VIISAN VF3240 A3 High Speed Flatbed Scanners User Guide

VIISAN VF3240 A3 High Speed Flatbed Scanners

Unpacking

1. Scanner
2. USB Cable
3. Power Adapter
4. Installation CD
5. Quick Start Guide
6. Warranty Card

Installing the Software

NOTE: Do NOT connect the scanner to the computer before installing the software. You must install the scanner driver first then connect the scanner to the computer.

1. Insert the Installation CD into the drive of the computer then execute [Setup.exe] from the disk.
   NOTE: For Windows 11/10/8.1/8/7 users, if the [User Account Control] screen appears, click [Yes] to start the installation.

2. Click [Easy Installation] and follow the instructions on the screen to complete installation. If you want to reinstall only specific software that you have previously uninstalled, select [Custom Installation] and specify the software. When the installation is completed, click [Finish] to exit the program.

NOTE: If your computer does not have a CD drive, please visit https://www.viisan.com/en/download/type2.html to download the standalone software.

Connecting the Scanner

1. Connect supplied Power Adapter to the scanner’s DC IN port, and plug the other end to a power outlet.
2. Connect supplied USB Cable to the scanner’s USB Port and the other end to the computer.
3. Press and hold [POWER] to turn on the scanner until the Power LED lights up in blue. To turn off the power, press and hold [POWER] for a while until the Power LED turns off.
   NOTE: Windows will automatically detect the scanner when the USB cable is connected and turned on power, please wait a while until Windows appears device driver software installed successfully message.

Place scan material

1. Open the scanner lid and place the original facing down on the flatbed glass.
2. Align the original at the position Arrow Mark and close the scanner lid.
   NOTE: If you are scanning books or other thick documents, you can lift the scanner lid straight up or remove it.

Scan by Using Event Utility

1. Click the Event Utility icon from the system tray to bring up the control panel. Or click the system Windows icon then [All apps] to select Event Utility program.
2. You can directly press a button from the Event Utility panel to start scanning to the destination.
3. Alternatively, you can press a button on the Scanner to start scanning to the destination.
4. To set the scan settings of Event Utility, click on the settings icon in the right top corner of control panel to bring up the settings menu.
   NOTE: For more detailed operation of Event Utility, you can refer to user’s manual from the supplied CD-ROM.

Scan by Using ViiScan Program

1. Click the system Windows icon then [All apps] select the [VIISAN] folder to open the “ViiScan” program.
2. Select VFxxxx Scanner from the select source list and click [OK] then the ViiScan interface will be opened immediately.
3. You can make changes in the settings as necessary and then click [Preview] to preview the image before scanning.
4. When the pre-scanned image appears, you can resize the scan area by dragging the marquee handles around the image to frame the desired area of the image. The area outside of the frame will be cropped after clicking the Scan button.
   NOTE: For the more detailed operation of “ViiScan”, you can refer to the user’s manual from the supplied CD-ROM.

References

• VIISAN Download A3 Flatbed Scanners

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>