GYMAX B09BVTYSB8 3.75HP Folding Treadmill User Manual
- June 2, 2024
- GYMAX
Table of Contents
GYMAX B09BVTYSB8 3.75HP Folding Treadmill
OPERATION SYSTEM INSTRUCTIONS
Electronic Meter Function Instruction
- PO is manual program for users. P1-P12 is the built-in automatic training program.
- Speed range: 0.6-10.5mph ;lncline:0-15%
- System self-check, abnormal information prompt function.
- MP3 Function (Optional).
- Fan Function (Optional).
- HRC function (Optional).
Digital Tube Window Display Instructions
- “SPEED” “PULSE” window: Displays speed/heart rate values.
- “TIME” “CALORIES” window: Displays time/calories values.
- DISTANCE”” INCLINE” window: Display distance/incline value.
Keys operating instructions
- “PROG”: Program selection key. Under stopping state, Loop selection program P0-P12.
- “MODE” It is normal MODE when it is selected to the initial state of manual MODE, Press MODE to select the countdown MODE in manual MODE – >Countdown distance MODE – >Countdown calories
- MODE – >Positive timing MODE. Reset key for the countdown time default value (30 minutes) in P1-P12.
- “START”: START/STOP keys, START the treadmill in the stopping state, STOP the treadmill in the running state.
- “STOP”: STOP key, Press the STOP key to slowly stop in the running state.
- Speed Increment/Decrement Key, In the state of stopping or measuring fat is the key of setting parameters; in the state of running is the key of speed increment/decrement;
- “QUICK SPEED”: 7, 4 mph quick speed key, in the running state of the treadmill, directly set the speed as the key to specify the value.
- Incline increment key
- Incline decrement key
- “QUICK INCLINE”: 5, 10 Incline keys, directly set incline as specified value while running.
Safety key function instructions
- The safety key is composed of light touch switch, clothes clip and nylon rope. In any state, as long as the safety key is out of position, the treadmill stops running, the electronic meter keyboard is forbidden to operate. And the screen displays “e-07” with a prompt sound. After placing the security lock every time, the screen will display “0” for seconds, and then enter the system default working state.
User’s Guide
- Insert the power cord plug into the 15A power socket with safety grounding, turn on the power switch, the electronic meter screen is fully displayed with the prompt sound, and then identify the safety key.
• Put the safety key in the position of electronic meter, Clip the clothes clip to the clothes on the chest, and the screen will be fully displayed for 2 seconds before entering the default working state; all counters are reset, set value is reset, and the treadmill is in the positive timing mode of manual program PO.
Press” PROG” to cycle select a program: P0-P12.
- “P0” is a user-defined program. Press “MODE” to cycle select four training modes. The training speed and slope are set by the user.
- Training mode 1: Time counting, Time, Distance, Calorie counting, turn off the setting function
- Training mode 2: Countdown, Time window flashes under the setting state. Press “+”and”-” to modify the setting value.
- Training mode 3:Calorie count, The calorie window flashes under the setting state and press “+” and”-” to modify the setting value. The setting range is 20-990 CAL, and the default value is 50 CAL.
- Training mode 4: Count down distance, Distance window flashes in the setting state, Press the”+” and”-” keys to modify the set value. The setting range is 1.00-99.0 mile, and the default value is 1 mile.
- P1-P12 is the system setting program, which only trains in the countdown MODE. Time window flashes under the setting state, Press”+” and”-” to modify the setting value. Press “MODE” key reset to the default value, the setting range is 5-100MIN, the default value is 30:00;
- After setting the training mode, press the “START” key, and the screen will start to display the 5- second countdown with 5 prompts sound, after the countdown is 1, the treadmill will start gently, slowly accelerate to the displayed speed, and then run smoothly at a constant speed.
- a. Press” +”or”-” or “QUICK SPEED” key to adjust treadmill speed while running.
- b. The speed and incline of each program are divided into 10 segments in P1-P12, and each segment is divided according to the set time. The adjusted speed and incline are only valid within the current segment, and three prompts sound will be sent three seconds in advance when converting between segments. The motor will stop automatically with a prompt sound when the program runs for 10 full paragraphs.
- c. Press the “START” key again when the motor is running, and the motor will switch between suspended and running. Restart in the suspended state, the recorded running data and process remain unchanged.
- Press “STOP”key when the motor is running, and the motor will slow down until ii stops smoothly. All settings will be restored to default state.
- In any state, pull the safety key, the screen displays”E-07″ with a warning sound, and the treadmill stops running.
- The electronic control system is under safety monitoring at any time. As long as any abnormality is found, the running machine will stop in an emergency and the screen will display an abnormal message with a prompt sound.
Automatic program P1-P12 speed and incline table
Failures and Processing Methods
The product is designed to be reliable and easy to use. If you have problems,
please read the
following questions carefully.
Problem: Meter does not display
Solution: Check if the power cord is plugged in, the plug is loose, and the
power switch is
turned on.
Problem: Sudden power outage during use
Solution: Check if the power cord is securely connected and the overcurrent
protector is
disconnected.
Problem: When the treadmill moves up and down, it suddenly closes.
Solution: Check that the power cord connected to the outlet is long enough.
Problem: Running belt is not in the middle
Solution: Check if the treadmill is placed on a flat surface and the running
belt is adjusted.
Refer to the adjustment process of the running belt.
If the problem is not within the above, and you are not sure how to solve it,
please contact us in
time, please do not handle it privately.
Belt Adjustment and Maintenance
-
BeltAdjustment :
Belt adjustment and tension performs two functions: The distance between belt and motor cover from left to right with+-5MM,then needed to be adjusted. Adjust belt by speed not more than 4KM/H-
A, Running belt is shifting to the right: Using hex key provided, turn the right bolt clockwise or left bolt counterclockwise.
-
B, Running belt is shifting to the left Using hex key provided, turn the left bolt clockwise or right bolt counterclockwise. Running belt is slipping during use: Slight running belt slipping is normal while using for a period, using the hex key provided, turn both left and right rear roller adjustment bolts in the same distanCB.
See the correct running belt shown as below: -
A, The distance between running belt and board is:
Within 15-20mm—-Normal -
Over 20mm—-needed to be adjusted
-
Under 15mm—–needed to be adjusted
-
B. The speed for running belt is 5Km/h, Hold on the handrail, stand on the side rail, one foot on the belt but without slipping—lt is normal.
-
Cleaning:
Routine Cleaning of your unit will extend the life of your unit. Warning I To prevent electric shock, be sure the power to the treadmill is OFF and the unit is unplugged from the wall electrical outlet before attempting any cleaning or maintenance. After each workout: wipe off the console and with an treadmill surfaces with a clean, water dam pen ed soft cloth to remove excess sweat. Afle reach wortout.
Lubrication:
It is recommended that the walking board be checked periodically (around 3 months) for lubrication Using hex lift the belt and insert the silicone oil of about 20 grams to spray smoothly (adjust belt before lubrication)
Important Terms
Warning
Please talk to your doctor before you start an exercise program. Please be
sure lo consult your doctor or a professional before you start if you are over
the age of 35 or not feeling well, and this is your first time fitness
exercises. Please follow the instructions to install and use this product.
Cautions
- Please choose a bright and well-ventilated place to install the treadmill.
- Please keep your children and pets away from the treadmill. Do not leave your child alone in the room where the treadmill is kept.
- Please do not put the treadmill in a damp place. It will cause trouble.
- Please do not wear clothes that are too long or too baggy for your fitness exercises. In case they are hung on the treadmill. Usually wear running shoes or exercise shoes with rubber soles.
- The treadmill is special equipment. Do not modify or as the other user. &. Please don’t put the treadmill and miscellaneous things together.
- To be safe, please check the screws and other accessories on the treadmill for locking before using.
- a.Please do warm up before exercise to prevent Inquiry.
- If you feel dizziness, nausea, chest tightness or other abnormal symptoms in the process of exercise, please stop exercising immediately and consult a professional doctor if necessary.
- Please use the treadmill under the guidance of a professional health physician for disabled persons. This manual Is Just for reference. If there 19 anything wrong, plene contact with us.
Gymax App Instruction Manual v1.02
This document is applicable to the Android version and iOS versions of the official APP of Gymax
- TOS: Search Gymax in App Store to download
- Android: search and download from Google Play store
Functions Overview
Gymax App iOS/Android with Gymax platform provides users the control of sports intelligent device, sports data recording, sports mall, dynamic sharing in the community, system Settings and other functions.
The Main functions
- Sign In
- Sports Scenes
- Sports Mall
- Community Dynamic
- Settings
Sign in Process
Sign in
For the convenience of users, Gymax provides three logln methods: Facebook and E-mall, and iOS users can also Sign in with Appia. Users can quickly sign in to the Gym ax App and use it.
Retrieve Password
If E-mail users forget Passwords, users can click •Forget Password” on the
mailbox login interface to jump to the Password retrieval interface, and than
reset Passwords.
Edit information
In the personal information interface, clicking the avatar, users can edit the avatar and upload the avatar by choosing album or camera.
Sports Scenes
Connecting services On the home page, users can freely choose the device type
to connect. After connecting successfully, users then start the device page,
such as the “Treadmill” interface .
Starting exercise
Selecting the device page, such as “Start” on the “Treadmill” interface, users enter the running free, as shown below:
- Waiting for GyMax to automatically connect to the treadmill
- When the connection status sign is lit, it means that the APP has successfully connected to the treadmill. Users click ,then the treadmill start Running and enter the countdown. 3.2.1 GO.
- The Gymax App synchronizes exercise data, such as mileage, duration, calories, and speed, as users run on the treadmill, and users can start or stop, accelerate or decelerate the treadmill, which intuitively shows users’ current sports ranking and the number of online sports in real time.
- When users finish the exercise, the Gymax App will show users’ total mileage.
- Users can share the sports data to the community or save it to the phone album
Sports Plan
Users can click “Add More Training Plans” to Add users’ own sports plans
.
Setting Goals
- Users can set suitable sports goals
- When the goal is reached, the exercise automatically ends.
Training Course
- Users can select courses in the interface of training course
- And then Start training with a fitness coach.
Exercise Record
The user can view the Exercise data record in the device page, (me-exercise
data)
Sports Mall
Users can purchase satisfied sports devices.
Community dynamic
Settings
System Settings
Users can click “Me” to enter the set up, lncludlng unit, feedback, terms of agreement, privacy agreement and clear cache, etc.
Clear Cache
Users can clean up the system cache according to users’ needs, including 0ymaxApp H5 web page load cache and image load cache
Feedback
Users can submit suggestions end the problem for improving the product
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>