Dacom G91 TinyPods ENC True Wireless Stereo Headphones User Guide

TinyPods ENC
Manual

Function of Button

Accessories List

Earphone pair Charging Cable1 Charging Casel Earcap2 pairs User Manual

Product Parameter

Bluetooth Version: BT 5.0
Sensitivity: 95dB±3dB
Frequency Response Range: 20Hz-20KHz
Operation Distance: About 10M
Input Voltage: DC 5V
Support Protocol: HSP / HFP / A2DP / AVRCP

Function Operation Introduction

Power On/Power Off Long touch MFB button for 3 seconds to power on, long touch MFB button for 5 seconds to power off. Answer/End the Call: Single tap left or right earbud Play/Pause: Single tap left or right earbud Reject the Call: Long touch left or right earbud for 2 seconds Language Switch: At TWS paired status, triple tap the MFB button on either earbud Voice Assistant: At TWS connection status, long touch left earbud for 2 seconds Low Latency Mode: At TWS connection status, long touch right earbud for 3 seconds Previous/Next song: Triple tap left earbud for previous song, triple tap right earbud for next song Volume +/-: Double tap the left earbud to decrease the volume, double tap the right earbud to increase the volume
Function Operation Introduction
Power On:

1. Opening the charging case, the earphone is automatically powered on; 2. At off status, long-touch the MFB button for 3 seconds, the green light stays on for 1 second, and the earphones are powered on. Power Off:
2. Put the earphones back into the charging case, close the cover, and the earphone is powered off and enters the charging state;
3. At power on status, long touch the MFB button for 5 seconds, the red light stays on for 2 seconds, and the earphones is powered off

Bluetooth Pairing

1. The earphone is in the charging case, open the cover of the charging case, the earphone is automatically powered on, the green light flashes, and the two earbuds will automatically pair after powering on. After the pairing is completed, the master earphone flashes red and green alternately and enters the pairing state
2. Tum on Bluetooth on a cellphone, search the device name “TinyPods ENC” to click and pair, and the earphone is successfully connected to the cellphone after hearing the prompt tone.
3. If earphones are connected to a cellphone before, earphones will power on and connect to the cellphone automatically when the charging case is opened.

Function Operation Introduction
Remarks:
If those 2 earbuds will not team up with each other, please touch the MFB button until the red and green light alternate flashing state, then double touch the MFB button of the two earbuds at the same time.
Clear Pairing Record
At TWS pairing status, quadruple touch the MFB button on either earphone to clear pairing information, earphones power off after clearing the record.
Low Latency Mode
At TWS connection status, long-touch the MFB button on the right earbud for 3 seconds in low latency mode can be turned on or off. Warm reminder:

1. Low-latency mode can only be turned on in two earbuds mode, and cannot be operated in single earbud mode
2. After the two earbuds are powered off, they will automatically exit the low-latency mode.

Voice Assistant

1. At TWS connection status, a long touch of the MFB button on the left earbud for 2 seconds can wake up the voice assistant (or Siri).
2. When using a single earbud, long-touch the MFB button for 2 seconds also can wake up the voice assistant (or Sin).
   Note: The voice assistant needs device support, and the voice assistant permission must be turned on on the device side.

Function Operation Introduction
Earphone Charging
The red light is always on when the earphone is charging, and the red light is off when it is fully charged.
Charging Case Charging
When the case is being charged, the light will be flashing green; after fully charged, the lights will turn solid green.
Note: Charging and power indicator of charging case :1 LED: 25%, 2 LEDs: 50%, 3 LEDs: 75%, 4 LEDs: 100%
Warm reminder:
If you purchase pink earphones, the flashing mode of the headset is as follows

SAFETY PRECAUTION

• Do not detach or modify the earphone, otherwise, it might get damaged or malfunction. Defectives under this category are not included in the warranty.
• Do not expose the device to water or other liquid, otherwise, it might get damaged or malfunction. Defectives caused by liquid inside is not included in the warranty.
• Do not expose the earphone to extreme humidity or extreme temperatures (below 0 °C or above 45°C ).
• Avoid putting the indicator light near children’s eyes or animal eyes.
• Do not use the earphone in thunderstorm weather which might cause malfunction and increase the risk of electric shock

WARRANTY SERVICE AND DESCRIPTION
The date of purchase is subject to the purchase invoice, and if the valid invoice cannot be provided, the date of manufacture shall prevail. Quality issues do not include the user’s subjective judgment of sound quality.
The warranty does not include plastic, manual, or packaging. For those models that have been stopped from production, the company warrants repairing the functions only.
Our company does not take any responsibility for the commitments dealers made to you but not within our company commitments.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>