DAddario DIY Solderless Mini Audio Plugs Instructions
- October 30, 2023
- DAddario
Table of Contents
DIY Solderless Mini Audio Plugs
Instructions
DIY Solderless Mini Audio Plugs
The D’Addario DIY Solderless Pedal Board Cable System is the ultimate solution
for custom wiring your pedal board or rack gear. Producing flawless and great
sounding cables is as simple as cutting the cable to length, placing the cable
end into the plug end, and securing the set screw. These connectors are
designed to give you the most accurate and reliable reproduction of your
sound, while the patented Geo-Tip design provides an improved connection in
any pedal, amp, or jack. The Mini Audio Plugs can be configured
for straight or right angle connections and use less space than standard audio
plugs. For use with the 3/16” D’Addario DIY Mini Instrument Cable only. Sold
separately.
| Cleanly cut cable to desired length avoiding any loose or overhanging
strands of shielding.
---|---
| Loosen set screw on plug to
allow clear entry to plug barrel. Push cable into open plug end with a
“twisting” motion until it is fully seated.
| Completely tighten set
screw.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>