Kinghat 2AX4UQ1 Wireless Microphone Instructions

Kinghat 2AX4UQ1 Wireless Microphone

Specifications:

• Product: Wireless Microphone
• Usage: Professional-grade recording output for online live broadcasting, video VLOG shooting, program interviews, interview recordings, video teaching, etc.
• Components: Microphone transmitter and receiver
• Power: Plug and play, no APP required
• Compatibility: Works with most mobile phones, some brands may require OTG settings adjustment
• Charging: Type-C interface for charging
• Weight and Size: 100g, 65x70mm

Product Usage Instructions

Instructions for Use (Transmitter):

1. Press and hold Power button for 2 seconds to turn on the transmitter. The red and green indicators will flash alternately.
2. The transmitter is now waiting for connection. You can hear your own voice through the monitor earphones.
3. Press and hold Power button for 2 seconds to turn off the transmitter. The indicator will be completely off after powering off.

Instructions for Use (Receiver):

1. Plug the receiver into the device. The indicator will flash initially.
2. Once successfully connected with the transmitter, the  indicator stays on.

Charging:

1. Connect one end of the receiver to the mobile phone interface for charging.

Note: Some mobile phone brands like OPPO/VIVO/IQOO/Realme may require OTG settings adjustment for normal usage.

FAQ

• Q: How do I know when the microphone is fully charged?
  • A: During charging, the red indicator stays on. It turns off after full charging. On the receiver, the white indicator flashes during charging, and 4 white indicators stay on when fully charged.
• Q: What should I do if my mobile phone brand is not mentioned in the compatibility list?
  • A: If your mobile phone brand is not explicitly mentioned, you can still try using the microphone. If you face issues, check the OTG settings in your phone’s settings.
• Q: Can I use the microphone without the receiver?
  • A: No, the microphone needs to be connected to the receiver for proper functioning and recording.

Product introduction

Thank you for choosing our products. This product is a smart wireless microphone that can provide professional-grade recording output. Plug and play, no APP required. It can be used in online live broadcasting, video VLOG shooting, program interviews, interview recordings, video teaching and other occasions. This product consists of a microphone transmitter and receiver. (As shown in the photo below, some models do not have a charging compartment, subject to the actual product)

Instructions

Instructions for use (transmitter)

Press and hold Power for 2s, and the red and green indicators will flash alternately, indicating that the power has been turned on successfully, and the transmitter is waiting for connection, meanwhile,from the monitor earphones we can hear our own voice. Press and hold Power for 2s to turn off the transmitter, and the indicator will be completely off after powering off.

Instructions for use (receiver)

When the receiver is plugged into the device, the indicator flashes, and when it is successfully connected with the transmitter, the indicator stays on.

ID icon

Use method

Connect one end of the receiver to the mobile phone interface

Note: OPPO/VIVO/IQOO/Realme and other brands of mobile phones need to go to the settings (Search for “OTG” – turn on OTG power supply) to use it normally.

Function UI

Transmitter

Power on

| Press and hold Power for 2s| The red and green indicators flash

alternately

|
Power off| Press and hold Power for 2s| The indicator turns off|
Mute| Click to mute| The green indicator flashes|
Reverb| Double click to enter orexit reverb| The blue indicator stays on|
Successfully

connect to the receiver

| Automatically match| The green indicator stays on|
Disconnect from the receiver|  | The red and green indicators flash alternately|

Charging

|  | The red indicator stays on during charging and it turns off after full charging|
Low battery|  | The red indicator flashes|

Receiver

Charging compartment

Full charging

|  | 4 white indicators stay on, and the red indicator of the transmitter turns off|

FCC Statement

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>