oF to 140 oF) Relative Humidity: 30% ~90%

EXPECTED SERVICE LIFE

The Comfort Glide Air Blower has an expected service life of two years. Replace the air filter every 6 months. Do NOT use unapproved accessories or attempt to modify, disassemble or otherwise misuse the device.

WARRANTY

• The manufacturer warrants this equipment to be free from defects in material and workmanship for 2 years from the date of
• At Manufacturer’s discretion, we agree to service, repair or replace any equipment or part found to be defective at no
• This warranty excludes equipment damaged through shipping, tampering, improper maintenance, carelessness, accidents, negligence, misuse, or which has been altered, repaired or dismantled other than with the manufacture’s written authorization and by its approved procedures and by properly qualified
• In no event shall the manufacturer be liable for any direct, indirect or consequential damage or loss resulting from the use of

Medline Industries, LP, Three Lakes Drive, Northfield, IL 60093 USA
Medline United States
1-800-MEDLINE (633-5463)
www.medline.com | info@medline.com

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>