Dacom HF002 Headphones User Manual

: June 4, 2024
: Dacom

Table of Contents

Description
Product Guide
Function&Operation
Safety Precaution
After-sales service and instructions
Warranty card
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HF002 Headphones
User Manual

Description

Style: Over ear headphones
Bluetooth Version: B15.0
Impedance: 320
Sensitivity: 106dB
Frequency Range:2OHZ-2OKHZ
Effective distance: 10 meters/33ft
Battery capacity 1200mAh,3.7 V
Battery type: Rechargeable Lithium polymer battery
External voltage: DC4.8-5.5 V
Supporting agreement: A2DP/HFP/HSP/AVRCP

Product Guide

Function&Operation

Power on: In the off state, pull the switch to ON, the green light is on for 1 second, and the headset is turned on.
Power off: In the off state, pull the switch to OFF, the green light is on for 1 second, and the headset is turned off.
Bluetooth Pairing Mode: When you open this headset and hear Tower on, It will enter pairing mode. Search “HF002″ on your device and click it to pair, with the voice prompt ” Connected.
Answer call: Short press the MODE button to answer the call Refuse a call: long press the MODE button for about 1 second to ignore an incoming call.
Call hang up: Short press the MFB button to hang up the Call.
Last number redial: Double click the MODE button to call the last number when it is connected to your cellphone
Music Playing: Press the Mode button to stop and restart the Music playing.
Answer mode switching: During a call, long press the V+ key for about 1 second to switch between the headset and the mobile phone. Enter mute status: Short press “V+” and “V-” at the same time in calling status to open or close mute status.
Voice dialing: Press the MODE button for 1 second on Standby status to trigger voice dial, Turn on the phone voice assistant “Siri
Volume up: Press V+ to volume up and when it reaches Maximum volume with the voice prompt “du-“.
Volume down: Press V- to volume down and when it reaches Minimum volume with a voice prompt “du-“.
Trackback: Press and hold the “V-a button for 2 seconds to play the previous song.
Track forward: Press and hold the “V+” button for 2 seconds to play the next song.
Change the voice prompt language: Press the `V-1′ button and the “V+” button at the same time for 3 seconds in power-on status. Clear pairing: Long press the MODE button and -V+” at the same time for 3 seconds in Power-on status to clear pairing information.
Connect with two devices:

Turn off the Bluetooth function in the first cellphone when connected;
Then pair the headphone to the second cellphone;
Tum on the Bluetooth function of the first cellphone and connect to the Bluetooth by hand again.

Charging status: The red light on the headphones is on when charging and off when fully charged.
Automatically connect

In pairing range, the headphones will automatically connect to the last paired devices in memory.
When you walk away when it calling or playing and it is disconnected, it will also automatically be reconnected when you enter in the pairing range in 3 minutes.

Safety Precaution

Do not tear down or modify the earphone. Or it might be damaged or malfunctioned. Losses due to resort are not under warranty.
Do not use in the environments where Ingress Protection (IP) rating exceeds limitation or expose to excess humidity. Damages resulting from the liquid are not under warranty.
Do not expose the earphones in extreme weather (below 0°C degrees or above 45°C degrees).
Keep the earphones indicating light away from children or animal eyes.
Do not use the earphone in thunderstorm weather which might cause malfunction and increase the risk of electric shock.

After-sales service and instructions

The product contains a built-in lithium battery. To avoid an explosion, please do not expose the product to intense sunlight, and keep it away from the fire. Dispose of the lithium battery according to your local laws and regulations, do not dispose of it as regular household garbage. Unless a special instrument is given in your manual or quick start manual, the lithium battery should not be taken out or replaced by the user, or the product might be damaged and cause other dangers.