ZYXEL WX5600-T0 Dual-Band Wireless AX6000 Gigabit Extender User Guide
- October 30, 2023
- ZYXEL
Table of Contents
ZYXEL WX5600-T0 Dual-Band Wireless AX6000 Gigabit Extender
Package Contents
Support Information
EU
El https://support.zyxel.eu
USA
11.,, + 1 800 255 4101 181 support@zyxel.com
See the User’s Guide at www.zyxel.com for more
information, including customer support and safety warnings.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 S0borg, Denmark. https://www.zyxel.com/dk/da/
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001 https://www.zyxel.com/us/en/
UK Importer
Zyxel Communications UK Ltd.
2 Old Row Court, Rose Street, Wokingham, RG40 1XZ, United Kingdom (UK)
https://www.zyxel.com/uk/en/
Setting Up the Zyxel Device
- Attach the bracket to the bottom of the Zyxel Device as shown .
- Place the Zyxel Device where you want to extend your wireless network.
- Plug in the power adapter and turn on the Zyxel Device. Wait for about 2 minutes. The Power(‘.) LED lights up steady green.
MPro Mesh Network Scenario 1: With MPro Mesh Router
In this scenario, you have a Zyxel router that supports MPro Mesh. If you do
not, go to Network Scenario 2.
Note : To check if your Zyxel router supports MPro Mesh, scan the QR code
in the last page to see the MPro Mesh Router supported list.
Note: To set up your Zyxel Device with the MPro Mesh opp, scan the QR
code in the last page.
- Use the included Ethernet cable to connect the Zyxel Device LAN port to the MPro Mesh Router LAN port. Wait until the POWER and LINK LEDs are steady green.
- Unplug the Ethernet and power cable from the Zyxel Device.
- Place the Zyxel Device where you want to extend your wireless network.
- Plug in the power adapter. Make sure your LINK LED is steady green. Move the Zyxel
Device -2 closer to the Zyxel Device-1 if the LINK LED is red. For more details on the LEDs, please refer to the LED table. To add more extenders to your network, repeat from step 1. Note : You do not need to plug in the Ethernet cable in this step.
MPro Mesh Network Scenario 2: With Non-MPro Mesh Router and Two Zyxel
Devices
- Use the included Ethernet cable to connect the first Zyxel Device (Zyxel Device-1) LAN port to the Non-MPro Mesh Router LAN port. Wait until the POWER and LINK LEDs are steady green.
- Use another Ethernet cable to connect the second Zyxel Device (Zyxel Device-2) LAN port to the first Zyxel Device (Zyxel Device-1) LAN port. Wait until the POWER and LINK LEDs on Zyxel Device-2 are steady green.
- Unplug the Ethernet and power cable from the Zyxel Device-2.
- Place the Zyxel Device-2 where you want to extend your wireless network.
- Plug in the power adapter. Make sure your LINK LED is steady green. Move the Zyxel
Device -2 closer to the Zyxel Device-1 if the LINK LED is red. For more
details on the LEDs, please refer to the LED table. To add more extenders to
your network, repeat from step 2.
Note : In this scenario, do not unplug the Ethernet cable connecting the
Zyxel Device-1 and Non-MPro Mesh Router.
Download the MPro Mesh app to manage your Zyxel Device.
Note: To manage your Mesh network, connect the MPro Mesh app to the
Controller (MPro Mesh Router in Scenario 1 or Zyxel Device-1 in Scenario 2).
Scan this QR code to see a list of Zyxel devices that support MPro Mesh.
Scan this QR code to see steps for setting up your Zyxel Device with the MPro Mesh app.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>