SYNCO Mic-M1S Microphone User Manual

SYNCO Mic-M1S Microphone User Manual

Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your SYNCO Product

• Please keep the product in a dry, clean, dust-free environment.
• Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
• Use only a soft and dry cloth for cleaning the product.
• Malfunction may be caused by dropping, impact of external force.
• Do not attempt to disassemble the product. Doing so voids warranty.
• Please have the product checked or repaired by authorized technicians if any malfunctions happened.
• Failure to follow all the instructions may result in mechanics damage.
• Warranty does not apply to human errors.

Operations

1. Insert the microphone body into the shock mount. Make sure it is secure and well-balanced.

2. Install the windshield to the front of the microphone body.

3. Connect the microphone with your device via corresponding output cable.
   For camera series (camera, camcorder, audio recorder, and other audio/ video recording devices)

   • For phone series (smartphone, tablet, Mac)
     
     ① Attach the shock mount to the camera via the cold shoe.
     ② Connect the microphone with the device via the 3.5mm TRS camera cable.

   • For phone series (smartphone, tablet, Mac)
     
     ① Attach the shock mount to smartphone holder (exclusive) via the cold shoe or thread.
     ② Connect the microphone with the device via the 3.5mm TRRS phone cable.

4. Open the audio or video recording application on your device and begin recording.

Camera Settings

As a plug-and-play microphone, M1S requires built-in power through the microphone input of your camera. For the best performance, please set the audio input of your camera as below.
Audio Input: Microphone Input
Audio Level/Gain Control: Manual (if possible)
Plug-in Power: Power On
Refer to the instructions provided with your camera for setup on audio settings.

Specifications

1. Polar Pattern: Cardioid
   

2. Performance Parameter
   Transducer| Condenser
   ---|---
   Polar Pattern| Cardioid
   Frequency Response| 100Hz-20KHz/ ±3dB
   Signal/Noise| ＞60dB
   Max. SPL| 130dB@1KHz, 1%THD
   Sensitivity| -35dB re 1 Volt/pasal(18.00mV@94dB SPL ) +1/-2dB@1KHz
   Power Requirement| Plug-in Power
   Connector| 3.5mm TRS/3.5mm TRRS
   Dimensions| Φ21.5x 72mm
   Net Weight| 35g

Warranty

Warranty Period
Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
   The warranty period begins on the date of purchase of brand new, unused products by the first end-user.
   Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

• Faults resulted from inappropriate use of a product without following its operation specification
• Artificial damage, e.g. crash, squeeze, scratch, or soaking
• Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
• The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
• All consumable accessory attached to a product, like cable, wind muff, battery
• Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

• If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at support@syncoaudio.com.
• Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
• If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcomed to contact us via Email：support@syncoaudio.com

USER INFORMATION| Customer Name:
Phone Number:
Email
Address:
SALES INFORMATION| Sales Date:
Model:
Product Code:
Dealer:
REPAIR RECORD| Service Date:
Technician:
Issue:

RESULT     Solved      Unsolved        Returned(Replaced)

References

• SYNCO | Branded Microphone Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>