EMEET M2 Max Professional Conference Speaker User Guide

EMEET M2 Max Professional Conference Speaker

Buttons

Overview

1. Voice IA button

2. Bluetooth button

3. Answer/End Phone
   Call button

4. Volume＋ button

5. Volume－ button

6. Mute button

7. Power button

8. Status LED

9. Source LED

10. Rubber plug

11. LOCK port

12. Headset output port

13. LINK Daisy Chain port

14. USB port (Type C)

15. Dongle

16. Nameplate

17. MIC hole

**Power On/Off

Check battery level

**

**Low battery warning

**

VoiceIA Button

Short press “ ”AI Noise Reduction button to enable/disable AI noise function.
Turning on Voice IA noise reduction can greatly reduce some noises in the meeting scene, such as from keyboard tapping, air conditioning noise, and general unwanted background noise.

Note: After the noise reduction mode is enabled, in order to maintain good sound pickup effect, please make a call within a sound pickup range of 1.5 m(4.9ft).

MIC Mute Button

Answer/End Phone Call Button

Status

| Action|

Status

---|---|---
Incoming call| Press| Answer a call
Incoming call| Press and hold| Reject a call
Call going| Press/press and hold| End a call

Volume＋/Volume－ Button

Action

| Status|

LED

---|---|---
Press| Volume up| Status LED turns blue
Press| Volume down| Status LED turns blue

Bluetooth Connection

Action

| Status| Source LED|

LED

---|---|---|---
Press and hold
Enter Bluetooth pairing mode| Bluetooth paired| Steady blue|
Bluetooth not paired| Flashes blue|
Press| Bluetooth closed/reconnected| Steady white|

Notes :
a) When turning on the device, it will reconnect to the last computer/mobile phone via Bluetooth whilst it is active.
b) Bluetooth closed means it can not be found.

**USB Connection

**

USB Dongle Connection

Dongle status

| Dongle LED|

LED

---|---|---
Pairing| Flashes blue|
Pairing successful| Steady blue|
Call going| Green|
Microphone muted| Steady red|

Headset Connection

Note: When the headset is connected, the speaker is automatically muted.

Daisy Chain Cable

Note: emit Daisy Chain cables must be purchased separately.

Lock Port Setting

Note: The LOCK port is of a Kensington type which requires the user to buy a lock otherwise.

Charging

Action

| Source LED|

LED

---|---|---
Charging in power-off state| Yellow-green LED indicator flashing|
Fully charged in power-off state| Yellow-green LED indicator always on|

Download Application

Download the emeet Link PC desktop app for software updates

Product Parameters

Note: In case of any change in the specifications, official website information shall prevail.

References

• emeet.ai/emeetlink

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>