beper P304BAR003 Rechargeable 3 Blade Men Shaver Instructions
- June 3, 2024
- beper
Table of Contents
P304BAR003 Rechargeable 3 Blade Men Shaver
Instructions
P304BAR003 Rechargeable 3 Blade Men Shaver
RECHARGEABLE 3 BLADE SHAVER
For further information and/or for instructions for use in other languages,
please visit: beper.com
Cod.: P304BAR003
Precautions
Read the following instructions carefully, since they give you useful safety
information about installation, use and maintenance and help you avoid mishaps
and possible accidents.
Remove the packing and make sure that the appliance is intact, with special
attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be
accessible to the children, in order to preserve them from danger sources. It
is recommended not to throw these packing material in the domestic waste, but
to deliver them to the appropriate station of collection or destruction
refusals, asking eventually information to he manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label.
The appliance can be damaged if the voltage is not correct. If the plug does
not suit the socket, let it be replaced with another suitable plug by
qualified personnel only, which shall also ensure that the section of the
socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not
recommended; should they be necessary, please use only simple or multiple
adaptors and extensions in compliance with the safety rules in force, making
sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not
exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case,
switch it off and do not break it open. Refer to an authorized Beper after-
sale service for repair and require original spare parts only. Failing to
follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is
to be considered as improper and thus dangerous. The manufacturer cannot be
responsible for any damages deriving from improper, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of
the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or
burning flames.
Do not allow children, disabled people or every people without experience
or technical ability to use the appliance if they are not properly watched
over.
Close supervision is necessary when any appliance used by or near
children.
Description of product Fig.A
- Shaving head
- ON/OFF key
- Operation/charging LED light
- Blade cover
- USB cable
- USB adapter
- Cleaning brush
Warnings
Carefully read the instructions found in this manual before using the
appliance.
Do not attempt to repair or tamper with the device and/or the charging cable
provided; contact after sales service indicated in this manual.
Use only the USB cable provided with the appliance; the use of different cable
can cause damage to the appliance and its battery.
Keep charging cable and adapter away from humidity and water sources.
Disconnect the appliance from the power supply before cleaning it under tap
water.
This appliance cannot be used by children, or by individuals with reduced
physical, sensitive or mental capabilities, or with lack of experience and
knowledge, without supervision or in case they have not been given
instructions and warnings on the correct use of the appliance and the risks
involved.
Keep the appliance and its adapter away from children.
Make sure to always protect the blades by placing the blade cover on the
shaving head when the appliance is not in use.
Charging
It is better to fully charge the appliance before first use.
Make sure the appliance is switched off before proceeding with charging.
Insert the USB cable inside the connector found at the base of the appliance,
and connect it to the provided USB adapter; then connect the adapter to a wall
socket.
It is also possible to connect the USB cable directly to a charging device,
such as PC, laptop, power bank, etc.
Once the appliance is connected, the LED indicator light will turn red, and it
will turn green once battery is fully charged (after approx. 6 hours)
Important: do not charge the appliance for more than 8-10 hours, to
avoid damaging the battery.
When battery is fully charged, disconnect the appliance from the wall socket
and remove the cable from the appliance.
Use
Press ON/OFF button to make the appliance work.
Place the shaver head on your face, and proceed with shaving with quick and
precise movements (for optimal shaving, it’s preferable to first move on
straight lines, and then in circles). Make sure not to exercise excessive
pressure, to avoid rashes. Press the ON/OFF button to turn the appliance off.
When done using, remove shaving residues from appliance as indicated in the
paragraph “Cleaning and maintenance”, and cover the shaver head with the blade
cover, to preserve its quality.
Cleaning and maintenance
To always ensure optimal shaving, the appliance must be cleaned regularly.
After each use, it’s preferable to wash the shaver head under warm running
water.
Before cleaning, make sure that the appliance is unplugged from wall socket,
and that the USB cable is not inserted.
Open the shaver head by gently lifting each blade up, using the slots found on
the sides of the blades.
Let the appliance dry thoroughly. Fig. B
Warning: do not use cloth or paper towels to clean the appliance, as these
may damage the blades.
As an alternative to washing, it’s possible to use the cleaning brush provided
with the appliance to remove the shaving residues from the shaver head.
When done cleaning, store the appliance inside its box, away from dirt, dust
and humidity.
It’s advisable to replace the shaver head once a year, based on the usage
frequency. Replace the shaver head only with original spare parts: contact
local retailer for purchase. To replace the shaver head, remove it from the
appliance by pulling it upwards; insert the new shaver head inside the hole on
the appliance, by pressing downwards until firmly fixed (a click will be heard
when the shaver head is correctly inserted). Fig. C.
Technical data
600mA Ni-Mh battery
Adapter: 100-240V 50/60 Hz 0.2A
Output 5V 1A
For any improvement reasons, Beper reserves the right to modify or improve
the product without any prior notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be disposed
of in the normal unsorted municipal waste stream. Old appliances must be
collected separately in order to optimize the recovery and recycling of the
materials they contain, and reduce the impact on human health and the
environment. The crossed out “wheeled bin” symbol on the product reminds you
of your obligation, that when you dispose of the appliance, it must be
separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee applies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of
purchase (fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the appliance’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
– The appliance has been used properly and for the purpose for which it has
been intended.
– The appliance has not been tampered with, otherwise it is not maintainable.
– The purchase receipt shall be presented.
– The appliance showing a fair wear and tear shall not be covered by this
guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge. In any case, if the part to be
replaced for defect, breakage or malfunction is an accessory and/or a
detachable part of the product, Beper reserves the right to replace only the
very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail [email protected] which will forward
your enquiries to your distributor.
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674
Fax 045/6984019
beper.com
CUSTOMER CARE BEPERhttp://customercare.beper.com/support/home