GiveBest PTC-905 Ceramic Heater Instruction Manual

June 9, 2024
GiveBest

GiveBest-logo

GiveBest PTC-905 Ceramic Heater

GiveBest Ceramic Heater – PTC-905

The GiveBest Ceramic Heater is a powerful and efficient heater that is designed to provide warmth and comfort in your home or office. This model, PTC-905, comes with advanced safety features and a durable build that ensures long-term use.

Important Safety Instructions

Please read the following safety instructions carefully before using the GiveBest Ceramic Heater:

  • Risk of electric shock. Do not open the heater or remove its cover. No user-serviceable parts inside. Refer all servicing to qualified service personnel.
  • Do not expose the heater to rain or moisture to prevent fire or shock hazard.
  • Use the heater under the supervision of an adult due to its long cord that can cause injury if tripped on or pulled on.
  • Keep combustible materials at least 3 feet away from the front, sides, and rear of the heater.
  • Never leave the heater operating unattended, especially when used by or near children or invalids.
  • Unplug the heater when not in use and do not operate it with a damaged cord or plug.
  • Do not allow children to play with the heater and do not use it outdoors.
  • Do not insert foreign objects into the ventilation or exhaust openings of the heater.
  • Never block the air intakes or exhausts of the heater and do not use it on soft surfaces like a bed.
  • Do not use the heater in areas where gasoline, paint, or flammable liquids are used or stored.
  • Use the heater only as described in the manual to prevent fire, electric shock, or injury to persons.
  • Always plug the heater directly into a wall outlet/receptacle and never use an extension cord or power tap.
  • Do not tamper with or modify the heater. This can result in serious injury, death, or fire.
  • The heater is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised or instructed by a person responsible for their safety.

Product Usage Instructions

To use the GiveBest Ceramic Heater, follow these simple steps:

  1. Place the heater on a flat and stable surface that is at least 3 feet away from any combustible materials like furniture, bedding, or curtains.
  2. Plug the heater directly into a wall outlet/receptacle.
  3. Turn on the heater using the control panel or remote control (if included).
  4. Adjust the temperature and fan speed settings to your desired level of warmth and comfort.
  5. When not in use, turn off the heater and unplug it from the wall outlet/receptacle.

Remember to observe all safety instructions and precautions while using the GiveBest Ceramic Heater to prevent fire, electric shock, or injury to persons.

 SAFETY INSTRUCTIONS

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD This unit has a long cord that can be easily tripped on or pulled on, causing injury. Please make sure it is arranged so that it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped over accidentally.
WARNING: READ AND SAVE THESE OPERATING AND SAFTY
INSTRUCTIONS BEFORE USING THIS HEATER. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFTY INFORMATION.
WARNING: FAILURE TO FOLLOW ANY OF THESE SAFETY INSTRUCTIONS
COULD RESULT IN FIRE, INJURY OR DEATH.

YOUR RESPONSIBILITIES
Electrical appliances may expose people to hazards that can cause severe injury as well as death. The use of electrical products may create hazards that include, but are not limited to, injury, fire, electrical shock and electrical system damage. These instructions are intended to provide you with the information you need to use the product and to avoid such hazards.
When using electrical appliances, basic precautions should always be followed to reduce risk of fire, electric shock, and injury to persons including the following:

  • Read all instructions before using this heater.
  • This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces, use handles when moving this heater.
  • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
  • Extreme caution is necessary when any heater is used by or near children or invalids, and whenever the heater is left operating and unattended.
  • Always unplug heater when not in use.
  • Do not operate any heater with a damaged cord or plug or after the heater malfunctions or has been dropped or damaged in any manner Return heater to manufacturer has been dropped or damaged in any manner. Discard heater or return heater to authorized service facility for examination and/or repair.
  • For residential use only.
  • Do not use outdoors.
  • This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
  • Do not run cord under carpeting. Do not cover cord with rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
  • Children should be supervised to ensure that they do not play with the appliance. Do not use in outdoors.
  • It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
  • To disconnect the heater, first turn off the product, then grip the plug body and pull it from the wall outlet. Never pull by the cord.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater.
  • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
  • A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
  • Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
  • Always plug heater directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
  • Never tamper with this product or attempt to fix it. Any tampering with, or modification of this heater can result in serious injury, death, or fire. Risk of electric shock. Do not open. No user serviceable parts inside.
  • This heater is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) away from any combustible materials. DO NOT use on an unstable surface such as bedding or deep carpeting. Be sure the heater is not in a position where it may be tripped over by small children or pets. The heater’s rubber feet will hold it firmly in position.
  • If your home has aluminum wiring have a licensed electrician check your receptacle’s connections. When using a 1500-watt heater, aluminum wire connections can cause a safety issue.
  • Before cleaning, or storage, or when not in use, turn the product’s controls to the OFF position and unplug the heater from the electrical outlet and allow to cool.

PRODUCT OVERVIEW

  1. Power Indicator
  2. Recoverable Temperature Senser
  3. Heating Output Area
  4. Tip-over Switch
  5. Handle
  6. Fan and Ventilation Area
  7. AC Power Cord
  8. Manual Temperature Control Knob
  9. Power/Mode Setting Knob

OPERATIONS

  1. Read the user manual carefully and keep it for future reference.

  2. Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) away from any wall or any combustible material.

  3. Make sure the Power/Mode Setting Knob pointing to the “OFF” position before plugging the heater into the outlet.

  4. Plug into a polarized120V~ outlet. BE SURE THAT THE PLUG FITS TIGHTLY INTO OUTLET.
    When the plug fits loosely into receptacles, it may slip partially or completely out of the receptacle with only the slight movement of the attached cord. Receptacles in this condition may overheat and poses a serious fire hazard; if covered by a curtain or drape, the fire hazard is even greater.

  5. Turn the Manual Temperature Control Knob fully clockwise to the “+” position(highest setting) for assuring the three modes settings activated.
    NOTES: When reaching a certain comfortable temperature, slowly turn the Manual Temperature Control Knob counter-clockwise until a “click” sound heard(about half-round of the knob circle), at this time the unit will not be cut off when meeting overheat, and the unit will not be turned on automatically after cooling down. So keep the knob on the position of the latter half-round of the knob circle, if set it to front half-round knob circle, modes setting also can not be used. If setting to “-” position, the unit will be turned off.

  6. Select the proper setting to accommodate your comfort level with the Power Knob. The Power/Mode Setting Knob is equipped with three(3) mode settings, “I” (750W), “II” (1500W) and FAN( Natural Wind) . You can select the proper setting to accommodate your comfort level with this Knob.

  7. After heating, turn Power/Mode Setting Knob to “FAN” position to cool down the heater, then turn to “OFF” position and unplug the heater.

OVERHEAT PROTECTION

  1. A thermal overload protector is built in at the top of the heating panel, if the heater is obstructed or blocked at front panel and rear ventilation panel by the curtain, drape or cotton sheet etc., the thermal overload protector activates to prevent overheat.
  2. When the internal temperature of the heater reaches up to 70 Celsius which may cause fire hazard, the heater will be shut off automatically. It can ONLY resume operation when the user resets the unit.

To Reset Heater:

  1. Unplug the heater and wait about 15 minutes until the heater cooling down.
  2. After the heater has cooled down, plug the unit into a 110-120V electrical outlet again and follow the operation instructions described in this manual.

TRIP-OVER PROTECTION

A tip-over switch is placed at the bottom of the heater, when the heater is taken away or knocked over by pets or human, the heater will be shut off automatically to prevent burning combustible materials.

MAINTENANCE

Daily Maintenance:

  • Before cleaning, turn OFF the heater and unplug from the electrical outlet and wait it to cool down.
  • Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor and heating panel.
  • Do not immerse the heater in water.
  • Never use gasoline, benzene or thinner. This will damage the surface of the heater.
  • After cleaning, be sure to completely dry the unit with a cloth or towel.

Storage Maintenance:

  • Store heater in a cool and dry location with power cord properly secured.
    Please store the heater in its original carton or suitable container.

FAQ

Q: What should I do if I have questions about this heater?
A: Please feel free to contact us by the contact info at the end of this manual.

Q: Are there any overheating protection measures?
A: Yes. Thermal overload protector is built in this heater. If the heater is overheated, it will automatically shut off, it’s a safety protection. When this situation happened, pull out the plug for 15-30 minutes and plug in again to restart the heater thermal overload protector.

Q: If the heater is tripped over, will it automatically be shut down?
A: Yes. There is a tip-over switch at the bottom of the heater, when the heater has been lifted and leaves from its position or is tripped over, it will be automatically shut off.

Q: Why sometimes the heater suddenly shut off and even the power indicator went out?
A: In this situation, please refer to the “TRIP-OVER PROTECTION ” and OVERHEAT PROTECTION” parts.

SPECIFICATIONS

Model PTC-905
Voltage AC 120V~
Heating coverage 200 sq.Ft
Weight 3.65 pounds
Dimension L(7.9″) W(6.1″) H(10.2″)
Material ABS+PA+Metal

ONE YEAR LIMITED WARRANTY

You should first read all instructions before attempting to use this product.

  • This 1 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
    This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.

  • This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.

  • Please be sure to specify a model number and order ID.

NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER SERVICE FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE HEATER TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.
For customer service and warranty, contact us here

Brand family: Brightown, Givebest

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals