Haier HTF-610DB7 Refrigerator Freezer User Manual

: June 17, 2024
: Haier

Haier HTF-610DB7 Refrigerator Freezer

Product Information

Specifications
- Product Name: Unknown
- Model Number: Unknown
- Manufacturer: Unknown
- Power Supply: Unknown

Product Usage Instructions

Safety Precautions
- Before using the product, please take note of the following safety precautions:
- Take care to avoid causing a fire by igniting flammable material.
- When positioning the appliance, ensure the supply cord is not trapped or damaged.
- Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
Installation
- Follow these steps to install the product:
- Step 1: [Installation Step 1]
- Step 2: [Installation Step 2]
- Step 3: [Installation Step 3]
Operation
- To operate the product, please follow these instructions:
- Step 1: [Operation Step 1]
- Step 2: [Operation Step 2]
- Step 3: [Operation Step 3]
Maintenance
- To ensure proper functioning and longevity of the product, regular maintenance is required. Follow these guidelines:
- Clean the product regularly using a soft cloth and mild detergent.
- Inspect the product for any signs of damage or wear and tear.
- Refer to the user manual for any specific maintenance instructions.
Troubleshooting
- If you encounter any issues with the product, refer to the troubleshooting section in the user manual or contact customer support for assistance.

FAQs

Q: What should I do if the product does not turn on?
- A: Check if the power supply is connected properly and if there is power. If the issue persists, refer to the troubleshooting section in the user manual or contact customer support.
Q: Can I use the product outdoors?
- A: The product is not designed for outdoor use. It is recommended to use it in a dry and well-ventilated indoor area.
Q: How often should I clean the product?
- A: It is recommended to clean the product regularly, at least once a month, or as needed depending on usage.

Infomation

Thank You
Thank you for purchasing a Haier Product.

Please read these instructions carefully before using this appliance. The instructions con- tain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass this manual so that the new owner can become familiar with the appliance and safety warnings.

Legend

Warning – Important Safety information
General information and tips
Environmental information

Disposal

Help protect the environment and human health.
Put the packaging in applicable containers to recycle it.
Help to recycle waste of electrical and electronic ap- pliances.
Do not dispose appliances marked with this symbol with the household waste.
Return the product to your local recycling facility or contact your municipal office.

WARNING!

Risk of injury or suffocation! Refrigerants and gases must be disposed of professionally. Ensure that the tubing of the refrigerant circuit is not damaged before being properly disposed of. Disconnect the appliance from the mains supply. Cut off the main cable and dispose of it. Remove the trays and drawers as well as the door catch and seals, to prevent children and pets to get closed in the appliance.

Accessories

Check the accessories and literature by this list:

WARNING! Before first use

Make sure there is no transport damage.
Remove all packaging and keep out of children’s reach.
Wait at least two hours before installing the appliance to ensure the refrigerant circuit is fully efficient.
Handle the appliance always with at least two persons because it is heavy.

Safety information

Before switching on the appliance for the first time read the fol- lowing safety hints!:

Installation

The appliance should be placed in a well-ventilated place. Ensure a space of at least 10 cm above and around the appliance.
Never place the appliance in a damp area or location where it might be splashed with water. Clean and dry water splashes and stains with a soft clean cloth.
Do not install the appliance in direct sunlight or in near of heat sources(e.g. stoves, heaters).
Install and level the appliance in an area suitable for its size and use.
Keep ventilation openings in the appliance or in the in-built structure clear of obstruction.
Make sure that the electrical information on the rating plate agrees with the power supply. If it does not, contact an electrician.
The appliance is operated by a 220-240 VAC/50 Hz power sup- ply.
Abnormal voltage fluctuation may cause the appliance to fail to start, or damage to the temperature control or compressor, or there may be an abnormal noise when operating. In such case, an automatic regulator shall be mounted.
Do not use multi-plug adapters and extension cables.
Ensure that the power cable is not trapped by the refrigerator. Do not step on the power cable.

WARNING!

Use a separate earthed socket for the power supply which is easy accessible. The appliance must be earthed.
Only for UK: The appliance’s power cable is fitted with 3-cord (grounding) plug that fits a standard 3-cord (grounded) socket. Never cut off or dismount the third pin (grounding). After the ap- pliance is installed, the plug should be accessible.
Do not damage the refrigerant circuit.

Daily use

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental ca- pabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Keep away children under 3 years of age from the appliance un- less they are constantly supervised
Children shall not play with the appliance.
If cool gas or other inflammable gas is leaking in the vicinity of the appliance, turn off the valve of the leaking gas, open the doors and windows and do not unplug a plug in the power cable of the refrigerator or any other appliance.
Notice that the appliance is set for operation at a specific am- bient range between 10 and 38°C. The appliance may not work properly if it is left for a long period at a temperature above or be- low the indicated range.
Do not place unstable articles (heavy objects, containers filled with water) on top of the refrigerator, to ovoid personal injury caused by falling or electric shock caused by contact with water.
Do not pull on the door shelves. The door may be pulled slant, the bottle rack, may be pulled away, or the appliance may topple.
Open and close the doors only with the handles. The gap between the doors and between the doors and the cabinet is very narrow.
Do not extend your hands in these areas to avoid pinching your fingers. Open or close the refrigerator doors only when there are no children standing within the range of door movement.

WARNING!

Do not store or use inflammable, explosive or corrosive materials in the appliance or in the vicinity.
Do not store medicines, bacteria or chemical agents in the ap- pliance. This appliance is a household appliance. It is not recom- mended to store materials that require strict temperatures.
Never store liquids in bottles or cans (besides high percentage spirits) especially carbonated beverages in the freezer, as these

Will burst during freezing

Check the condition of food if a warming in the freezer has taken place.
Do not set unnecessarily low temperature in the refrigerator compartment. Minus temperatures may occur at high settings.
- Attention: Bottles can burst
Do not touch frozen goods with wet hands (wear gloves). Espe- cially do not eat ice lollies immediately after removal from the freezer compartment. There is the risk to freeze or the formation of frost blisters. FIRST aid: keep immediately under running cold water. Do not pull away!
Do not touch the inside surface of the freezer storage compart- ment when in operation, especially with wet hands, as your hands may freeze onto the surface.
Unplug the appliance in the event of a power interruption or be- fore cleaning. Allow at least 5 minutes before restarting the appli- ance, as frequent starting may damage the compressor.
Do not use electrical devices inside the food storage compart- ments of the appliance, unless they are of the type recommend- ed by the manufacturer.

Maintenance/cleaning

Make sure children are supervised if they carry out cleaning and maintenance.
Disconnect the appliance from the electrical supply before un- undertaking any routine maintenance. Allow at least 5 minutes be- fore restarting the appliance, as frequent starting may damage the compressor.

WARNING!

Hold the plug, not the cable, when unplugging the appliance.
Do not clean the appliance with hard brushes, wire brushes, de- tergent powder, petrol, amyl acetate, acetone and similar organic solutions, acid or alkaline solutions. Please clean with special re- frigerator detergent to avoid damage.
Do not scrape off frost and ice with sharp objects. Do not use sprays, electric heaters like heater, hair dryer, steam cleaners or other sources of heat in order to avoid damage to the plastic parts.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the man- ufacturer.
If the supply cord is damaged, it must be replaced by the manu- facturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not try to repair, disassemble or modify the appliance by your- self. In case of repair please contact our customer service.
Eliminate the dust on the back of the unit at least once in the year to avoid hazard by fire, as well as increased energy consumption. Do not spray or flush the appliance during cleaning.
Do not use water spray or steam to clean the appliance. Do not clean the cold glass shelves with hot water. Sudden tem- perature change may cause the glass to break.

WARNING! Refrigerant gas

The appliance contains the flammable refrigerant ISOBUTANE (R600a).
Make sure the refrigerant circuit is not damaged during transportation or installation.
Leaking refrigerant may cause eye injuries or ignite. If a damage has occurred, keep away open fire sources, thoroughly ventilate the room, do not plug or unplug the power cords of the appliance or any other appliance.
Inform the customer service.
In case of eyes get into contact with the refrigerant, rinse immedi- ately it under running water and call immediately the eye specialist.
Taking care to avoid causing a fire by igniting flammable material.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

Intended use

This appliance is intended for cooling and freezing food.
It has been designed exclusively for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments as well as in bed-and-breakfast and catering business. It is not intended for commercial or industrial use.
Changes or modifications to the device are not allowed. Unintended use may cause haz- ards and loss of warranty claims.

Standards and directives

This product meets the requirements of all applicable EC directives with the correspond- ing harmonised standards, which provide for CE marking.

CAUTION!

When you close the door, the vertical door strip on the left door should be bent inside (1).
If you try to close the left door and the vertical door strip is unbent (2), you should bend it firstly, other- wise the door strip will hit the fixing shaft or right door.
Thus a damage to the door slip or a leak will occur.
There is a heating thread inside the frame. The tem- perature of the surface will rise a little, which is nor- mal and won’t affect the function of appliance.

Product description

Notice
Due to technical changes and different models, some of the illustrations in this manual may differ from your model.

A: Refrigerator compartment

Bottle holder/Door rack
Glass shelves
Rating plate
Humidity zone drawer
Door strip
Ceiling lamp
Backlamp
Dynamic ABT
Air duct and sensor (behind panel)
O.K.-temperature indicator (optional)
Air duct (behind drawers)
Dry zone drawer
B: Freezer compartment
Freezer compartment LED lamp
Ice maker with ice scoop
Lamp switch
Freezing tray
Air duct
Freezer storage drawer
C: My Zone compartment
My Zone compartment LED lamp
Lamp switch
Tray
Air duct
My Zone drawer
Adiustable feet

Control panel

Buttons:

A Fridge selector
B My Zone selector
C Freezer selector
D Fuzzy mode selector
E Holiday mode selector
F M- Sensor selector
G Panel lock selector

Indicators:

a1 Power cool function
a2 Temperature fridge
b Temperature My Zone compartment
c1 Power freeze function
c2 Temperature freezer
d Fuzzymode
e Holiday mode
f Motion mode
g Panel lock

Before first use

Remove all packaging materials, keep them out of children’s reach and dispose them in an environmentally friendly manner.
Clean the inside and outside of the appliance with water and a mild detergent before putting any food in it.
After the appliance has been levelled and cleaned, wait for at least 2-5 hours before connecting it to the power supply. See Section INSTALLATION.
Precool the compartments at high settings before loading with food.
The function Power- Freeze helps to cool down the freezer compartment quickly.
The refrigerator, freezer and My Zone compartment temperature are automatically set to 4° C, -18° C and -6° C respectively. These are the recommended settings.
If desired, you can change these temperatures manually. Please see ADJUST THE TEMPERATURE.

Use

Sensor keys
- The buttons on the control panel are sensor keys, which already respond when lightly touched with the finger.
Switch on /off the appliance
- The appliance is in operation as soon as it is connected to the power supply.
- When the appliance is powered on for the first time, the actual refrigerator and freezer temperatures are displaved. The display will flash. If the doors are closed it will switch off after 30 seconds.
- Maybe the panel lock is active.

Notice

The appliance is preset to the recommended temperature of 4°C (refrigerator).
18°C (freezer) and -6°C (My Zone compartment). Under normal ambient condition you need not to set a temperature.
When the appliance is switched on after disconnection from the main power supply, it may take up to 12 hours for the correct temperatures to be reached.
Empty the appliance before switching off. To switch off the appliance, pull the power cord out of the power socket.

Lock/unlock panel

Notice The control panel is automatically blocked against activation if the doors are closed and 30 seconds no button is pressed. For any settings the control panel must be unlocked.

Touch button “G” for 3 seconds to block all panel elements against activation.
The buzzer alarms and the related indicator “g” is now displayed; the lightening of the panel is switched off. The icon flashes if a button will be pressed, when the panel lock is activated. The change is not running.
For unlocking press again the button.

Standby-mode

The display screen turns off automatically 30 seconds after pressing a key.
The display will be automatically locked. It lights up automatically when pressing any key or opening any door (Alarm does not light up the display screen).

Select the working mode

You may need to select one of the following two ways to set the appliance:

Fuzzy mode
- Unding to teambien temperature and temperal change in the aratance you d- not have any special requirements. we recommend that you use Fuzzy mode (refer to FUZZY MODE later on).
Manual adjusting mode:
- If you want to manually adjust the temperature of the appliance in order to store a par- ticular food. you can set the temperature via a temperature adjusting button (refer to ADJUST THE TEMPERATURE).

Door opening alarm

When one of the doors is opened for more than 1 min- ute, the door opening alarm will sound.
The alarm can be silenced by either closing the door or touching the control panel.
If the door is left open for more than 7 minutes, the light inside the compartment and control panel illumination will automatically switch off.

Adjust the temperature

The indoor temperatures are influenced by the following factors:

Ambient temperature
Frequency of door opening
Amount of stored foods
Installation of the appliance

Adjust the temperature of the fridge

Unlock the panel by pressing the button “G” if it is locked.
Press button „A” (Fridge) to select the fridge compartment. An alarm sounds and indicator „a2″ is flashing. The actual temperature in the refrigerator compartment is displayed.
Press button “A” to set the fridge temperature. A signal will sound at each key press.
- The temperature increases in sequences of 1°C from a minimum of 1°C to a maximum of 9°C, The Theoptimumtemperatureintherefrigeratoris 4°C. Colder temperatures mean unnecessary energy consumption.
- If no key is operated in 5 sec., the setting confirms automatically.

Adjust the temperature for freezer

Unlock the panel by pressing button “G” if it is locked.
Press button “C” (Freezer) for select the freezer compartment. An alarm sounds and indicator “c2” is flashing. The actual temperature in the freezer compartment is displayed.
Press button “C” (Freezer) to set the freezer tem- perature. A signal will sound at each key press. The temperature increases in sequences of 1 °C from a minimum of -15 °C to a maximum of -24 °C. The optimum temperature in the freezer is -18 °C. Colder temperatures mean unnecessary energy consumption. If no key is operated in 5 sec., the setting confirms automatically.

Notice
The temperature in the corresponding compartment cannot be adjusted if any other function (Power-Freeze, Power-Cool, Holiday or Fuzzy mode) is activated or the display is locked. The corresponding indicator will flash accompanying with a buzzer.

Adjust the temperature for My Zone compart- ment

Unlock the panel by pressing button “G” if it is locked.
Press button “B” (My Zone) for select the My Zone compartment. An alarm sounds.
Indicator “b” is flashing. The actual tempera- ture in the My Zone compartment is displayed. Press button “B” to set the My Zone compart- ment temperature. A signal will sound at each key press. The temperature increases in sequences of 1°C from a minimum of – 18 °C to a maximum of +5°C. For usable hints please see EQUIPMENT.
- Notice: My Zone storage temperature setting number cannot be higher than the fridge tem- perature setting number.

Fuzzy mode
In the Fuzzy mode, the appliance can automatically ad- just the temperature setting according to the ambient temperature and temperature change in the appliance. This function is totally hand free.

Unlock the panel by pressing button “G” if it is locked.
Press button “D” (Fuzzy). An alarm sounds.
Indicator “d” illuminates and the function is acti- vated.
By repeating the above steps or selecting an other function this function can be switched off again.

Holiday mode
This function sets the refrigerator temperature per- manently to 17°C This allows to keep the door of the empty refrigera- tor closed without causing an odour or mold – during a long absence (e.g. during holiday). The other compart- ments are free for your setting.

Unlock the panel by pressing button “G” if it is locked.
Press button “E” (Holiday). An alarm sounds.
Indicator “e” illuminates and the function is acti- vated. By repeating the above steps or selecting an other function this function can be switched off again.

WARNING! During the holiday function no goods must be stored in the refrigerator compartment. The temperature of + 17 ° C is too high for storing food.

Motion sensor
By setting this function, the display automatically swit- ches on, if there will be a movement in front of appli- ance.

Unlock the panel by pressing button “G” if it is locked.
Press button “F” (M-Sensor). An alarm sounds.
Indicator “f” illuminates and the function is acti- vated. By repeating the above steps or selecting an other function this function can be switched off again.

Power-Cool function
Switch on the Power-Cool function if a larger quantity of food should be stored (for example after the purchase). The Power-Cool function accelerates the cooling of fresh food and protects the goods already stored from undesirable warming. The factory setting temperature is 0 to +1°C.

Unlock the panel by pressing the button “G” if it is locked.
Press button “A” (Fridge) for 3 seconds.
Indicator “a1” illuminates and the function is activated. By repeating the above steps or selecting another function this function can be switched off again.

Notice

This function will be automatically disabled when the setting temperature (0 to 1°C) is reached. The appliance is then operated at the previously set temperature.
The refrigerating temperature cannot be set if the Power-cool function is activated.

Power-Freeze function

Fresh food should be frozen as quickly as possible to the core. This preserved the best nutritional value, appearance, and taste. The Power-Freeze function accelerates the freezing of fresh food and protects the goods already stored from undesirable warming. If you need to freeze a large amount of food once, it is recommended to set the Power-Freeze function on ahead for 12 hours before the usage of the frozen room. The function setting temperature is below -24 °C.

Unlock the panel by pressing the button “G” if it is locked.
Press button “C” (Freezer) for 3 seconds.
Indicator “c1” illuminates and the function is activated. By repeating the above steps or selecting another function this function can be switched off again.

Tips on storing

Tips on storing fresh food Storing into the refrigerator compartment

Keep your fridge temperature below 5°C.
Hot food must be cooled to room temperature before storing in the appliance.
Foods stored in the refrigerator should be washed and dried before storing.
Food to be stored should be properly sealed to avoid odour or taste alterations.
Do not store excessive quantities of food. Leave spaces between foods to allow cold air flowing around them, for a better and more homogeneous cooling.
Foods eaten daily should be stored at the front of the shelf. Leave a gap between foods and the inner walls, allowing air flowing. In special way don’t store foods against the rear wall: foods could freeze against rear wall. Avoid di- rect contact of food (especially oily or acidic food) with the inner liner, as oil/acid can erode the inner liner. Clean away oily/acid dirt whenever it is found.
Defreeze frozen food in the fridge storage compartment. This way, you can use the frozen food to decrease the temperature in the compartment and save energy.
The ageing process of fruit and vegetables such as courgettes, melons, papaya, ba- nana, pineapple, etc. can be accelerated in the refrigerator. Therefore, it is not advis- able to store them in the refrigerator. However, the ripening of strongly green fruits can be promoted for a certain period. Onions, garlic, ginger and other root vegeta- bles should also be stored at room temperature.
Unpleasant odours inside the fridge are a sign that something has spilled and clean- ing is required. See CARE AND CLEANING.
Different foods should be placed in different areas according to their properties:

Notice

Please keep a distance more than 10 mm between the food placed and air duct or sensors to ensure the cooling effect.

Butter, cheese, etc.
Eggs, cans, canned food, spices, etc.
Drinks and bottled foods.
Pickled foods, canned food, etc.
Meat products, snack foods, pasta, canned food, milk, tofu, dairy etc.
Cooked meat, sausages, etc.
Dry Zone drawer: dry fruits, butter oils, chocolate
Humidity zone drawer: Fruit, vegetables, salad, etc.

Storage into the freezer compartment

Keep the freezer temperature at- 18°C.
24 hours before freezing switch on the Power-Freeze function; -for small quantities of food 4-6 hours are sufficient.
Hot food must be cooled to room temperature before storing in the freezer com- partment.
Food cut into small portions will freeze faster and be easier to defrost and cook. The recommended weight for each portion is less than 2.5 kg It is better to pack food before putting it into the freezer. The outside of the pack- aging must be dry to avoid bags sticking together. Packaging materials should be odour-free, airtight, non-poisonous and nontoxic.
In order to avoid expiration of storage periods, please note the freezing date, time limit and name of the food on the packaging according to the storage periods of dif- ferent foods.
WARNING!: Acid, alkali and salt etc. could erode the internal surface of the freezer. Do not place the food having these substances (e.g. sea fish) directly on the internal surface. Salt water in the freezer should be cleaned up immediately.
Do not exceed the food storage times recommended by the manufacturers. Only take the required amount of food out of the freezer.
Consume defrosted food quickly. Defrosted food cannot be re-frozen unless it is first cooked, otherwise it may bless edible.
Do not load excessive quantities of fresh food in the freezer compartment. Referto the freezing capacity of the freezer – See TECHNICAL DATA or data at the type plate.
Food can be stored in the freezer at a temperature of at least -18°C for 2 to 12 months, depending on its properties (e.g., meat: 3-12 months, vegetables: 6-12 months)
When freezing fresh food, avoid bringing it in contact with already frozen food. Risk of thawing!

When storing commercially frozen foods, please follow these guidelines:

Always follow manufacturers’ guidelines for the length of time you should store food for. Do not exceed these guidelines!
Try to keep the length of time between purchase and storage as short as possible to preserve food quality.
Buy frozen foods, which have been stored at a temperature of -18 °C or below.
Avoid buying food which has ice or frost on the packaging – This indicates that the products might have been partially defrosted and refrozen at some point – temper- ature rises affect the quality of food.

Notice

Please keep the distance more than 10 mm between the food placed and air duct to ensure the cooling effect.

Equipment

Multi-air-flow
The refrigerator is equipped with a multi-air-flow sys- tem, with which cool air flows are located on every shelf level. This helps to maintain a uniform temperature to ensure that your food is kept fresher for longer.
Adjustable shelves
The height of the shelves can be adjusted to fit your storage needs.

To relocate a shelf, remove it first by uplifting its hind edge (1) and pulling it out (2).
To reinstall it, put it on the lugs on both sides and push it to the most rearward position until the rear of the shelf is fixed inside the slots in the sides.

Notice: Ensure that all ends of a shelf are level.
My Zone compartment

The appliance is equipped with a My Zone compartment.
Depending on the purpose desired temperature can be choosen.
Storage temperature can be adjusted between – 18 °C and +5°C:
For the setting of the My Zone drawer, please check section USE.

Notice

Due to different water contents of meat, some meat with more moisture will be fro-zen at temperatures lower than 0 °C. So “immediately cut” meat should be stored in My-Zone compartment, with temperatures min. 0 °C.
Cold-sensitive fruits like pineapple, avocado, bananas, grapefruits and vegetables such as potatoes, aubergines, beans, cucumbers, zucchini and tomatoes and cheese should not be stored in the My Zone compartment.
When the My Zone compartment is used as a compartment of Freezing Chamber, the noise and energy consumption of Refrigerator will increase to some extent.

Humidity zone drawer

In this compartment the humidity level is around 85%.
It is controlled automatically by the system and is suit- able to store fruits, vegetables, salads etc.

Dry zone drawer

In this compartment the humidity level is around 45%
This drawer is suitable to store dry fruit and other dry food with low water content like butter, fats and oils or chocolate.

Removable door racks

The door racks can be removed for cleaning:
- Place hands on each side of the rack, lift it upwards (1) and pull it out (2).
- In order to insert the door rack, the above steps are carried out in reverse order.

Removable freezer drawer

To remove the drawer out, pull out to the maximum ex- tent (1), lift and remove (2).
In order to insert the drawer, the above steps are car- ried out in reverse order.

OPTIONAL: OK-temperature indicator The OK-temperature indicator can be used to deter- mine temperatures below +4°C. Gradually reduce the temperature if the sign does not indicate “OK”

Notice: When the appliance is switched on, it may take up to 12 hours for the correct tempera- tures to be reached.

Ice cube maker

Pour fresh drinking water into each ice- making box as per the scale mark inside the measuring cup, do not exceed the scale mark.
- Notice: Do not bring water between the 2 buttons, oth- erwise the buttons maybe frozen and the ice cubes cannot drop into the storage box.
Put the box into the freezing compartment.
After water becomes ice, take the ice maker out of the appliance and rotate the button by hand. Then, ice blocks will fall into the ice box au- tomatically. Remove the cover and fetch the ice cubs.
- Dynamic ATB
- A three-dimensional freshness-keeping technology is applied, which can prolong the time that fruits and vegetables are kept fresh.
- The Light
- The LED interior light comes on when the door is opened. The performance of the lights is not affected by any of the appliance’s other settings.

Care and cleaning

WARNING!

Disconnect the appliance from the power supply before cleaning.

Cleaning

Clean the appliance when only little or no food is stored.
The appliance should be cleaned every four weeks for good maintenance and to prevent bad stored food odors.

WARNING!

Do not clean the appliance with hard brushes, wire brushes, detergent powder, petrol,amyl acetate, acetone and similar organic solutions, acid or alkaline solutions. Please clean with special refrigerator detergent to avoid damage.
Do not spray or flush the appliance during cleaning.
Do not use water spray or steam to clean the appliance.
Do not clean the cold glass shelves with hot water. Sudden temperature change may cause the glass to break.
Do not touch the inside surface of the freezer storage compartment, especially with wet hands, as your hands may freeze onto the surface.
In case of heating check the condition of frozen goods.
Always keep the door gasket clean.
Clean the inside and housing of the appliance with a sponge dampened in warm water and neutral de tergent.
Rinse and dry with soft cloth.
Use a dry cloth to clean the switches, LEDs and other electric or electronic parts.
Do not clean any of the parts of the appliance in a dishwasher.
Allow at least 5 minutes before restarting the ap- pliance as frequent starting may damage the com- pressor.

Cleaning the ice cube maker

Take off the ice cube maker out of the appliance.
Remove cover (A) and (B).
Clean the ice cube maker with warm water and liquid dishwashing detergent. Make sure all soap is rinsed off.
Close the covers, refill with drinking water and re- place the ice cube maker inside the appliance.

Defrosting
The defrosting of the refrigerator and the freezer compartment are done automatically; no manual operation is needed.
Replacing the LED-lamps

WARNING!
- Do not replace the LED lamp yourself, it must only be replaced by either the manufac- turer or the authorised service agent.
- The lamps adopt LED as its light source, featuring low energy consumption and long ser- vice life. If there is any abnormality, please contact the customer service. See CUSTOMER SERVICE.

Parameter of the lamps:

Non-use for a longer period

If the appliance is not used for an extended period of time, and you will not use only the
Holiday-function or the fridge off function for the refrigerator:
Take out the food.
Unplug the power cord.
Clean the appliance as described above.
Keep the doors open to prevent the creation of bad odours inside

Notice

Turn the appliance off only if strictly necessary.

Moving the appliance

Remove all food and unplug the appliance.
Secure shelves and other moveable parts in the fridge and the freezer with adhesive tape.
Do not tilt the refrigerator more than 45° to avoid damaging the refrigerating system.

WARNING!

Do not lift the appliance by its handles.
Never place the appliance horizontally on the ground.

Troubleshooting

Many occuring problems could be solved by yourself without specific expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE.
WARNING!

Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
Electrical equipment should be serviced only by qualified electrical experts, because improper repairs can cause considerable consequential damages
A damaged supply should only be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Power interruption

In the event of a power cut, food should remain safely cold for about 7 hours. Follow these tips during a prolonged power interruption, especially in summer:
Open the door/drawer as few times as possible.
Do not put additional food into the appliance during a power interruption.
If prior notice of a power interruption is given and the interruption duration is longer than 7 hours, make some ice and put it in a container in the top of the refrigerator compartment.
An inspection of the goods is required immediately after the interruption.
As the temperature in the refrigerator rises during a power interruption or other failure, the storage period and edible quality of food will be reduced.
Any food that defrosts should be either consumed or cooked and refrozen (where suitable) soon afterward to prevent health risks.

Memory function during power interruption

After restoration of power the appliance continues with the settings that were set before the power failure.

Installation

Unpacking

WARNING!
- The appliance is heavy. Always handle with at least two persons.
- Keep all packaging materials out of children’s reach and dispose them in an environmentally friendly manner.
- Take the appliance out of the packaging.
- Remove all packaging materials.
Environmental conditions
- The room temperature should always be between 10° C and 38 °C, since it can influence the temperature inside the appliance and its energy consumption.
- Do not install the appliance near other heat-emitting appliances (ovens, refrigerators) without isolation.

Space requirement
Required space when door is opened:

W1=1215 mm
W2=1520 mm
D1=650 mm
D2=1130 mm

Ventilaton cross-section

To achieve sufficient ventilation of the appliance for safety reasons, the information of the required venti- lation cross sections must be observed.

Aligning the appliance

The appliance should be placed on a flat and solid sur- face.

Tilt the appliance slightly backwards.
Set the feet to the desired level.
- Make sure the distance to the wall on the hinge side is at least 100 mm for the door to open properly.
The stability can be checked by alternately bump-ing on the diagonals. The slightly swaying should be the same in both directions. Otherwise the frame can warp: possible leaking door seals are the result. A low tendency to the rear facilitates the closing of the door.

Fine tuning of the doors
If the doors are not in one level, this mismatch can be remedied by following:

A) Using adjustable foot
- Rotate the adjustable foot according to the direction of arrow to turn up or down the foot.
B) Using spacers
- Open the upper door and lift it.
- Carefully clip the spacer (enclosed in the accessory baq) in the white plastic ring of the middle hinge by hand or using tools like pliers. Do not scratch or bruise the door.
- Notice: In the future use of refrigerator, doors uneven phenomenon may occur to the weight of stored food. Then please adjust according to the above methods

Waiting time

To the maintenance-free lubrication oil is located in the capsule of the compressor.
This oil can get through the closed pipe system during slanting transport.
Before connecting the appliance to the power supply you have to wait 2-5 hours so that the oil runs back into the capsule.

Electrical connection

Before each connection check if:

power supply, socket, and fusing are appropriate to the rating plate.
the power socket is earthed and no multi-plug or extension.
the power plug and socket are strictly according.
Connect the plug to a properly installed household socket.
- WARNING! To avoid risks a damaged power cord must be replaced by customer service (see warranty card).

Technical data

Product fiche according to regulation EU No. 1060/2010

“based on standard test results for 24 hours. Actual energy consumption will depend on how the appliance is used and where it is located.

Additional technical data

Energy saving tips

Make sure the appliance is properly ventilated (see INSTALLATION).
Do not install the appliance in direct sunlight or in near of heat sources(e.g. stoves, heaters).
Avoid unnecessarily low temperatures in the appliance. The energy consumption in creases the lower the temperature in the appliance is set.
Functions like POWER-FREEZE consume more energy.
Allow warm food to cool down before placing it in the appliance.
Open the appliance door as little and as briefly as possible.
Do not overfill the appliance to avoid obstructing the airflow.
Avoid air within the food packaging.
Keep door seals clean so that the door always closes correctly.
Defreeze frozen food in the fridge storage compartment or in My Zone compart- ment by setting a temperature of -3 °C.

Customer Service

We recommend our Haier Customer Service and the use of original spare parts.
If you have a problem with your appliance, please first check the section TROUBLESHOOTING.

If you cannot find a solution there, please contact

your local dealer or
our European Call Service Center (see listed phone numbers below) or
the Service & Support area at www.haier.com. where you can activate the service claim and also find FAQs.
To contact our Service, ensure that you have the following data available.
The information can be found on the rating plate.
Model
Serial No.
Also, check the Warranty Card supplied with the product in case of warranty.
For other countries please refer to www.haier.com
Haier Europe Trading S.r.I
Branch UK
Westgate House, Westgate, Ealing
London, W5 1YY
Color code:
- S, T, CR, BB, W, N, GW,
- G, B,GR, X, F, VZ, SN or M
- HTF-610D*7