Dacom Gemini G100 Bone Conduction and Dynamic Drivers 2-in-1 Sport Bluetooth Headset User Manual
- June 6, 2024
- Dacom
Table of Contents
Gemini G100 Bone Conduction and Dynamic Drivers 2-in-1 Sport
Bluetooth Headset
User Manual
Button Function
Accessories
Product Information
Earphone Model: Gemini G100
Bluetooth Version : V5.0
Driver: Bone Conduction&Dynamic Drivers
Frequency response range: 20Hz-20KHz
Effective distance: about 10 meters
Battery Type: Rechargeable Lithium-ion Polymer Battery
External voltage: DC4.8V-5.5V Support Agreement: HSP / HFP / A2DP / AVRCP
Wear Introduction
Replace Bone Conduction Head/Dynamic Driver Head
- Select bone conduction or dynamic headphone by different scenarios (do not mix and match)
- Put L and R head-on headphone fuselage respectively(show as the above image) remind 1. replace headset when turn off status, When replacing the heads of the earphone, please must pull and plug vertically, do not rotate them.
BASIC SKILLS
Power On
Long press MFB button for 3S, the green indicator blinks once, the headphone
power on.
Power Off
- Long press the MFB button for 4S, the red indicator goes on for 2S, the headphone power off.
- The headphone will power off automatically after 5-min stand by, the red indicator goes on for 2S.
Bluetooth Connection Long press the MFB button for 5S power on your headphone. When the light flashes red and green, turn on the Bluetooth and click “GEMINI G100”, it’s connected successfully when you hear “connected”.
Previous/Next Song
Previous Song: Triple-click MFB button to previous song Next Song: Double-
click MFB button to next song.
Volume Control
Double-click when listening to music or making a phone call volume+; Triple-
click when listening to music or making a phone call volume-.
Play / Pause
Click the MFB button to Play/Pause when listening to music.
Answer the Call
Click the MFB button to answer the call.
Hang Up the Call
Double-click the MFB button to hang up the call.
Reject the call
Long press the MFB button for 2S to reject the call.
Night-Running LED
Click the MFB button four 4 times to turn on/off the night-running LED when
headphones power on.
Sport / Standard Mode
Long press for 3S to switch sport/standard mode when listening to music.
Switch Language
Double-click the MFB button to switch language before Bluetooth connection.
Voice Assistant
Long press the MFB button for 25 to turn on the voice assistant.
Note: The voice assistant needs to be supported and enabled by the
device.
Reset
Long press the MFB button for 5S to clear connection information when
charging. Full charging The red indicator keeps on when charging, The green
indicator keeps on when full charging.
SAFETY PRECAUTION
- Do not detach or modify the earphone, otherwise, it might get damaged or malfunction. Defectives under this category are not included in the warranty.
- Do not expose the device to water or other liquid, otherwise, it might get damaged or malfunction. Defectives caused by liquid inside is not included in the warranty.
- Do not expose the earphone in extreme humidity or extreme temperatures (below 0 °C or above 45°C ).
- Avoid putting the indicator light near children’s eyes or animal eyes.
- Do not use the earphone in thunderstorm weather which might cause malfunction and increase the risk of electric shock.
WARRANTY SERVICE AND DESCRIPTION
The date of purchase is subject to the purchase invoice, and if the valid
invoice cannot be provided, the date of manufacture shall prevail. Quality
issues do not include the user’s subjective judgment on sound quality.
The warranty does not include plastic, manual, or packaging. For those models
that have been stopped for production, the company warrants repairing the
functions only.
Our company does not take any responsibility for the commitments dealers made
to you but not within our company commitments.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.