Quin A1310 Smart Pill Dispenser User Manual

Smart Pill Dispenser
User Manual

Please read this manual carefully before using the product, and keep it for future reference.

App Download

https://downloadapp.qu-in.life/Pill-Calendar/

| Method 1
Please use your mobile phone to scan the QR code to download the App.
---|---
| Method 2
Search “Pill calendar” to download App.

Instruction Video

Please scan the QR code to watch the tutorial video.
https://www.youtube.com/channel/UCfms4abS7YNLcrR3r4mataA

Package Contents

Note: In case of low battery, please charge before use.

Product Introduction

Understanding the Buttons

Standby| /| Short Press| Activated/ Sleep modes

Advance| activated with top lid shut| To rotate and dispense the pills of the next dose
activated with top lid open| Rotate one notch to  adjust carousel or clear pill jam problem

Cancel| While alarm rings| Turn off current alarm
activated with top lid open| Clear pill picker box jam problem
activated with top lid shut under no abnormal conditions| Press and hold for 3 seconds| Open the pill dropping exit to dispense pills

Note:

• The pill dispenser will be in sleep mode if there is no Bluetooth connection and no button operation for 3 minutes.
• Ensure that the Pill Dispenser is activated before button operation or Bluetooth connection.

Understanding the Light Indicators

Fingerprint Light| Flashing blue light| Fingerprint input mode activated
Flashing green light| Fingerprint input/ recognition successful
Flashing red light| Fingerprint input/ recognition failed

Pill Retrieving Light| Flashing green light| Alarm activated, pill picker box requires taking out
Steady green light| Alarm activated, pill picker box has been taken out
Slow flashing red light| Pill picker box has not been reinstalled for over 1 minute
Fast flashing red light| Pill dispenser is jammed; light goes off after jamming is clear

Charging Light| Red light during charging, green light when fully charged

Product Usage

1. Power On

Turn the power switch to ON, and the power light will flash green, accompanied by a startup melody.

2. Connecting the Pill Dispenser with the App

Step 1
iOS
Open Bluetooth in the iOS Control Center
Android
Enable Bluetooth and location in your phone settings
Note: On Android phones, Location permissions required to turn on Bluetooth in an Android phone

Step 2
iOS
Allow the app to send notifications

Android

1. Grant the app permission to read and write calendar and enable calendar app notifications
2. Enable calendar app notifications in your phone settings

Note: If denied, the app will not be able to send notifications

Step 3
Press the Standby Key to activate pillbox and connect with your phone.
If the power light flashes green slowly, the Pill dispenser is waiting for the Bluetooth connection

Step 4
Connect the Pill Dispenser via Bluetooth and follow the app instructions to input user fingerprint

1. In the app, tap “Start fingerprinting on the pill box”

2. Pill dispenser fingerprint indicator flashes blue to indicate fingerprint input mode is on

3. Please press a single fingerprint six times from various angles. The blinking green light indicates successful fingerprint enrollment.

4. Voice prompt
   Fingerprint input successful

3. Opening the Pill Dispenser

1. Fingerprint Unlock:
   After successfully inputting user fingerprint, place the finger on the fingerprint module while the Pill Dispenser is activated. A green light will flash and the top lid will open.

2. Emergency Unlock:
   If necessary, lift the Pill dispenser and unlock with the key. If the Pill Dispenser is filled, do not flip over to unlock the pill box, in case of the risk of medication confusion and spillage.

4. Selecting the Dosage Ring

• Select the suitable dosage ring by referring to the description on the back of the ring.
• Example:
  Dosage Ring 2 is suitable for a medication taken 2 times/day;
  Dosage Ring 3 is suitable for a medication taken 3 times/day. 5. Refill Pills

1. While the Pill Dispenser is activated with the top lid open, adjust the dispensing carousel by pressing the Advance button, and the compartments will automatically align with
   the pill dropping exit .

2. Place the dosage ring on the dispensing carousel and align the start or orange part with the pill dropping exit .

3. Refill the pills

4. Close the lid

6. Setting Alarms on the App and Syncing with the Pill Dispenser

1. Ensure the Pill dispenser is connected with the app

2. Follow the app instructions to set alarms for the Pill Dispenser, Successful voice prompt: Setup completed.
   

7. Retrieving Pills
Normal condition

1. Alarm rings

2. Take out the pill picker box
   

3. Pour out pills

4. Reinstall the pill picker box
   

Pick up medicine in advance

1. Example: Set the alarm for 12:00AM and tried to take my meds early at 11:00AM.
2. While the Pill Dispenser is activated with the top lid shut, press the Advance button
3. The dispensing carousel will turn one notch, and the pills will be released to the pill picker box (no alarm will rings; the pill retrieving light will blinks green).
4. reinstall the pill picker box after retrieving the pills

Note:

• To prevent accidental overdose, pills can only be removed once between alarms by pressing Advance button. The Pill dispenser will not respond to further press between alarms.
• Advance retrieval is a one-time action that does not cancel any previously set alarms.

Canceling the Current Alarm

1. Example: Set the alarm for 12 o’clock, it will ring at 12 o’clock, when it rings you can press Cancel button to stop.
2. While the Pill Dispenser is activated with the lid shut, press the Cancel button
3. The current alarm will be canceled, the ring tong will stop, and the pill retrieving light will stop flashing

Note: Alarm cancellation is a one-time action that does not cancel any previously set alarms. Tomorrow it will ring at the set time.

Missed Retrieval

1. The alarm clock will ring intermittently for about 15 minutes.
2. If the pills are not taken within this time, the ringtone will stop and a missed reminder will be logged.
3. The pill-retrieving light will continue to flash green before the retrieval is made.

Note: Prolonged light flashing will increase power consumption and reduce standby time.

Pill Dispenser Jam

1. If the dispensing carousel is jammed: Open the top lid, remove the jammed pill with tweezers, and press the Advance button to resume normal operation.
2. If the pill picker box is jammed: Open the top cover, remove the jammed pill with tweezers, and press the Cancel button to resume normal operation.
3. If pills do not fall completely into pill picker box: When the Pill Dispenser is activated with the top lid shut without any abnormal condition, press and hold the cancel button for 3 seconds to open the pill dropping exit and drop the pills. Or use tweezers to pick up the pills after opening the lid.

8. Ringtone Settings

While Bluetooth is connected

1. Choose from default ringtones A, B,C or customize the ringtone.
2. Record a 60-second sound as a custom ringtone. Speak close to the microphone to make sure the & recorded sound is clear.
3. Modifying the ringtone will replace the existing custom ringtone.

9. Volume Settings
While Bluetooth is connected
Choose from mute, low, or high volume.

Specifications

1200mA Lithium Battery
Power Input| 5V 2A
Supported Operating Systems| Android
iOS

Frequently Asked Questions

How to remove and install the dispensing carousel?
Remove the dispensing carousel

Install the dispensing carousel
Calibrate the dispensing carousel

Frequently Asked Question
If you have any questions, please contact us.

https://download.daviky.shop/faqs

Cleaning and Maintenance

1. The dispensing carousel and pill picker box can be removed for cleaning. Clean and dry thoroughly before reinstalling.

2. Use a soft damp cloth to wipe the middle frame.
   Note: Do not wet the electronic parts as it may cause a short circuit.

3. Before adding pills, make sure the Pill dispenser is clean and dry.

4. Use the included data cable to charge the pill box when the battery is low.

Precautions

1. Keep the pill dispenser out of the reach of children. It is not intended for use by children.
2. Ensure that the pill dispenser is stored securely. Accidental dropping may cause damage.
3. If you miss a dose for any reason, please contact your physician for professional advice.
4. Some medications have specific storage requirements such as temperature and humidity. Please consult your physician if you are unsure whether this pill box is suitable for storing your medication.
5. Charge the Pill Dispenser promptly to ensure smooth operation.
6. Do not place the pill box near open flames or heat sources, as it may cause fire, electric shock, product damage, or injury.
7. Please contact us in case of malfunction.
   – This device contains a lithium-ion battery.

You should recharge the battery at least once every six months, to ensure that they stay functional. If the battery is not used for a long time, the charging time may become longer, or the battery may not be able to charge.
The battery cannot be charged at a temperature outside of that which is specified. Charge the battery within the specified temperature range.

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet that is on a different circuit than the radio or TV.
• Consulting the dealer or an experienced radio/TV technician for help.

FCC Caution:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate this equipment.
• This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with  electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

FCC Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

SIMPLIFIED EU DECLARATION OF CONFORMITY

**** Hereby, Zhuhai Quin Technology Co., Ltd. declares that this product is in compliance with Radio Equipment Directive 2014/53/EU. The full texts of the EU declaration of conformity is available at the following internet address: https://zoksi.shop/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>