Dacom FreeBeats Open TWS Earphone User Manual

Dacom FreeBeats Open TWS Earphone

Button Function

Packing List

• Earphone *2

• Charging Case *1

• Charging Cable *1

• Manual *1

How to connect

1. Please keep the distance between the Bluetooth headset and the mobile phone (or other connected devices) within 1 meter, the closer the better;
2. Open the charging case, the l/R earphone to automatically pair, the pairing time is 3~5 seconds, prompt slow flash, wait connect Bluetooth devices; If the pairing is not successful for 3 minutes, the headset will go into a shutdown state.
3. Turn on the user’s mobile phone Bluetooth function (or other Bluetooth devices), search or scan, at this time the mobile phone will search for nearby Bluetooth device, click on the searched headset name: H11, after successful connection, you can make a mobile phone call at this time, listen to songs;
4. After the phone and Bluetooth are successfully connected, the device will automatically shut down after 5 minutes of disconnection from a distance;
   If the headset is not connected for 5 minutes, the headset will automatically shut down.

Earphone operation mode (power on and pairing)

Boot up

|

1. Open the charging case, the earphones to automatically tum on IJR automatic pairing
2. 1/R ear press and hold for 3 seconds (in the shutdown state)

---|---

Shut down

|

1.  After the earphone L/R is placed in the charging case, it will automatically turn off
2. 1/R ear press and hold for 5 seconds (in the power on state) and the device is invalid after connecting

Earphone operation mode (call control)

Call answer

| Press 2 times (L/R) on the touch area to answer the call
---|---
Call hang up|

Press 2 times (L/R) to touch area to hang up the phone

Incoming call rejection

| The ear lever long presses and holds for 3 seconds (l/R)) to touch area to reject incoming calls
Voice assistants|

Long press the ear handle on the left for 2~3s to enter the voice assistant

Earphone operation mode (playing music)

Play/ Pause

|

Press 2 times (L/R) on the touch area

---|---

Previous piece

| Press 3 times (L) on the touch area
Next track|

Press 3 times (R) on the touch area

Game mode

|

The ear lever long presses and holds for 3 seconds {R) to touch area cut-in game mode

Volume+

| Press 1 time (R) on the touch area to vol+
Volume-|

Press 1 time (L) on the touch area to vol-

Charging case LED screen indicator status indication

Product status

|

Indicator light definition

---|---

Headphones in/out of the charging case

| The earphones enter/ exit the charging case, and the corresponding power white light flashes 1 time each.

Charging in the charging case

|

1. Four white lights are on for 1s at the same time.
2. When charging a charging case with less than 25%power, the charging compartment indictor light is from left to right The right cycle flashes, when the power reaches 25% the 25% power indictor is long, it will automatically jump to 50% power indictor for charging, the charging compartment indictor flashes cyclically from left to right, when the power reaches 50% the 50% power indictor is long. 75% charge and 100% charge are repeated in the above way, and the charging is cycled in turn.

Charging complete

|

The charging compartment 1s 100%, fully charged and four white lights are always on.

The charging compartment doses the lid to charge the headphones

|

The earphone enters the charging compartment and Cloes the cover to charge, the power white light flashes 1 s and goes off

Charging case low battery prompt

|

The charging compartment battery is low – the corresponding 25% charge light flashes quickly.

Charging case full battery prompt

|

The charging compartment is 1 CJ00/4 fully charged and four white lights are always on.

SAFETY PRECAUTION

• Do not detach or modify the earphone, otherwise it might get damaged or malfunctioned. Defectives under this category are not included for warranty.
• Do not expose the device into water or other liquid, otherwise it might get damaged or malfunctioned. Defectives caused by liquid inside are not included for warranty.
• Do not expose the earphone in extreme humidity or extreme temperatures (below 0 °c or above 45°C ).
• Avoid putting the indicator light near children eyes or animal eyes.
• Do not use the earphone in thunderstorm weather which might cause malfunction and increase the risk of electric shock.

WARRANTY SERVICE AND DESCRIPTION

The date of purchase is subject to the purchase invoice, and if the valid invoice cannot be provided, the date of manufacture shall prevail. Quality issues do not include user’ s subjective judgment on sound quality.
The warranty does not include plastic, manual and packaging. Forthose models.
that have been stopped for production, the company warrants for repairing the functions only.
Our company does not take any responsibility for the commitments dealers made to you but not within our company commitments.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>