ZYXEL WAX630S WiFi 6 Dual-Radio Unified Pro Access Point User Guide
- June 3, 2024
- ZYXEL
Table of Contents
WAX630S WiFi 6 Dual-Radio Unified Pro Access Point
User Guide
WAX630S WiFi 6 Dual-Radio Unified Pro Access Point
WAX63OS 802.11ax (WiFi6) Dual-Radio Unified Pro Access Point
Hardware Installation
Connect the UPLINK port to a router
with Internet access. If you are not using PoE, connect the WAX630S power
socket to an appropriate power source. Option A App Installation
Use Zyxel Nebula Mobile app to odd o device in the NCC
Download and open the Zyxel Nebula
Mobile app. Log in with your myZyxel account Create an organization and site
or select an existing site. Scan the WAX630S’s QR code to add it to the site
(You can find the QR code in its web configurator or on a label on the device
or its box.)
Note : The WAX630S will go into cloud management mode automatically after
it is registered to a site.
Option B Cloud Web Installation
Use MAC address and serial number to add a device in the NCC
https://nebula.zyxel.com
Follow the steps below to manage the
WAX630S through the Zyxel cloud-based network management system.
Note: Make sure the connected router has Internet access.
- Go to the Zyxel Nebula Control Center (NCC) website (https://nebula.zyxel.com). Click Get Started to sign up for a myZyxel account and log In.
- Create an organization and a site (network) in the NCC.
- Enter the WAX630S’s LAN MAC address and serial number (S/N) (see the label on the device) in the NCC configuration screen.
Note: The WAX630S will go into cloud management mode automatically after it is registered to a site. See the NCC User’s Guide for more information about configuring the WAX630S through the NCC.
Option C Local Web Intallation
http://1.1.1.1orsetup.zyxel.com
From a WiFi enabled computer, search for the WAX630S’s default WWI network
name (Zyxel-xxxx, where xxxx is the last four characters of the MAC address)
and connect to it Open your web browser and enter
“http://1.11.1(setup.zyxel.com)” for initial configuration. Enter the
default user name (admin) and password (1234). Click Login. Note: If the
WAX630S cannot connect to the Internet, use the DHCP-assigned IP address of
the WAX630S to access its web configurator. Check the connected router or DHCP
server for the IP address of the WAX630S.
1-b Wired Connection
1-b Use an Ethernet
cable to connect your computer to the UPLINK port of the WAX630S through a PoE
injector or PoE switch. Use its DHCP-assigned IP or default static IP address
“http://192.168.1.2” to access the web configurator. Make sure your computer
IP address is in the same subnet as the WAX630S’s.
2. The wizard appears automatically.
Use the wizard to set up your WAX630S. Note: It takes 1 to 2 minutes to apply
your wizard changes. The LED turns steady blue if you change the WAX630S
default settings and the WiFi is on.
3. Use the WAX630S’s new wireless settings (SSID and key) to re-connect to
the WAX630S’s WiFi network for Internet access if you change them in the
wizard (or log in to the web configurotor when the WAX630S is using a WiFi
connection). The LED turns steady green when WiFi clients connect to the
WAX630S.
Note : The 111.1 (setup.zyxel.com) is for initial setup only. It is not
usable after the WAX630S is configured.
Note : Check the Dashboard screen and note down the WAX630S’s IP oddress
in cose you need to access its web configurator again.
Wall/Celling Mounting
1-a Wall mounting: Drill two holes for the screw anchors (A), 624 mm
apart Insert the screw anchors into the wall.
1-b Ceiling mounting: Drill two holes for the screw anchors (A), 62.4 mm
or 70.1 mm apart. Insert the screw anchors into the ceiling.
2. Install two mounting screws
through the holes on the bracket (B) into the plugs/anchors to secure the
bracket to the wall/ceiling. Make sure the screws are snugly and securely
fastened to the wall/ceiling.
3. After the bracket is attached to the wall/ceiling, slide the WAX6306 onto
the bracket until it clicks into place.
T-bar Celling Mounting
- Attach two clips to the ceiling grids as shown.
- Install two screws to secure the bracket to the clips.
- Slide the WAX630S onto the bracket until it clicks into the place.
Note: Clips (ACCESSORY-ZZ0105F) are sold separately.
Grounding
- Remove the M4 ground screw from the WAX630S’s rear panel as shown. Secure a green/yellow ground cable (18 AWG or smaller) to the WAX630S’s rear panel using the M4 ground screw.
- Attach the other end of the ground cable to a wall or the ground. Follow your country’s regulations and safety instructions to electrically ground the WAX630S properly. Qualified service personnel must confirm that the building’s protective earthing terminal is valid.
Support Information
EU https://suoloortzvxel.eu
USA +1 800 255 4101 suoloort@Wzyxel.com
See the User’s Guide at www.zyxel.com for more information, including
customer support and safety warnings.
EU Importer Zyxel Communications A/S
Gladsoxevej 378, 2. th. 2860 Soloorg, Denmark
https://www.zyxel.com/dkida/
UK Importer Zyxel Communications UK Ltd.
2 Old Row Court, Rose Street, Wokingham
RG40 1XZ, United Kingdom (UK) https://www.zyxel.com/uk/ert/
US Importer Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
Copyright @ 2021 Zyxel and/or its affiliates.
All Rights Reserved.