Pondo WBNSQ 24 Inch Square Garden Water Bowl Instructions
- May 15, 2024
- Pondo
Table of Contents
Pondo WBNSQ 24 Inch Square Garden Water Bowl
The endless elegance and simple styling of the Spardia stainless steel water
bowl makes it the perfect addition to your pool or
fountain. Sized to fit well into smaller and larger landscapes, this square
brown finished water bowl provides an upscale appearance to almost all
architectural styles from traditional to modern. The soft brown patina finish
over the powder coating is rustic,
while the shaping of the bowl is modern in design. Often seen in multiples,
don’t miss out on the opportunity to take your landscape’s appeal over the
top!
Manufactured to our specifications from stainless steel 304 material, the Spardia stainless steel water and planter bowl is engineered to last the test of time. The stainless steel encapsulated within the bowl has a slight downward angle, keeping water from running and dripping back onto the bowl.
DIMENSION
Features
- Solana 24″ Square Water & Planter Bowl
- Stainless steel appearance with brown patina coating
- Internal baffles smooth turbulence and promote sheeting of water overspill edge
- Flow Rate: 450 GPH – 1150 GPH
- Bonding/Grounding Lug Attached to Product
- Inlet 1.2″ left of left below the bowl
- Dimensions: 24″ W x 24″ D x 10.5″ H
- Finish: Anqitue Brown (Available in Stainless Steel or Powder Coat Colors)
GENERAL INFORMATION
- Please carefully follow the instructions in this manual to prevent personal injury or property loss. Instructions are updated as needed.
- It is the installer’s responsibility to periodically review instructions for applicable updates.
- The steps listed as
- WARNING: Contains information critical to the safe installation and operation of the fire bowl.
- WARNING: It is the installer’s responsibility to ensure a safe installation and to educate the end user as to proper operation. Leave this manual with the end user.
- WARNING: Never alter product or configuration in any way.
- WARNING: Verify correct water pressure and water requirements
- WATER REQUIREMENTS FOR WATER SPILLWAY: 12-lS GPM
ITEMS INCLUDED WITH YOUR PLANTER BOWL
- Planter Bowl
- 1.2″ PVC Pipe Fitting.
ITEMS NEEDED
- Water pump
- l .2″ PVC Pipe OR Flexible PVC
INSTALLATION OF THE BOWL
SELECTING THE LOCATION
- Select a location with good drainage.
- Choose a location that allows easy access for installation and maintenance of the planter & water bowl.
- Select a location where that is away from pedestrian traffic to prevent anyone from bumping into it.
- Select a location that has a level surface
INSTALLING THE BOWL
- The bowl is free-standing
- Mounting with concrete anchors or adhesive is recommended but optional.
No.1 : Always prior choice install on the side along the pool
CONNECTING YOUR WATER SUPPLY
- The spillway has a 1.2″ Inlet.
- You may use PVC pipe, Flex PC pipe, or stainless steel water line.
- To position the scupper in place, use the flexible tabs on the underside of the scupper to support it.
- Make sure the scupper is level for a superior water spill.
You may use a clear epoxy or silicone adhesive to secure the scupper in place. Let cure before inserting soil
STONE
- Place the stone on the very top of the tray.The tray is prepared bear stone materials to be fully loaded as much as you want to be compatible with the desired looks.
- Clean the stone before place on the tray if you can, it helps the water of the whole system clean and avoids clogging
No.2: Install as garden element requires an inground water basin.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>