Dacom TinyPods ENC Noise Cancellation Earphones User Manual

TinyPods ENC Manual
FCC ID: 2ATQU-TINYPODSENC

Function of Button

Accessories List

Product Parameter

Bluetooth Version: BT 5.0
Sensitivity: 95dB:ndB
Frequency Response Range: 20Hz-20KHz
Operation Distance: About 10M
Input Voltage: DC 5V
Support Protocol: HSP / REP / A2DP / AVRCP

Function Operation Introduction

• Power On/Power
  Off Power On:
  1. Take out earphones from charging case for directly powering on;
  2. At off status, long touch MFB button for 3 seconds.
  Power Off:
  1. Put earphones back to charging case for directly powering off;
  2. At on status, long touch MFB button for 5 seconds.

• Bluetooth Pairing
  1. Take out two earphones from the charging case, left and right earphones will power on and pair to each other automatically, then the master earphone flashes red or green light alternately, ready for pairing device.
  2. Tum on Bluetooth on a cellphone, search the device name “TinyPods ENC” to click and pair, connected successfully when hear the prompt tone.
  3. If earphones are connected with a cellphone before, earphones will connect to the cellphone automatically when earphones power on.

Remarks:
If those 2 earbuds will not pair with each other, please touch the MFB button until the red and green indicator light flashes alternately, then double-touch BOTH earbuds’ MFB buttons at the same time.

Function Operation Introduction

• Clear Pairing Record
  At TWS pairing status, quadruple touch the MFB button on either earphone to clear pairing information, earphones power off after clearing the record.

• Low Battery Warning
  At earphones on status, when battery voltage is lower than 3.3V, red light flashes every 30S, it proves low battery.

• Earphone Charging
  When earphones charging, the LED indicators solid red light; After the earphones are fully charged, the red lights turn off.

• Charging Case Charging
  When charging case charging, corresponding green light flashes; When fully charged, the green lights turn off. Notice: Charging Case Charging and Battery Indicator:
  1 light 25%, 2 lights 50%, 3 lights 75%, 4 lights 100%

SAFETY PRECAUTION

• Do not detach or modify the earphone, otherwise, it might get damaged or malfunctioned. Defectives under this category are not included for warranty.
• Do not expose the device into water or other liquid, otherwise, it might get damaged or malfunction. Defectives caused by liquid inside are not included for warranty.
• Do not expose the earphone in extreme humidity or extreme temperatures (below 0 °C or above 45°C ).
• Avoid putting the indicator light near children’s eyes or animal eyes.
• Do not use the earphone in thunderstorm weather which might cause malfunction and increase the risk of electric shock.

WARRANTY SERVICE AND DESCRIPTION
The date of purchase is subject to the purchase invoice, and if the valid invoice cannot be provided, the date of manufacture shall prevail. Quality issues do not include user’ s subjective judgment on sound quality.
The warranty does not include plastic, manual, and packaging. For those models that have been stopped for production, the company warrants for repairing the functions only. Our company does not take any responsibility for the commitments dealers made to you but not within our company commitments.

WARRANTY CARD

Dealer information| Item|
---|---|---
Dealer name|
Product series number|
Telephone number|
Date of sales|
User information| User address|
Contact address|
E-mail|
Remark

Manufacturer: Shenzhen Sande Dacom Electronics Co.,Ltd Add: Building I, NO.10, East of Shangxue Science & Technology Industrial Park, Bantian, Longgang, Shenzhen, China

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>