logitech 981-001166 Zone Vibe 100 Installation Guide

: September 27, 2024
: Logitech

Table of Contents

981-001166 Zone Vibe 100
Specifications
Product Usage Instructions
Power On / Off
Adjusting Headphones
Headphones Controls
Charging
- FAQ
Q: How do I mute the microphone?

981-001166 Zone Vibe 100

Specifications

Dimensions:
- Headphones: Height x Width x Depth: 183.03 x 169.68 x 73
  mm
- Weight: 0.185 Kg
- Earpad: Height x Width x Depth: 98.6 x 75.44 x 19.3 mm

Product Usage Instructions

Power On / Off

Slide the switch in the arrow’s direction to the middle to
power on the headphones.
Once powered on, the LED light will slightly turn white.
There will be a voice prompt that tells you the battery
status.

Adjusting Headphones

Adjust the headphones by sliding earcups up and down the
extended part of the headband.
Slide the earcups up and down the headband until they sit
comfortably on your ears.

Headphones Controls

Usage	Controls	Action
Call controls	Answer / End call, Reject call	Short press, 2 sec press, Short

Charging

To conserve battery life, headphones automatically power off
after 30 minutes without usage.
The LED light on the headphones will blink slowly in RED when
the battery is low.
Charging via USB cable:
Plug one end of the cable to the USB-C port on the bottom of
the earcup and the other end into the USB-C charging port on your
computer.
The LED light will start breathing white when charging.

FAQ

Q: How do I mute the microphone?

A: There are 2 ways to mute your microphone. You can either
press the Mute button or flip up or down the mic boom to mute or
unmute.

KNOW YOUR PRODUCT Front view:
Back view:
Call button (answer / end / reject calls)
Volume up / down

Microphone boom
Music control button (play/ pause/ next track)
3English

Bottom view:
3-position switch (power / Bluetooth®
pairing)
Mute button

USB-C port LED light
4English

BOX CONTENT 1 Zone Vibe 100 wireless headphones 2 Charging cable 3 Travel bag 4 User documentation

USB-C USB-C

POWER ON / OFF

1

1 Slide the switch in the arrow’s direction to the middle to power on the headphones

2
2 Once powered on, the LED light will slightly turn white
3 There will be a voice prompt that tells you the battery status

5English

CONNECT YOUR HEADPHONES Connect via BLUETOOTH®
1 Slide the switch to the bottom in the arrow’s direction for 2 seconds to initiate pairing
2 The LED light will flash white rapidly 3 Open Bluetooth® settings on your device 4 Select Logi Zone Vibe 100 in discoverable devices 5 Once successfully paired, the LED light will turn
solid white

2 sec.

ADJUSTING HEADPHONES
1 Adjust the headphones by sliding earcups up and down the extended part of the headband
2 It may be easier to adjust the headphones on your head Slide the earcups up and down the headband until they sit comfortably on your ears

LOGI Zone Vibe 100

6English

HEADPHONES CONTROLS

For UC controls:

Usage

Call controls

Answer / End call Reject call

Music controls

Play / Pause Track forward

Volume

Volume up Volume down

Connectivity

Bluetooth® pairing

Button Call button
Music control button “+” “-”
Power button

Action Short press 2 sec press Short press Double press
Short press
2 sec press

Note: – Media control functionality depends on the type of application – Call activities are always the first priority When two Bluetooth® devices are connected,
the last active device will override the other
Tip: Music EQ controls available on Logi Tune

MUTE There are 2 ways to mute your microphone

L

Mute Press the button to mute

Flip up or down the mic boom to mute or unmute

L
“Mute on” “Mute off”
Voice notifications indicate when the microphone is on /
off mute

7English

HEADPHONES LIGHT INDICATOR
Category

White

Power Connectivity

Calls
Calls Red
Power

Status Power ON Battery charging Battery fully charged Bluetooth® pairing Bluetooth® connected Active call Incoming call
Mute Low battery (< 10%)
Factory reset

Light Turn solid white and then dim
Breathing Solid and then off
Fast blinking Turn solid white and then dim
Solid Slow blinking
Solid Slow blinking Fast blink from red to white for three times then LED turn off

Note: – User-triggered behaviors, such as Bluetooth® pairing, will be prioritized then revert back to its previous status once the
behavior is completed

CHARGING
To conserve battery life, headphones automatically power off after 30 minutes without usage.
Sleep timer could be adjusted in Logi Tune.
The LED light on the headphones will blink slowly in RED when the battery is low.

Charging via USB cable
1 Plug one end of the cable to the USB-C port on the bottom of the earcup and the other end into the USB-C charging port on your computer
2 The LED light will start breathing white when charging
3 The LED light will turn solid white when fully charged 2 hours will fully charge the battery 5 minutes will give you 1 hour of playback
4 The headphones can be used with Bluetooth® paired while charging

8English

LOGI TUNE Logi Tune helps boost your headphones performance with periodic software and firmware updates It is recommended to update your headphones To do so, download Logi Tune from www logitech com/tune
ADJUSTING SIDETONE Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking In Logi Tune, select the sidetone feature, and adjust the dial accordingly A higher number means you hear more
external sound A lower number means you hear less
external sound
AUTO SLEEP TIMER By default, your headphones will automatically power off when not in use for 30 minutes Adjust the sleep timer in Logi Tune To wake up your headphones, try sliding off/on the power switch again
RESET YOUR HEADPHONES 1 Power the headphones on 2 Press and hold the call button and volume ‘’
button for 5 seconds 3 The LED light will quickly blink from red
to white for 3 times and then turns off when your headphones are successfully reset 4 The headphones will turn off after reset

Logi Tune
www.logitech.com/tune

9English

DIMENSIONS
Headphones: Height x Width x Depth: 183 03 x 169 68 x 73 mm Weight: 0 185 Kg Earpad: Height x Width x Depth: 98 6 x 75 44 x 19 3 mm
SYSTEM REQUIREMENTS
Works with common calling applications across almost all platforms and operating systems Works with Windows, Mac, or Chrome-based computers via Bluetooth® and iOS or Android Bluetooth-enabled devices
TECHNICAL SPECIFICATIONS
Microphone Type: Dual omni-directional MEMS mics with directional beamforming and DSP Frequency response (Speaker): 20-20kHz (music mode), 100-8kHz (talk mode) Frequency response (Microphone): 100-8kHz Talk time up to 18 hrs Listen time up to 20 hrs Bluetooth® version: 5 2 Wireless range: Up to 30 m / 100 ft (open field line of sight) Cable length (USB-C charging cable): 4 9 ft (1 5 m)
www.logitech.com/support/zonevibe100
© 2022 Logitech Logitech, Logi and the Logitech logo are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by Logitech is under license Windows, Mac, Chrome, iOS, Android and other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice

PRÉSENTATION DU PRODUIT Vue avant:
Vue arrière:
Bouton d’appel (répondre/terminer/
rejeter les appels) Volume +/-

Tige de micro
Bouton de contrôle de la musique (lecture/ pause/piste suivante)
11Français