ZYXEL DX3300-T1 Dual-Band Wireless AX1800 VDSL2 Gigabit Gateway User Guide

: October 30, 2023
: ZYXEL

Table of Contents

Package Contents
Support Information
Hardware Connections
WiFi Connection
Quick Start Wizard
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZYXEL DX3300-T1 Dual-Band Wireless AX1800 VDSL2 Gigabit Gateway

Package Contents

Device
Power Cable
Ethernet Cable
Phone Cable
Quick Start Guide
Declaration of Conformity Safety Warnings

Support Information

https://service-provider.zyxel.com/globo1/en/tech-support

See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.

EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 S0borg, Denmark.
https://www.zyxel.com/dk/da/
UK Importer
Zyxel Communications UK Ltd.
2 Old Row Court, Rose Street, Wokingham, RG40 1XZ, United Kingdom (UK)
https://www.zyxel.com/uk/en/
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/

Hardware Connections

	DSL	WAN/LAN4	LAN1-3	USB	2.4G/5G WiFi
DX3300-T1	V	V	V	V	V
EX3300-T1	X	V	V	V	V

Use the gray phone cable to connect the DSL port to a DSL splitter or directly to the telephone wall outlet.
use an Ethernet cable to connect the WAN port to a gateway modem.
Connect a computer to the LAN port using the yellow Ethernet cable (optional).
Connect the power cable to the Zyxel Device and press the power button.

INTERNET

| Green
On – Internet is ready.
Blinking – The Zyxel Device is transmitting/receiving Internet data.

Red
On – The Zyxel Device attempted to get an IP address, but failed.
Off – Internet is not ready.

---|---

POWER

| Green
On – Power is on.
Blinking – The Zyxel Device is starting up.

Red
On – There is a malfunction.
Blinking – The Zyxel Device is upgrading firmware.

WiFi Connection

use the SSID and Wireless key on the device label to connect wirelessly to the Zyxel Device.
On your smartphone or notebook, find this SSID. Enter the Wireless key to connect.

Press the WPS button until the WiFi 2.4G and 5G LEDs light up in amber.
Press the WPS button on the client. If the WPS method fails, use the SSID and wireless key to set up a WiFi connection (2-a).

| Amber
Blinking – The Zyxel Device is connecting to 2.4 GHz WiFi via WPS.

Green
On – 2.4 GHz WiFi is ready.
Blinking – The Zyxel Device is transmitting/receiving data.

---|---
| Amber
Blinking – The Zyxel Device is connecting to 5 GHz WiFi via WPS.

Green
On – 5 GHz WiFi is ready.
Blinking – The Zyxel Device is transmitting/receiving data.

Quick Start Wizard

Open a web browser and go to http;//192.168.1.1. Enter the default User Name (admin) and ad min Login Password (on the device label), and then click Login. The Wizard runs. Follow the Wizard prompts to complete the setup.