Dacom G84 Bonebuds Bone Conduction Headphones Instruction Manual

Dacom G84 Bonebuds Bone Conduction Headphones Instruction Manual

Touch Button Function

Accessories

Product Parameter

• Bluetooth Version: BT 5.0
• Sensitivity: 98dB±3dB
• Frequency Response Range: 20Hz-20KHz
• Effective Distance: about 10m
• Rated Voltage: DC 5V
• Supported Agreement: HSP / HFP / A2DP / AVRCP.

Warming Tips

As the picture 1 shows,take off the insulating film from the charging contact point for the first using,we suggest charging the earbuds at least 30mins before use them.

Ear wing assembly guide

1. See picture 2: Install point A of the eartip to the point A of the earbud to match it in the right place. The left and right eartips are accembled in the same method.
2. There is an extra pair of ear wing,you can choose your comfortable wearing mode.
   

Operating instructions

Turn on/turn off

Turn on:

1. Take the headphone out off the charging case and the headphone will turn on automatically.
2. Press and hold the MFB button for 3 seconds to turn it on under the powered off state.

Turn off:

1. The headphone will turn off automatically and start charging when it being placed back in the charging case.
2. Press and hold the MFB button for 5 seconds to turn it off under the powered on state.

Bluetooth Pairing

1. Take 2 earbuds out of the charging case,the left and right earbuds will power on and pair with each other automatically,the indicator light will flash red and green alternately then go into pairing state.
2. Turn on the bluetooth from the mobile phone,search for the pair name” bonebuds” on the phone and click to pair it. When hearing the tone, the earbuds are connected with the mobile phone successfully.
3. If the earbuds were connected with mobile phone before,the earbuds will connect with mobile phone automatically while turn on earbus.

Remarks:
If those 2 earbuds will not pair with each other, please touch the MFB button until the red and green indicator light flashes alternately, then double-touch BOTH earbuds’ MFB buttons at the same time.

Left earphone

• Click the MFB Button
  Answer The Call/Reject The Call/Play/Pause
  Double-Click The MFB Button
  Previous Song/TWS Pairing State/Language Switch
  3 x touch: Volume Down
  

• Long Press
  Reject The Call/Voice Assistant(SIRI)

Right earphone

• Click the MFB Button
  Answer The Call/Reject The Call/Play/Pause
  Double-Click The MFB Button
  Next Song/TWS Pairing State/Language Switch
  3 x   touch: Volume Up
  Long Press Reject The Call/Voice Assistant(SIRI)

• Clear Pairing Information
  When the TWS is under pairing state, triple-press one of earbuds’ s MFB button ,and the paired information is cleared.

• Forced Reset
  When the earbuds turn on/off,press and hold the MFB button for 8 seconds in charging state,the earbuds will be reseted.

• Turn On/Off The Flash Light
  When the tws is under connection state,press the one of earbuds’ s MFB button 4 times to turn on/off the flash light.The left and right earbud are synchronously. NOBTE :The flash light does not work when using only one of the eabuds. U

• Low Battery Voltage Warning
  Under all kinds of power on state, when the battery voltage is lower than 3.3v and the red light flashes once in 30 seconds ,that means the battery voltage is too low.

• Earbuds Charging
  The red light is always on while charging,and the red light will be off after full charging.

• Charging Case Charging
  The green light will flash when the charging case is under charging,and the green light will turn off after full charging. Please note:The charging case charging and battery indicates : One Grid 25% Two Grids 50% Three Grids 75% Four Grids 100%

SAFETY PRECAUTION

• Do not detach or modify the earphone, otherwise it might get damaged or malfunctioned. Defectives under this category are not included for warranty.
• Do not expose the device into water or other liquid, otherwise it might get damaged or malfunctioned. Defectives caused by liquid inside are not included for warranty.
• Do not expose the earphone in extreme humidity or extreme temperatures (below 0 °C or above 45°C ).
• Avoid putting the indicator light near children eyes or animal eyes.
• Do not use the earphone in thunderstorm weather which might cause malfunction and increase the risk of electric shock.

WARRANTY SERVICE AND DESCRIPTION
The date of purchase is subject to the purchase invoice, and if the valid invoice cannot be provided, the date of manufacture shall prevail. Quality issues do not include user’ s subjective judgment on sound quality. The warranty does not include plastic, manual and packaging. For those models that have been stopped for production, the company warrants for repairing the functions only. Our company does not take any responsibility for the commitments dealers made to you but not within our company commitments.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>