Dacom 2017 S041 TWS Earbuds User Manual
- June 4, 2024
- Dacom
Table of Contents
2017 S041 TWS Earbuds
User Manual
Product Description
Bluetooth standard: V5.0
Battery Type: Rechargeable lithium polymer battery
Rated Voltage:3.7V
External Voltage: DC4.8-S.SV
Support protocol:Headset / Handsfree/ A2DP /AVRCP
Accessories: Micro USB charging cable, User manual
■ This product can accept audio files from any Bluetooth device like Bluetooth
mobile phones. Bluetooth notebooks.
■ When connect to Bluetooth DONGLE on a PC, it can play any audio files on the
computer.
Product Schematic
Features
Power On : long press the button of MF8 for 3 seconds until the blue
light flashes 3 times, and the device will be on.
Pairing Method: Long press the button of MFB for 5 seconds while in the
power-off status, the blue and red light will flash in turn showing the paring
status.
Power Off: Long press the button of MFB for 4 seconds while in the power-
on status, the red light will flash for about 1 second and go off to show that
the device has been off.
Call hang up: short press the button of MFB while in talking or calling
status the Last number redial double click the button of MFB while in standby
and music playing status Call answer: short press the button of MFB Call
reject: long press MFB button for 2 seconds
The pairing finished : (the earphone paired to mobile before) Turn the
earphone on, please search and press the button the model name of the earphone
on your mobile, there will be a voice prompt reminds you that the connection
has been finished, and then the blue light will be auto turn oft
Pairing canceled statist (the earphone and mobile not connected), tum off
the Bluetooth function on mobile or beyond the range of connection the blue
light will flash 1 time 10 seconds.
Automatic connection: within the range of connection, the mobile will
automatically connect to the Bluetooth device which has been paired before
while on status short press the button of MFB on the main device to connect
the mobile which has been paired before while standby status but without
connection away from the device while talking calling/incoming call standby
mode/ listening music and back to the range of connection within 3 min, will
automatically connect to your mobile.
Answer the second call and hang up the first call: click the MF8 button
for time to answer an incoming call while calling.
Answer the second cal and remain the first call: double click the MFB
button to answer the incoming call while in calling status, switchover between
two calls is also workable.
Low-battery warning: voice prompt to remind the low battery while the
power of the battery is lower than 3.3V.
Low-battery and turn-off: the earphone will automatically turn off when
the voltage of the battery is lower than 3V while on status.
Charging:
- Put set in the station, will charge automatically, also reset while charging, red light on,
- Station connecting 5V power, station red light on.
Charged:
- Blue light off after light on SO seconds;
- The red light of the station is off .
Play/pause: short press the MF8 button while standby or music playing
status.
Reset function: double click the MFB button to clean all pairing info
while standby status(without connection), the earphone is turned off.
Power display on 105 system: connect to the Bluetooth headset with your
apple mobile, there will have a power display beside the mark of Bluetooth on
the mobile notification bar.
Switching Language: switch prompt language between Chinese and English.
just double-click the MFB button when a device is connected.
Discharge the base : Press the BTN button for 1 second to charge the
headphones in the base. (Note: A has this feature, and 8 does not)
Powered off: Press the BTN button for 3 seconds. Headphones in the base
do not charge. (Note: A has this feature, and B does not)
Steps of Bluetooth pairing-first pairing
- keep the Bluetooth headset and your phone within 1 meter when pairing.
- long press the MFB button until the red and blue indicators flash alternately when power is off..
- Set the phone to search for Bluetooth device.
- When the phone is headset select”Bluetooth w from the list
- Enter pin code ‘0000″ when prompted by the phone.
- Repeat the above steps if the pairing failed.
- The blue light will be tum off when the pairing is done.
LED-operation indication:
Station Charging: Middle red light on
Station Charged: Middle red light off
Station not charging: Middle red light off
Headphone charging: red light on
Headphone charged: blue light on SO seconds then off
WARRANTY CARD
Dealer Information| Item|
---|---|---
Dealer name|
Product series number|
Telephone number|
Date of sales|
User information| User address|
Contact address|
E-mail|
Remark
The Headphone has one-year free warranty service from the date of purchase, for any deliberate damage should charge a warranty fee