CMA DISHMACHINE 181GW 1 Undercounter Glasswasher Instructions
- September 27, 2024
- CMA DISHMACHINE
Table of Contents
181GW
Quick Setup Instructions
Undercounter Glasswasher
WARNING : Electrical and plumbing connections need to be made by a qualified service person who will comply with all available Federal, State and Local Health, Electrical,Plumbing and Safety codes.
Connect the drain hose to floor drain. The floor drain must have a 1 inch air gap between drain hose and floor drain.
Connect dishmachine to hot water source 120°F – 140°F. Minimum temperature will remain in wash cycle until booster heater temperature reaches 180°F, then it will advance into rinse cycle. Insert tube stiffener with chemical tubing into corresponding chemical dispensers.
If necessary adjust the temperature by turning the adjustment stem clockwise
to increase. After filling dishwasher for the first time, (CAUTION: turn power
supply off) reconnect the factory unplugged wire to booster high-limit switch
located behind front panel. Level dishmachine by adjusting leveling legs.
Dishmachine must be level front and back.
an Ali Group Company
The Spirit of Excellence
Documents / Resources
| CMA
DISHMACHINE 181GW 1 Undercounter
Glasswasher
[pdf] Instructions
181GW 1, 181GW 2, 181GW 3, 181GW 4, 181GW 1 Undercounter Glasswasher, 181GW 1,
Undercounter Glasswasher, Glasswasher
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>