kogan ESIONFCSTMA Estelle Nano Ionic Face Steamer Humidifier User Guide

estelle
USER GUIDE NANO IONIC FACE
STEAMER HUMIDIFIER
ESIONFCSTMA

SAFETY & WARNINGS

• Read all of the following instructions before use. Keep this user guide for future reference.

• There may be residual water in the device’s tank when you open the package. That is the residual water from the device testing. It will not lead to many health problems.

• When new, this device will have some plastic smell. To reduce the plastic smell, it is recommended to run the device with 40mL of water and a few drops of vinegar prior to
  first use. Ensure the vinegar water is completely depleted (no more steam coming out from the device) before turning off and cooling down the device.

• Do not use this device near bathtubs, sinks, or in areas where exposure to moisture is likely.

• Do not use this device if you are sensitive to heat. It may result in burns or scalds.

• The device must not be used by:
  o People during pregnancy or while menstruating, as it may cause skin problems due to hormone imbalance.
  o People who have allergies, skin diseases, dermatitis, skin allergies, or severe sunburn.
  o People with skin problems, like eczema or swelling.
  o People who are recovering after surgery.

• Do not touch any metal parts of the power plug when the power supply is turned on.

• When not in use, turn off the power supply and unplug the power plug, otherwise, it may cause a fire.

• Use only with the supplied 300W power adapter.

• Ensure that the plug is fully inserted into the power socket while using this device, otherwise, it may cause electric shock.

• Do not pull or insert the plug with wet hands, otherwise, it may cause electric shock or may lead to a short circuit.

• Do not use or store the device in a bathroom or in a wet room, as this may result in electric shock or short circuits.

• Do not allow children to use this device as it may cause burns, electric shock.

• Do not use this device near flammable materials (e.g. alcohol, petrol, nail polish, remover, spray, etc.), otherwise, it may cause a fire.

• Use only distilled water or purified water, otherwise, it may lead to devise failure or even burns.

• Do not touch the steam when operating the power switch. Keep your face and hands at least 20cm from the nozzle.

• During use or within 10 minutes after use, do not tilt, shake, or move the device.
  Otherwise, the hot water may leak, or a lot of steam would come out from the steam outlet.

• After using this device, let the water completely cool down, then pour out the remaining water. Ensure to hold the device while pouring out the water.

• Ensure to drain out the water. Clean the water droplets on the steam outlet. Otherwise, hot water might spill out when the power supply is turned on for the next use.

• Put this device on a flat surface while using it, do not hold it in your hand.

• Do not move the device during use or within 10 minutes after use, as there will still be steam release after the power is turned off. Do not go near the steam outlet

• Ensure to use distilled water or purified water. Using different water quality may shorten the service time of the device.

• Tap water, mineral water, hydrothermal acid water, alkaline water contains high mineral content and should not be used.

• Do not mix any other substances in the water, such as laundry liquid, aromatic oil, and so on. It may cause burns, malfunctions or shorten the service time of the device

skin Care Tips

• Do not overuse. Excessive use will make the skin pores open too much.
• Do not use it more than 2 times a day. Each time, not more than 10 minutes. For normal skin, use it 3-5 times a week. For sensitive skin, use once a week.
• Cease use immediately if you experience any pain or abnormalities on your skin.

Before First Use:
When new, this device will have some plastic smell. To reduce the plastic smell, it is recommended to run the device with 40mL of water and a few drops of vinegar prior to first use. Ensure the vinegar water is completely depleted (no more steam coming out from the device) before turning off and cooling down the device.

OVERVIEW

ASSEMBLY

1.  Place the device on a flat and sturdy surface.

2. Use the measuring cup to add water to the tank. Do not exceed the maximum water level.
   

3. Align the spray head to the spot on the device as shown in the image. Twist 90° clockwise, to lock it into the device’s tank.
   

OPERATION

Using the Device

1. Plug the power cord into a power outlet. Turn on the power supply. Press the power button.

2. The steaming will start after 20 seconds. When steaming, the water droplets may spill out. This may be caused by adding too much water. Ensure to use the measuring cup to add water. Do not exceed the marked ‘MAX’ water level line (50mL).
   Note: To reduce the risk of burns, it is recommended to use 40-45mL of water peruse. Exceeding the maximum capacity may cause water to splash and create a risk of burning.

3. To ensure the steam covers the entire face, keep the face 20 cm (or more) away from the nozzle edge.

4. When the amount of water is insufficient, the steam will be weakened. When the water in the tank is completely used, the releasing of steam will stop. Average use time is 8-10 minutes, to empty all water.

5. If you want to continue using the device, then turn it off, wait for 10 minutes before you to use the device again. Follow the instructions in this section.

6. After steaming, turn off the device and the power supply. Store it after it cools down completely. Moisturise your face skin, otherwise your face may feel dry.

Operation Advice

• Recommended steaming session length is 8-10 min of continuous use, which is equivalent to approximately 45mL of water. This will ensure the water tank is completely emptied and ready for next use.
• After each use, ensure all excess water is emptied. Failure to do so may cause:
  • Bacteria developing in residual water, unhygienic for future use
  • Accidentally overfilling water tank for future use

CLEANING & CARE

• Ensure all excess water in the tank is removed.
• Cool the device for at least 10 minutes after use.
• Disconnect from the power supply. Drain the remaining water in the tank. Wipewater on the surface of the device.
• To drain remaining water, twist to remove the spray head from the device’s bodHold the device to drain the water.
• Clean the device once a month. Use a dry cloth to wipe off the dust, especiallythe power plug.
• Add water into the tank. Insert the spray head and gently shake the device 3 otimes. Do not tilt the device while shaking. Drain the water. Repeat this draininprocess for 2 or 3 times to clean the water tank.

SPECIFICATIONS

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product,as well as any additional assistance you may require,
head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>