HYTRONIK HBTD8200S Bluetooth On Off Wireless Module User Guide
- October 30, 2023
- HYTRONIK
Table of Contents
Dimmers with
5.0 SIG Mesh
| HBTD8200S | HBTD8200T/HBTD8200T2 | HBTD8200V | HBTD8200D |
|---|---|---|---|
| Relay Control | Trailing Edge | 0/1-10V | DALI |
On-off Version DALI / 1-10V Version
Trailing Edge (150VA) Trailing Edge (2 x 100VA)
Product Description
HBTD8200 series are designed to fit into a junction box or electrical box to make Push switch (retractive switch) to achieve on/off control, dimming control, colour tuning and even scene recall. Whether used for new build or retro-fit projects to add intelligent control to standard lighting fixtures, HBTD8200 series does it all. Simple device setup and commissioning can be done via app.
App Features
Floorplan feature to simplify project planning
Grouping luminaires via mesh network
Scenes
Push switch configuration
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Device firmware update over-the-air (OTA)
Power-on status (memory against power loss)
Offline commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean BLE switches
Continuous development in progress…
Hardware Features
HBTD8200S – ON/OFF relay switch:
− 400VA (capacitive)
− 800W (resistive)
HBTD8200T – Trailing edge output:150VA (capacitive)
HBTD8200T2 – Trailing edge output: 2 x 100VA (capacitive)
HBTD8200V – 1-10V output with relay control:
400VA (capacitive) and 800W (resistive)
HBTD8200D – 100mA DALI broadcast output for up to 50 LED drivers
Compact design
2 Push inputs for flexible manual control
Zero crossing detection circuit to reduce in-rush current and prolong relay
lifetime (HBTD8200S & HBTD8200V)
Short-circuit protection
Overload protection
5-year warranty
- Certain scenes which require external photocell can be achieved by using together with Hytronik Bluetooth sensors,such as HBIR29, HCD038/BT + sensor head etc.
EnOcean
Self-powered IoT
Fully support EnOcean self-powered switch
module PTM215B (HBES01/W & HBES01/B)
5.0 SIG mesh
iOS
Android
|
for iOS for Android
Smartphone app for both iOS & Android platform
|
for iPad
Koolmesh Pro app for iPad
Web
|
for Web
Web app/platform: www.iot.koolmesh.com
-
Retractive switch
-
Bluetooth dimmer
HBTD8200T -
Downlights
Technical Specifications
Bluetooth Transceiver
Operation frequency|
2.4 GHz – 2.483 GHz
Transmission power|
4 dBm
Range (Typical indoor)|
10~30m
Protocol|
5.0 SIG Mesh
Environment
Operation temperature|
Ta: -20°C ~ +45°C
Case temperature (Max.)
HBTD8200S
HBTD8200T
HBTD8200V
HBTD8200D
HBTD8200T2
|
Tc: +75°C
Tc: +80°C
Tc: +75°C
Tc: +75°C
Tc: +75°C
Storage temperature|
-20°C ~ 60°C
Relative humidity|
20 ~ 90%
IP rating|
IP20
Insulation|
Class II
Input & Output Characteristics
Operating voltage:
HBTD8200S
HBTD8200T
HBTD8200V
HBTD8200D
HBTD8200T2
|
220~240VAC 50Hz
230VAC 50Hz
220~240VAC 50Hz
220~240VAC 50/60Hz
230VAC 50Hz
Stand-by power|
<0.5W
Load ratings:
HBTD8200V
HBTD8200D
HBTD8200T
HBTD8200T2
HBTD8200S
|
400VA(Capacitive), 800W(Resistive)
100mA,16VDC (max. 50 devices)
150VA(Capacitive), 150W(Resistive)
2x100VA(Capacitive), 2x150W(Resistive)
400VA(Capacitive), 800W(Resistive)
Safety & EMC
EMC standard (EMC)|
EN55015, EN61547
EN62479, EN61000
Safety standard (LVD)|
IEC/EN 61058, AS/NZS 61058
Radio Equipment (RED)|
EN300 328, EN301489-1/-17, EN62479
Certification| Semko, CB, CE , EMC, RED, RCM
Mechanical Structure & Dimensions
HBTD8200D – DALI Version
HBTD8200V – 1-10V Version
HBTD8200T – Trailing Edge Version (150VA)
HBTD8200T2 – Trailing Edge Version (2 x 100VA)
HBTD8200S – On/off Version
Wire Preparation
To make or release the wire from the terminal, use a screwdriver to push down the button.
- 200 metres (total) max. for 1mm² CSA (Ta = 50℃)
- 300 metres (total) max. for 1.5mm² CSA (Ta = 50℃)
Wiring Diagram
DALI Version
HBTD8200D
1-10V Version
HBTD8200V
Trailing Edge Version (150VA)
HBTD8200T
Trailing Edge Version (2 x 100VA)
HBTD8200T2
On/off Version
HBTD8200S
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches.
Detailed Push switch configurations can be set on Koolmesh app.
Switch Function
| Action|
Descriptions
---|---|---
Push switch
|
Short press (<1 second)
- Short press has to be longer than 0.1s, or it will be invalid.
| – Turn on/off
– Turn on only
– Turn off only
– Recall a scene
– Exit manual mode
– Do nothing
Double push
| – Turn on only
– Turn off only
– Recall a scene
– Exit manual mode
– Do nothing
Long press (≥1 second)
| – Dimming
– Colour tuning
– Do nothing
Simulate sensor
|
/
| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology->Bluetooth Dimmers
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice. Edition: 21 Jun. 2021 Ver. A2