Dacom Explore E60 Bone Conduction Sport Bluetooth Headset User Manual

June 6, 2024
Dacom

Dacom Explore E60 Bone Conduction Sport Bluetooth Headset User Manual
Dacom Explore E60 Bone Conduction Sport Bluetooth
Headset

Function Operation Indication Diagram

Indication Diagram

Packing List

Packing List

Product Information

Earphone Model: Explore E60
Bluetooth Version: V5.0
Driver: Bone Conduction
Effective distance: about 10 meters
Operation Distance: About 1DM
Battery Type: Rechargeable Polymer Lithium Battery
Input Voltege:DC4.8-5.5V
Support Protocol:A2DP/HFP/HSP/AVRCP

Wear Introduction

Wear Introduction

Basic Function

Power On

In the off state, press and hold the MFB button for 3 seconds, the blue light flashes once, and the earphone is powered on.

Power Off

  1. In the on state, press and hold the MFB button for 4 seconds, the red light stays on 2 seconds, and the earphone is powered off.
  2. In the unconnected standby state, it will automatically power off after 5 minutes, and the red light will stay on for 2 seconds.

Pairing Mode

In the off state, press and hold the MFB button for 5 seconds, the earphone is powered on and the red and blue lights flashing alternately to enter the pairing state,tum on the Bluetooth of the cellphcme, search for the device ‘Explore-E60’ and dick on it. After hearing the tone ‘Connected’, the earphone Is successfully connected to the mobile phone.

Pairing Mode

Music Switching

In the state of listening, press and hold thenif’button for 2 seconds to play the next song; press and hold the”V-“button for 2 seconds to play the previous sons.

Music Switching

Volume Control

In the state of calling or listening, single dick thell+Thutton to increase the volume; click thent-‘button to decrease the volume.

Music Play/Pause
In the state of music, single click the MFB button to play/pause the music.

Answer the call
In the incoming call state, single touch the MFB button to answer the call.

Hang Up the Call
While calling or outgoing call, single touch the MFB button to hang up the call.

Reject the Call
In the incoming call state, press and hold the MFB button for 2 seconds to reject the call.

Night Running LED
In the state of powering on and connected, press the MFB button for 4 consecutive times to turn on or off the night running LED light effect.

Night Running LED

Sport Mode
In the state of listening, Press the V+ and V- buttons at the same time for 2 seconds to turn on or off the sports mode sound effect.

Voice Assistant
In the connected standby state, press and hold the MFB button for 2 seconds to active the voice esslstant(or Sirl)
Note: The voice assistant needs device support, and the voice assistant permission must be turned on on the device side.

Reset
In the charging state, press and hold the MFB button for 5 seconds to clear all pairing Information.

Fully Charged
The red light stays on when charging, the blue light stays on when It Is fully charged.

SAFETY RULES

Do not remove or modify the headset for any reason, as It may cause the headset to malfunction or burn out. These are not covered by the warranty. Do not let the device get wet with liquid, otherwise it will cause serious damage to the device, damage caused by water In the device, the manufacturer will not provide warranty.

Do not place the device in an environment where the temperature is too high or too law(below(t or above 45°G).
Avoid using the device lights near the eyes of children or animals.
Do not use the device during thunderstorms. Thunderstorms can cause the device to malfunction and Increase the risk of electric shock.

AFTER-SALES SERVICE AND INSTRUCTINONS

The date of pirchase is subiact to the invoice of the vouctier purchase, and If the valid certificate cannot be provided, the date of manufacture shall prevail. Quality issues do not include subjective differences in user quality, tone, and so on.
The casing, Instructions and packaging are not covered by the warranty. For models that have been discontinued, the company only performs functional recovery.
The company does not assume any responsibility for the non-company commitments made by the distributor.

Company: Shenzhen Mengda Network Technology Co., Ltd. Add: Workshop 403, No.1012, Barbalegang Avenue, Satan, Longgang District Shenzhen, China.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Dacom User Manuals

Related Manuals