Foshan Yehang Electronic SM-666 Multifunctional Air Purifier User Manual

Foshan Yehang Electronic
SM-666 Multifunctional Air Purifier
User Manual

Thank you for purchasing this air purifier. Please read the instructions carefully before using it to achieve a better effect. Please keep the instructions after reading them so that you can consult them at any time.

Product accessories

Please check to confirm below accessories were included in the packing carton.

1. User Manual
2. Adaptor(DC12/2.5A
3. DC connector
   • The size listed in User Manual is the same size as a sample, for your reference.
   • All designs and sizes regarding AIR PURIFIER are subject to change without notice.

Specification parameter

(Implementation standard: GB/T 18801‐2015 )

Noise ( sound power level ): 52dB ( A )
Screens Expiration Prompt: Yes| CADR: 50 m3 / h| UVC length: 270-280nm
Product size: 320 187 170mm| Purification Energy
Efficiency: Qualified Level| Wind speed pattern: low, medium, and high
Net weight:| Gross weight:| Packing size:

Product function

• Air quality inspection
• LED display
• HEPA composite high‐efficiency filter screen
• UV Sterilization function
• Bluetooth music playing function

About Air Purifier

The air purifier adopts an efficient HEPA \ HESA filter and UV sterilization technology and adopts intelligent sensors to detect ambient air quality and temperature and humidity. This air purifier is used for indoor air purification. With it, you can breathe cleaner air and ensure environmental comfort. This air  purifier has the following functional configurations:

• Efficient HEPA, HESA Filter System
  HESA effectively kills harmful microorganisms, decomposes harmful gases such as benzene, toluene, formaldehyde, hydrocarbons, halogenated hydrocarbons, etc. in the environment, secondhand smoke or irritant gases, and eliminates off‐flavor ( eliminating off‐flavor from chemical reactions such as respirators and sweat); The HEPA filter screen can remove more than 99.9 % of fine particles ( PM 2.5 ), bacteria, smog,  mold, spores, mites, etc., and can filter environmental toxic substances to the maximum extent and inhibit the growth of microorganisms and bacteria.

• Intelligent air quality sensing system
  Real-time monitoring and showing air quality; Based on that, purification efficiency can be adjusted on time and you could enjoy the fresh air at any time.

• Large‐power air outlet engine and UV sterilization
  The large‐power air outlet engine ensures higher air volume and UV Led generates ultraviolet with the wavelength from 270nm to 280nm, which can destroy the DNA structure and RNA structure of bacteria and viruses and kill growth cells and regrowth cells to reach the sterilization effect.

• Place of use
  Suitable for study, bedroom, and small living room.

Safety precautions

Danger
Do not allow water or any other liquid or flammable detergent to enter the product to avoid safety problems such as electric shock or fire.
Do not insert hard objects into the air inlet and outlet to avoid product damage.
Do not extend your fingers into the air outlet and air inlet during product operation to avoid injury.
Please use this product in places where children do not have access to it.

Warning
Before connecting the product power plug to the power supply, please confirm whether the connected power supply is consistent with the input power supply parameters of the product identification.
If the power cord is damaged, in order to avoid danger, it must be replaced by professionals from the maintenance department designated by the manufacturer or similar departments.
If the plug, power cord, or product itself is damaged, do not use this product and repair it in time.
This product is not designed for people ( including children ) who are physically unsound, feel or mentally handicapped, or lack relevant experience and knowledge.
Use, unless someone responsible for their safety directs and supervises their use of the product;
Do not block the air inlet and outlet of the product and keep the surrounding air unobstructed.
During maintenance, always unplug the power plug.

wireless charging

This product is a  mobile phone wireless charging accessory product and supports  QI  mobile phone wireless charging.
Note: When using, please lay the wireless receiving position of the back shell of the mobile phone on the launch plane of the product, and slightly move the mobile phone until the mobile phone automatically displays the charging icon.

1. Input voltage: DC-3-5V/1.5A
   2 ) Output voltage: 5V/1000mA
   3 ) Power conversion: >70%
   4 ) Operating frequenc: 100″200KHz| Nokia Lumia820, Nokia Lumia920, Nexus4, HTC 8X
   ( US Edition ), HTC Droid DNA ( US Edition ), Nexus 10 Flat Panel Electricity Brain, Nexus 7,
   Samsung: S6, 57 ,58„S9, Note5, Note6, Note7, Note8, iPhone: iPhone X, 8, 8 Plus
   *Additional receiving coil is required:
   Samsung: S3, S4, S5, Note2, Note3, Note4 Apple: iPhone5, 5S, 6, 6Plus, 7, 7Plus

Product operation control

Function control and display:
The operation and control of each function of the product is regulated by the touch function key. When the key is touched, the product sends out a ” BI” sound response and displays the current setting or operation status through each corresponding icon in the display screen. The corresponding icon is described as follows:

1. Wireless charging transmission
2. Clean air outlet and air quality status color display window
3. Speaker
4. Speaker
5. LED display screen
6. Timing key
7. Turn on/off key
8. Wind speed key
9. Automatic key

Key icon display and operation instructions

| After powering on BIBI two times, press this key to turn it on / off, and the automatic operation mode.
---|---
| When the product is running, press this key to adjust the running wind speed and adjust it in low, medium, and high-speed cycles. The LED screen displays the wind speed icon at the same time, indicating the current operating wind speed status.
| Press the timing key for the first time to select 1H, 2H, 7H, 8H timing mode or OH canceling timing; When a certain timing state is selected, the timing icon of the display screen flashes three times slowly and then is always on, which means the timing is effective. The second press will be timed to view: and the third press will reschedule the operation.
| Press the automatic key system to enter the automatic operation mode, and the system automatically adjusts the wind speed according to the detected ambient air quality to effectively purify the polluted air. ( Repeat press in Low-Speed Mode )
| Press the sleep key system to enter the mute and rest screen operation mode, and press alone to resume the normal operation mode.
| Press for a long time and “Bi” sounds to turn on or off the Bluetooth function.
After the Bluetooth pairing connection with the mobile phone ( Bluetooth name SM – 666 ) is successful, the mobile phone music can be played and the sound volume can be adjusted.
UV| UV sterilization icon display. long-press the to turn off or turn on the UV sterilization function.
| Running wind speed icon display.
| PM 2.5 Icon Display.
| Air quality index display:(0-15)-Blue; (16-35)Green; (36-75) Red; (76-999) polluted-Red temperature automatic. Long press the automatic key to display the temperature and humidity, and it will automatically recover after six seconds. Long press the automatic key to display the temperature and humidity, and it will automatically recover after six seconds.

Product maintenance:

(Please pull out the power supply before maintenance)

Daily cleaning focus on the surface of AIR PURIFIER as well as, the place for wind inlet and outlet When cleaning, use a soft dry towel to wipe dust and duty. When using a wet towel, it needs to be wrung out before using it to clean AIR PURIFIER. Don’t leave any water-based stains on the product.

WARNING
Pull out the plugs before cleaning the surface of the AIR PURIFIER and refer to the maintenance guide mentioned before to open the front panel and take out the connected line; Do not put AIR PURIFIER into the water and any other liquid; Water or liquids can not sprinkle on AIR PURIFIER directly; Do not use corrosive or flammable cleaners to clean any parts of AIR PURIFIER.

HEPA filter replacement

(Tip: please pull out the power supply before changing!)

1. Tips for replacement of air filter during effective use:
   When the machine is powered on for the first time, the system will automatically memorize it, counting from 0-to 600 hours.
   When the filter expires, the display screen will be “600” every time it is turned on. The buzzer will flash 5 times and the the buzzer will beep 5 times to prompt the user to replace the filter network;

2. Re-initialize the system after the filter is replaced

In the standby state, press the automatic button for 3 seconds, the display shows “600” slowly flashing and then press the timer button for 3 seconds, the display shows  “000” and then the beep will beep once. The system will automatically turn on, that is, the initial filter replacement is successful; Re-memory, counting from 0-600 hours in increments.

ATTENTION
To protect our environment, please replace the filter after service time is up.
Please pay attention:  if replacing the filter is early then service time is expired but without setting  600‐ the hour memory countdown function, the system will ignore the new filter’s service time, instead of it, the system will continue to count down service time based on the previous filter.
The shell life of the filter is about 4‐6 months.
When replacing the filter, please purchase the replacement filter through a formal channel.
Due to environmental pollution is not the same in each region, we advise every month to check the filter
at least one time. For healthy purposes, please replace it immediately when the filter is dirty.

Common problems and their solutions

Please check the power supply is correct. Or, check the plug if connect to the power properly
Others| Sent back to the distributor or original factory for  maintenance
Blower, unworkable| internal part loose, poor contact| sent back to the distributor or original factory for maintenance, don’t repair by yourself.
Wind speed slows down under the same working mode| The filter is too dirty, wind
resistance| Replace the filter
Change speed mode to
“automatic”| Under Automatic mode, wind speed is adjusted by itself according to surrounding air quality.  The difference speed will give out under this model.
Big Sound| Too much dust gathers on the filter| Replace filter
Unexpected things inside air flue| Take it out unexpected things from the air flue, or  send back to the distributor for the handling
Unable to connect to Bluetooth
( SM-666 )| check the Bluetooth setting if it is
correct| Check the Bluetooth setting or connect Bluetooth  again

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>