Lenco BTC-070 Bluetooth Speaker with Karaoke Microphone with Extendable Stand User Manual

June 4, 2024
Lenco

Lenco BTC-070 Bluetooth Speaker with Karaoke Microphone with Extendable

Stand

Lenco-BTC-070-Bluetooth-Speaker-with-Karaoke-Microphone-with-Extendable-
Stand-product-image

CAUTION: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

  1.  Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) free space around the whole device.

  2. Install in accordance with the supplied user manual.

  3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and
    other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

  4. Avoid using the device near strong magnetic fields.

  5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

  6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

  7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

  8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

  9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

  10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

  11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

  12. Keep away from animals. Some animals enjoy biting on power cords.

  13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.

  14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

  15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

  16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.

  17. The rating label has been marked on the bottom or back panel of the device.

  18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

  19. This product is intended for non professional use only and not for commercial or industrial use.

  20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

  21. Never remove the casing of this device.

  22. Never place this device on other electrical equipment.

  23. Do not allow children access to plastic bags.

  24. Only use attachments/accessories specified by the manufacturer.

  25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

  26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

  27. If the product is delivered with power cable or AC power adaptor:

    • If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel
    • . Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection. Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
  28. If the product contains or is delivered with a remote control containing coin/cell batteries:

    • Warning: “Do not ingest battery, Chemical Burn Hazard” or equivalent working. [The remote control supplied with] This product contains a coin/button cell battery.
    • If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  29. Caution about the use of Batteries:

    • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
  • Unpack all parts and remove protective material.
  • Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

In the Box:

  • 1pcs 3.5mm Auxiliary Cable (30)

  • 1pcs Remote Control

  • 1pcs AC/DC Charging Adaptor (29)

  • 1 pcs Wired Microphone

  • 1pcs Adjustable Mic Stand

Description of The Unit

Top View

  1. Mic Stand Holder
  2. Handle
  3. Light effect Selection switch (5 + off)
  4. LED Indicator
  5. ON/OFF switch
  6. Charging Port
  7. 3.5mm Auxiliary Input Port
  8. Mic 1 Input
  9. Mic 2 Input
  10. Mic Volume Knob
  11. Mic Echo Knob
  12. Master Volume Knob for MP3, aux and BT
  13. TF card slot
  14. USB slot
  15. Previous track
  16. Play/Pause/Source selection(Double-click)– increased
  17. Next track
Accessories:

Remote Control

  1. ON/OFF
  2. Play/Pause/Bluetooth pairing(need remove, without this function)
  3. Title number selection
  4. Source selection
  5. Mute (Note: Mute will not work when a microphone is connected)
  6. Previous
  7. Next
  8. Decrease volume
  9. Increase volume
  10. Repeat
  11. Party illumination function

Before first use:

  1. The appliance can be powered either via a wall outlet or by the integrated
    battery

  2. Connect the mains adaptor (29) with the power socket DC 5V (6) at the top if the appliance. Connect the mains adapter (29) to a suitable wall outlet. Make sure that the power supply voltage is the same as needed.

Basic Function
Bluetooth Operation

  1. Press the button mode (5 or 18) repeatedly, a tone will be heard and the indicator (4) will quickly flash BLUE.
  2. Turn on the Bluetooth function on your external Bluetooth device, search on it for the Bluetooth device with the name “Lenco BTC-070” .Select the Lenco BTC070 and the pairing will start. Once connected you will hear a beep and the LED indicator (4) will flash slowly. It could be that you have to enter a password “0000”.

Source selection
Press button (16) twice can switch between BT, AUX, USB, TF mode.

Using with a Wired Device
You can connect an audio device with a 3.5mm connector to the Lenco BTC-070. Please use the audio cable (30) and connect 1 side to your device (audio out or headphone out) to the 3.5mm connector (7) of the BTC-070.

Using USB playing
Insert a USB stick in the USB port (14). Press button(16) for play and pause. Press buttons (15) to go back to previous and button (17) to go to next track.

You can also press any number (20) on the remote control to access the selected song.

Using SD card playing
Insert a micro SD card in the card slot (13). Press button(16) for play and pause. Press buttons (15) to go back to previous and button (17) to go to next track.

You can also press any number (20) on the remote control to access the selected song.

For Volume Adjustment
There are two different ways for adjustment:

  1. You can press the VOL-(25) or VOL+(26)
  2. You can adjust the Knob (12)
Technical Specifications

Bluetooth Version 5.0
AC power input 100-240V, 50/60Hz 0.3A
Speaker output power 8W
AUX in 3.5mm auxiliary audio input jack

Power supply adaptor: (For EU only)
Use only original AC adaptor
Use only the power supply listed in the user instructions.

Information published Value and precision
Manufacturer’s name or trade mark commercial registration number and address

Shenzhen Super Global Electronics Co., Ltd
Model identifier| SQ050100-S08EUD/SQ050100-S08UKD
Input voltage| 100V-240V
Input AC frequency| 50/60Hz
Output voltage| 5V
Output current| 1A
Output power| 5W
Average active efficiency| 72.5%
Efficient at low load (10%)| 69%
No-load power consumption| 0.075W

Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non- official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements. The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service
For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals