kogan KAMN34RXUSA 34″ WQHD Curved Ultrawide Freesync HDR Gaming Monitor User Guide

June 7, 2024
Kogan

KAMN34RXUSA 34″ WQHD Curved Ultrawide Freesync HDR Gaming Monitor

34″ WQHD CURVED ULTRAWIDE FREESYNC HDR GAMING MONITOR
(21:9 144Hz 3440 x 1440)
KAMN34RXUSA

SAFETY & WARNINGS
  • Read all instructions before using the appliance and retain for reference.
  • Unplug the monitor before cleaning it.
  • Use a clean, slightly dampened cloth to wipe the main monitor body.
  • To clean the screen, turn it off unplug it and wait for it to cool completely, then wipe it with a dry micro-fibre cloth.
  • Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
  • This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
  • Do not insert any object or spray any liquid into the vents.
  • Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
  • Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
  • Unplug the monitor if it is not going to be used for an extended period.
  • Do not place heavy objects on the monitor, its power cord or any connected cable.
  • Do not open the back panel of the monitor, as it contains a high-voltage current
    even when not plugged in.

The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

COMPONENTS

monitorMonitorStand connector

cable guide

stand base

OVERVIEW

Monitor Controls

monitor control

The control stick functions as directional input and power/OK when pressed.

  1. Press and hold for 6 seconds to turn on and off.
  2. With the display turned on, press to wake up the main menu for one second.
  3. In the menu, press up and down to highlight an item and OK to confirm. Press OK again to save and return to the upper menu.
Monitor Ports

monitor parts

2 AUDIO OUT (3.5mm)
3 DP 1.4
4 DP 1.4
5 HDMI 2.0
6 USB
Note: The USB port is for firmware update installation only and does not provide the monitor or a connected device with USB connectivity.

STAND ASSEMBLY

WARNING: The panel of the monitor is fragile. Keep the foam underneath the monitor screen while assembling the stand.

  1. Carefully remove the monitor, stand connector and stand base from the box.

  2. Attach the stand base to the stand connector using the M6 screw provided.

  3. Insert the connection block into the back cabinet and push down until firmly connected. Open

  4. Lift monitor up straight and remove the bottom foam. Stand the monitor up on the installed base.
    lift monitor

VESA MOUNT

VESA mounting pattern 100 x 100mm, screw size M4.

Note: VESA mount and mounting accessories are NOT included.

  1. Open the box, take out the monitor with protection form attached and gently place
    it on a desktop or table. Remove the extra parts and the foam covering the back of the monitor. Press the release button to remove the stand plate. If the monitor was
    already attached to the stand, remove the stand.
    attached parts

  2. Assemble the mount as per the instructions provided with the mount.assemble mount

CONNECTIVITY

Power cable
Connect the included power cable to the monitor power port and then connect the other end to a power outlet.

Audio out (3.5mm)
Headphones, speakers or other audio devices can be connected to the 3.5mm output on the monitor. The monitor may need to be set as the PC’s default sound output device.
audio output

HDMI
For the monitor to receive HDMI signals from the computer, use the HDMI cable to connect the monitor to the computer.
HDMI output
DisplayPort
For the monitor to receive DisplayPort signals from the computer, use the DisplayPort cable to connect the monitor to the computer.

Note: The DisplayPort connector has a locking mechanism to prevent accidental disconnection. To remove, press down on the tab near the flat end of the connector.

OPERATION
  1. Connect the monitor to the input device via HDMI or DisplayPort.
  2. Connect the power cable to the monitor and then connect the other end directly to a power socket.
  3. Use the power button to turn the monitor on.
FreeSync
  • To use this feature, ensure your hardware has FreeSync capability and the graphics drivers are fully up to date.
  • After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu.
  • See your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.

The On-Screen Display (OSD) menu may be used to adjust your monitor’s settings and appears on the screen after turning on the monitor and pressing OK. When using the monitor for the first time, it will configure optimal settings automatically.

1. Press move the control stick to the right to activate the navigation window.

navigate window
2. Press OK to enter the OSD menu.

osd menu

3. Use the control stick to highlight the item to be adjusted in the main menu. After selecting the items, press OK to adjust. Press OK again to save and return to the upper menu.

Refer to the following pages for a detailed list of the OSD menu functions.

Menu

|

Sub-Menu

|

Options

|

Description

---|---|---|---

Picture

|

Brightness

|

~0-100

|

Adjust display brightness

Contrast

|

~0-100

|

Adjust display contrast

DCR

|

On

|

Turns dynamic contrast ratio on/off

Off

ECO

|

Standard/Photo/
Game/Movie/
FPS/RTS

|

Preset colour modes

Colour

|

Colour Temperature

|

Normal

|

Select colour temperature mode or  allow manual colour configuration  (USER)

Warm

Cool

USER

Red

|

~0-100

|

Adjust red value
(USER mode only)

Green

|

~0-100

|

Adjust green value
(USER mode only)

Blue

|

~0-100

|

Adjust blue value
(USER mode only)

OSD Setting

|

Language

|

English

|

Set OSD language

OSD H-Position

|

0~100

|

Adjust OSD horizontal position

OSD V-Position

|

0~100

|

Adjust OSD vertical position

OSD Transparency

|

0~100

|

Set OSD overall transparency

OSD Time Out

|

0-100

|

Set how long the OSD remains open  after last input

Setup

|

Input Source

|

DP1/DP2/HDMI1

|

Select video input source

---|---|---|---

Mute

|

on

|

Enable or disable monitor speaker output

off

Volume

|

0-100

|

Adjust monitor speaker volume

Audio Source

|

DP1/DP2/HDMI

|

Select sound input source

Reset

|

N/A

|

Restore all settings to factory default

Firmware Update

|

Update

|

Update monitor firmware via USB  flash drive

Other

|

Aspect Ratio

|

Wide Screen

|

Select the display’s aspect ratio

4:3

1:1

Auto

Low blue Light

|

Off

|

Blue light reduction adjustment

Low

Medium

High

Max. High

Response Time

|

On

|

Enable or disable overdrive
for faster response time

Off

FreeSync

|

On

|

Enable or disable FreeSync

Off

HDR

|

On

|

Enable or disable HDR

Off

LED Mode

|

On

|

Enable or disable back LED control

Off

Multi Window

|

Multi-Window

|

OFF

|

Select multi-window mode

---|---|---|---

PiP Mode

PBP 2Win

PBP 3Win

Sub Win2 Input

|

DP1

|

Select source to be displayed in  the second window

DP2

HDMI

Sub Win3 Input

|

DP1

|

Select source to be displayed in  the third window

DP2

HDMI

PiP Size

|

Small

|

Change the size of the sub window  in PIP mode

Medium

Large

PiP Position

|

TopRight

|

Change the position of the sub  window in PIP mode

TopLeft

BottomRight

BottomLelt

Swap

|

Main Window

|

Swap between the main and sub window

ECO MODES & GAMEPLUS SWITCHING
  1. Move the control stick down to switch Gameplus modes. These overlay icons are primarily designed to assist aim during FPS games, though they can be used for other scenarios.
    Game Cursor
    game cursor

  2. Move the control stick left to switch ECO modes. These modes include Standard, Text, Movie, Game, FPS and RTS and can be used to optimise settings according to your activity. Standard mode is suitable for most activities.
    eco mode

SPECIFICATIONS

Screen size 34”
Aspect ratio 21:9
Brightness 300cd/m² (typical)
Panel VA
Resolution 3440 x 1440
Refresh rate 144Hz
Response time 7ms with Overdrive enabled (14ms typical)
Viewing angle ≥178°(H) / 178°(V)
Contrast ratio 3000:1
VESA mounting 100 x 100mm
Colours 16.7M
Signal input HDMI 2.0 DP1 1.4 DP 2 1.4
Power AC 100-240V ~50/60Hz 1.1A
Audio
Speakers YES
Audio out YES
Accessories
Power cable YES
DisplayPort Cable YES
Additional functions
Low Blue Light YES
Flicker Free YES
Physical dimensions
Dimensions (w. Stand) 807.5 x 463.4 x 249.2mm (mm)
Dimensions (w/o Stand) 807.5 x 364.0 x 130.2mm (mm)
Net weight 7.65kg
Gross weight 10.5kg

NOTES

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require,
head online to help.kogan.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals