kogan NBOTLTFLBPA Battery Powerd Outdoor Motion Sensor Dual LED Flood Light User Guide
- June 6, 2024
- Kogan
Table of Contents
USER GUIDE
BATTERY-POWERED OUTDOOR MOTION SENSOR DUAL LED FLOOD LIGHT
NBOTLTFLBPA
COMPONENTS
OVERVIEW
- Lamp
- Motion sensor
- Mounting plate
- Battery compartment
- On/Off switch
INSTALLATION
Step 1:
Place the mounting plate up against your wall and mark the screw positions.
Step 2:
- Using a drill, drill out the two holes for the screws.
- Insert the supplied wall plugs into the holes.
Step 3: Secure the mounting plate in place using the supplied screws.
Step 4:
- Remove the battery compartment cover and install x3 1.5V C batteries (not included) into the battery compartment. Ensure the polarity of the batteries is correct.
- Turn the On/Off switch to the on position.
- The lamps will illuminate for 15 seconds when motion is detected.
Step 5:
Align the two holes on the rear of the floodlight with the clips on the
mounting plate and attach the floodlight to the mounting plate until it snaps
firmly into position.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
setup.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>