SONY HT-A3000 Soundbar User Guide

June 4, 2024
Sony

Sound Bar

Startup Guide

HT-A3000

5-034-487-11(1)

© 2022 Sony Corporation      Printed in China

What’s in the box

Bar speaker (1)

Remote control (1) / R03 (size AAA) battery (2)

SONY HT-A3000 Soundbar C

AC power cord (mains lead) (1) (The shape of the plug differs depending on countries/regions)

HDMI cable* (1)        TV center speaker mode cable (1)

WALL MOUNT TEMPLATE (1)     Operating Instructions

Startup Guide (this document)

  • Supports the specification equal to High Speed HDMI Cable with Ethernet.
1 Choose an installation method

Installing on a shelf/stand

or

Mounting on a wall
For details, refer to the Operating Instructions (separate document).

Note

  • Before connecting the speaker system, disconnect the AC power cord (mains lead) of the TV from the AC outlet (mains). Reconnect it in step 4.
  • Do not place metal objects near the speaker system. Wireless functions may become unstable.

To set up with the optional subwoofer and/or rear speakers
The confirm screen for the speaker connection appears on the TV screen in step 5. Connect the optional speakers to the speaker system by following the screen instructions.

2 Connect with a TV

Is there an HDMI IN jack labeled “eARC” or “ARC” on your TV?

YES

SONY HT-A3000 Soundbar 01

  1. Blu-ray Disc player, set-top box or gaming console, etc.
  2. HDMI cable (supplied)

: Video signal
: Audio signal

NO

SONY HT-A3000 Soundbar 02

: Video signal
: Audio signal

  1. Blu-ray Disc player, set-top box or gaming console, etc.
  2. HDMI cable (supplied)
  3. Optical digital cable (not supplied)

1 Connect the HDMI cable (supplied) to the HDMI OUT jack on the speaker system and the HDMI IN jack on your TV.
If your TV has the S-CENTER SPEAKER IN jack, connect the S-CENTER SPEAKER IN jack on your TV to the S-CENTER OUT jack on the speaker system using the TV center speaker mode cable (supplied).
2 When your TV does not have an HDMI IN jack labeled “eARC” or “ARC,” use an optical digital cable (not supplied) to connect an optical out jack on your TV and the TV IN (OPT) jack on the speaker system.
There will be no TV sound output from the speaker system if the TV and the speaker system are connected only using the HDMI cable.

NOTE

  • Make sure that the connectors are firmly inserted.
  • Check the shape of the optical digital cable’s connectors and the jacks on the TV and the speaker system. Insert the connectors into the jacks in the right directions. If you forcibly insert the connectors in the wrong directions, the connectors and the jacks may be damaged.
  • If you select “YES,” enable the Control for HDMI function on the TV. Otherwise, there will be no TV sound output from the speaker system.
3 Set up the remote control

SONY HT-A3000 Soundbar 03 A

4 Turn on the TV and the speaker system

SONY HT-A3000 Soundbar 04 A SONY HT-A3000 Soundbar 04
D

A AC power cord (mains lead)
B AC power cord (mains lead) (supplied)
C AC power cord (mains lead) (supplied)
D HOME

1 Connect the TV’s AC power cord (mains lead) to the AC outlet (mains).
2 Connect the AC power cord (mains lead) to the AC inlet on the speaker system.
3 Connect the AC power cord (mains lead) to the AC outlet (mains).
The remote control of the speaker system does not work until [HELLO] in the front panel display on the speaker system disappears.
4 Press HOME on the remote control of the speaker system after [HELLO] in the front panel display disappears.
Wait until [PLEASE WAIT] in the front panel display disappears and next indication appears in the front panel display.

5 Perform Initial Settings

SONY HT-A3000 Soundbar 05 A

  1. HOME
  2. Initial Settings screen

1 Follow the instructions on the screen displayed on the TV to perform initial settings with and .
If the initial setting screen is not displayed, use the TV remote control to switch the input on the TV to the HDMI input that is connected to the speaker system, then press HOME on the remote control of the speaker system.
2 If you use the optional subwoofer/rear speakers, connect them by following the instructions on the [Checking Wireless Speaker Connection] screen.
3 Once [Setup is complete.] appears, select [Learn more].

6 Listen to sound

SONY HT-A3000 Soundbar 06 A

To listen to the audio of the TV
1 Select the desired input to the TV using the TV remote control.
The screen switches to the selected input screen and the TV audio is output from the speaker system.
If [TV] does not appear in the front panel display on the speaker system, press TV on the remote control of the speaker system to select the TV input. [TV] appears in the front panel display on the speaker system.

Note
Depending on the order in which you turn on the TV and speaker system, the speaker system may be muted and [MUTING] may appear in the front panel display on the speaker system. If this happens, turn on the TV first, then the speaker system.

How to use the speaker system / Troubleshooting

Operating Instructions (booklet)
Describes basic usage such as installation/connection and playback of connected devices.

Help Guide (Web instruction manual)
Describes all the usage such as the network function and the detailed setting method, including the contents of the Operating Instructions.

SONY HT-A3000 Soundbar 07 C

For troubleshooting when the speaker system does not operate correctly, see “Troubleshooting” in the Operating Instructions or Help Guide.

For customers in Americas
https://rd1.sony.net/help/ht/a3000/h_uc/

For customers in other countries/ regions
https://rd1.sony.net/help/ht/a3000/h_zz/

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals