ZYXEL NWA1123-ACv3 NebulaFlex/Standalone Wireless Access Point User Guide
- June 7, 2024
- ZYXEL
Table of Contents
NWA1123ACv3
802.11ac Wave 2 Dual-Radio
– Ceiling Mount PoE Access Point
Quick Start Guide
Hardware Installation
Connect the UPLINK port to a router with Internet access. If you are not using PoE, connect the NWA1123ACy3 power socket to an appropriate power source.
Option A
Cloud Management
Option 1: Vse MAC address and serial number to add a device in the NCC
Follow the steps below to manage the NWA1123ACv3 through the Zyxel cloud-based
network management system.
Note: Make sure the connected router has Internet access.
(1) Go to the Zyxel Nebula Control Center (NCC) website
(https://nebula.zyxelcom). Click Get Started to sign up for my Zyxel
account and log in.
(2) Create on organization and o site (i in the NCC.
(3) Enter the NWA1123ACY3’s LAN MAC address and serial number (S/61) (see the
label on the device) in the NCC configuration screen. Note: The NWA1123ACy3
will go into cloud management mode automatically and restart after it is
registered to the site. See the NCC User’s Guide for more information about
configuring the NWA1I23ACv3 through the NCC.
Option 2: Use Zoe! Nebula Mobile app to add o device in the NCC
Where to find QR
code:
Web Configurator or Label on the device
Download and open the Zyxel Nebula Mobile app. Log in with your Zyxel
account.
Creole an organization and site or select an existing site. Scan the
NWA1123ACv3’S QR code to add It to the site. (You con find the QR code In its
web configurator or on a label on the device or its box.)
Note: The NWA1123ACy3 will go into cloud management mode automatically
and restart after it is registered to the site.
Option B
Standalone Management
WiFi connection
http://1.11.1 (First-time-configuration only)
(1) a From a WiFi-enabled computer. search for the NWA1I23ACY3’s default
lAriFi network name (Zyxel-XXXX, where XXXX is the last four characters of the
MAC address) and connect to it
Open your web browser and enter ihttplitl. tr for initial configuration. Enter
the default user name (admin) and password (1234). Click Login. login/Reset
instructions
Note: If the NwA1123ACv3oannot connect to the Internet. use the MCP-
assigned P address of the NwA11234Cv3 to access its web configurator. Check
the connected router or DHCP server for the IP address of the NWA1123A0.1.
1-b Wired connection
http://192168.12
1-b Use an Ethernet cable to connect your computer to the UPLINK port of the NWA1123ACy3 through a PoE injector or PoE switch. Use its Di ICP- assigned IP or default static IP address “http://192.168.12” to access the web configurator. Make sure your computer IP address is in the same subnet as the NWA1123ACv3s.
(2) The wizard appears automatically. Use the wizard to set up your
NWA1123A0/3.
Note: It takes 1 to 2 minutes to apply your wizard changes. The power LED
will blink red and green altemothrely. The power and WIFI LEDs then turn
steady green when the system is ready. Check the Dashboard screen and note
down the NWA1t23ACV3Is address In case you need to access Its web configurator
again.
Note: 1.1.1.1 Is for Initial setup only. It Is not usable otter the
NWA1123ACv3 Is configured
(3)Use the NWA1123ACy3’s new wireless settings (SSID and key) to re-connect to
the NWA1123ACy3’s WiFi network for Internet access if you change them in the
wizard.
Wall / Ceiling Mounting
1-a Wall mounting: Drill two holes for the screw anchors (A), 624 mm
apart. Insert the screw anchors into the wall. C)
1-b Coiling mounting: Drill two holes for the screw anchors (A), 62.4 mm
or 70.1 mm apart. Insert the screw anchors into the ceiling.
(2) Install two mounting screws through the holes on the bracket (B) into the
plugs/anchors to secure the bracket to the wool ceiling. Make sure the screws
are snugly and securely fastened to the will Ceiling.
(3)After the bracket is attached to the wall ceiling, slide the NWA1123ACv3
onto the bracket until it clicks into place.
T-bar Ceiling Mounting
- attach two Clips to the ceiling grids as shown.
- Install two screws to secure the bracket to the clips.
- Slide the NWA1123ACy3 onto the bracket until It clicks into the place.
Note: Clips (ACCESSORY-220106F) are sold separately.
Support Information
North America
+1800 255 4101 eaaoLtezyzarsa
support@zyxel.com
EU
https://supprt.zyxel.eu
See the User’s Guide atwww.zyxel.com for more
information, including customer support and safety warnings.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378 2 th. 2860 Satara, Denmark
https://www.zyxel.com/dk/da/
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001 https://www.zyxel.com/us/en/
Copyright 4, 2020 2wal Communications Corp. All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>