Dacom G84 BoneBuds Bone Conduction Earbuds User Manual

Dacom G84 BoneBuds Bone Conduction Earbuds

Touch Button FunctionAccessories

Product Parameter

• Bluetooth Version: BT 5.0
• Sensitivity
• 98dB+3dB
• Frequency Response Range: 20Hz-20KHz
• Effective Distance: about 10m
• Rated Voltage: DC 5v
• Supported Agreement: HSP / HFP /A2DP /AVRCP

Warming Tips
As picture 1 shows, take off the insulating film from the charging contact point for the first using,we suggest charging the earbuds at least 30mins before use them.

• take off the insulating film from the charging contact point for the first Using

Ear wing assembly guide

1. As picture 2 shows, match the A and B sgroove point of the ear wing to the A and B’ sbayonet coupling of earhook,then they are assembled successfully.The assembly method is the same on the left and right.
2. There is an extra pair of ear wing.you can choose your comfortable Wearing mode.

Operating instructions

Turn on/turn off
Turn on: 1.Take the headphone out off the charging case and the headphone will turn on automatically. 2.Press and hold the MFB button for 3 seconds to turn it on under the powered off state. Turn off:1.The headphone will turn off automatically and start charging when it being placed back in the charging case. 2.Press and hold the MFB button for 5 seconds to turn it off under the powered on state.
Bluetooth Pairing

1. Take 2 earbuds out of the charging case, the left and right earbuds will power on and pair with each other automatically,the indicator light will flash red and green alternately then go into pairing state.
2. Turn on the bluetooth from the mobile phone, search for the pair name bonebuds” on the phone and click to pair it. When hearing the tone, the earbuds are connected with the mobile phone successfully.
3. If the earbuds were connected with mobile phone betore, the earbuds will connect with mobile phone automatically while turn on earbus.

Remarks:
If those 2 earbuds will not pair with each other, please touch the MFB button until the red and green indicator light flashes alternately, then double-touch BOTH earbuds’ MFB buttons at the same time.

Operating instructions

Left earphone

• Click the MFB Button
  Answer The Call/Reject The Call/Play/Pause

• Double-Click The MFB Button
  Previous Song/TWS Pairing State/Language Switch

• Long Press
  Reject The Call/Voice Assistant(SIRI)

right earphone

• Click the MFB Button
  Answer The Call/Reject The Call/Play/Pause

• Double-Click The MFB Button
  Next Song/TWS Pairing State/Language Switch

• Long Press
  Right earphone Reject The Call/Voice Assistant(siRi

Clear Pairing Information
When the TWS is under pairing state, triple-press one of earbuds s MFB button ,and the paired information is cleared.
Forced Reset
When the earbuds turn on/off,press and hold the MFB button for 8 seconds in charging state,the earbuds will be reseted.

Operating instructions

• Turn On/Off The Flash Light
  When the tws is under connection state,press the one of earbuds’ s MFB button 4 times to turn on/off the flash light.The left and right earbud are synchronously.
  NOTE: The flash light does not work when using only one of the eabuds.

• Earbuds Charging
  The red light is always on while charging.and the red light will be off after full charging.

• charging Case Charging
  The green light will flash when the charging case is under charging.and the green light will turn off after full charging. Please  note:The charging case charging and battery indicates: One Grid 25% Two Grids 50% Three Grids 75% Four Grids 100% Wireless bone conduction motion headphones model:BoneBuds/G84 with FCC ID:2ATQU-BONEBUDs

FCC STATEMENT

NOTE: This equipment has been tested and tound to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance With the instructions, may cause harmful interterence to radio communications. HOwever, there is no guarantee that interfterence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more ot the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• connect the equipment into an outlet on a circuit difterent trom that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>