kogan NBOTLTSLP2A Solar Powered Motion Sensor 2 in 1 Portable LED Light User Manual
- June 6, 2024
- Kogan
Table of Contents
kogan NBOTLTSLP2A Solar Powered Motion Sensor 2 in 1 Portable LED Light
User Manual
SAFETY & WARNINGS
- Read these instructions thoroughly before use.
- Please note, the solar light is designed to work when the lighting gets dark. The selected location should not be near a light source such as a porch light or streetlight, as these might keep the solar lights from automatically turning on.
- Although the battery has been charged by the manufacturer, the charge may have dropped by the time the consumer receives the product. Please let the solar light charge for a full day for the maximum performance.
- The surface of the solar panel must be kept clean. Dusty surfaces will reduce charging efficiency.
- Some components of this product are not replaceable. If the part is damaged, the whole product must be disposed of. Do not disassemble and attempt to repair.
- Keep away from fire.
- Always keep the solar panel facing upwards.
- Do not immerse in water or other liquids.
- Ensure the chosen location of the light receives plenty of sunlight or it may require a longer charging time.
- Do not use the light in the temperatures above 45°C or below 0°C. Doing so may affect battery life and normal use.
OVERVIEW
- Solar panel
- Indicator
- Power button
- LED panel
- Motion sensor
INSTALLATION
Step 1:
- Select a suitable location that receives a lot of sunlight to ensure the solar panel can charge the built-in Li-ion battery effectively.
- Remove the LED panel
Step 2:
- Using the appropriate mounting hardware for your surface and x2 screws 28mm vertically apart, mount the solar panel.
- Replace the LED panel.
OPERATION
Press and hold the Power button to turn the light on and off.
Wall Light Mode:
Press the power button to cycle through the lighting modes.
- Mode 1 (Red): 50lm with motion sensor
- Mode 2 (Green): no lighting, motion sensor off
- Mode 3 (Orange): 200lm with 6 Hour timer
Portable Mode:
Press the power button to cycle through the lighting modes.
- Mode 1: 100lm
- Mode 2: 200lm
Battery capacity indicator:
- Green: >70%
- Orange: 30%-70%
- Red: <30%
SPECIFICATIONS
Solar panel
Monocrystalline
Battery
Li-ion battery
Material
Polycarbonate
Working temperature
0°C – 45°C
Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>