Dacom G91 True Wireless ANC Bluetooth Earphones User Manual

True Wireless ANC Bluetooth Earphones
TinyPods ANC Manual
FCC ID: 2ATQU-TINYPODSANC

Function of Button

Accessor List

Product Parameter

Bluetooth Version: ST 5.0
Sensitivity: 95dB±3dB
Frequency Response Range: 20Hz-20KHz
Operation Distance: About 10M
Input Voltage: DC 5V
Support Protocol: FISP Fi13 / A2DP / AVRCP

Function Operation Introduction

Product Parameter

Bluetooth Version: BT 5.0
Sensitivity: 95dB±3dB
Frequency Response Range: 20Hz-20KHz
Operation Distance: About 10M
Input Voltage: DC 5V
Support Protocol: HSP / HFP / A2DP / AVRCP

Function Operation Introduction

IN Power On/Power Off Power On
1. Take out earphones from charging case for directly powering on;
2.At off status, long touch MFB button for 3 seconds.
Power Off:
1. Put earphones back to charging case for directly powering off;
2. At on status, long touch MFB button for 5 seconds.
Bluetooth Pairing

1. Take out two earphones from the charging case, the left and right earphones will power on and pair to each other automatically, then the master earphone flashes red or green light alternately, ready for pairing device.
2. Turn on Bluetooth on your cellphone, search the device name “TinyPods ENC” to click and pair, connect successfully when hear the prompt tone.
3. 1f earphones connected with cellphones before, earphones will connect to the cellphone automatically when earphones power on.
   Remarks:
   If those 2 earbuds will not pair with each other, please touch the MFB button until the red and green indicator light flashes alternately, then double-touch BOTH earbuds’ MFB buttons at the same time.

Clear Pairing Record
At TWS pairing status, quadruple touch the MFB button on either earphone to clear pairing information, earphones power off after clearing the record.
Low Battery Warning
At earphones on status, when battery voltage is lower than 3.3V, red light flashes every 30S, it proves low battery.
Earphone Charging
When earphones charge, the LED indicators solid red light; After the earphones are fully charged, the red lights turn off.
Charging Case Charging
When charging case charging, corresponding green light flashes; When fully charged, the green lights turn off. Notice: Charging Case Charging and Battery Indicator: 1 light 25%, 2 lights 50%, 3 lights 75%, 4 lights 100%

SAFETY PRECAUTION

• Do not detach or modify the earphone, otherwise, it might get damaged or malfunction. Defectives under this category are not included in the warranty.
• Do not expose the device to water or other liquid, otherwise, it might get damaged or malfunction. Defectives caused by liquid inside are not included in the warranty.
• Do not expose the earphone in extreme humidity or extreme temperatures (below 0 t or above 45°C ).
• Avoid putting the indicator light near children’s eyes or animal eyes.
• Do not use the earphone in thunderstorm weather which might cause malfunction and increase the risk of electric shock.

WARRANTY SERVICE AND DESCRIPTION
The date of purchase is subject to the purchase invoice, and if the valid invoice cannot be provided, the date of manufacture shall prevail. Quality issues do not include the user’s subjective judgment on sound quality. The warranty does not include plastic, manual, and packaging. For those models that have been stopped for production, the company warrants for repairing the functions only. Our company does not take any responsibility for the commitments dealers made to you but not within our company commitments.

Manufacturer: Shenzhen Sande Dacom Electronics Co., Ltd Add: Building I, NO.10, East of Shangxue Science & Technology Industrial Park, Bantian, Longgang, Shenzhen, China

NOTE: This equipment has been tested and found to comply with the brats for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, I not installed and used in accordance with the instructions, Trey cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by bringing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving anemia.
– Increase the separation between the equipment and receiver.
-Connect the equipment Into an outlet on a circuit different from that to which the receiver Is corrected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or moddrabcPs not expressly approved by the party responsible,* for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation 6 is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>