EPSON 111-56-QUM-011 Chit and Receipt Printing User Guide
- June 15, 2024
- Epson
Table of Contents
EPSON 111-56-QUM-011 Chit and Receipt Printing
Product Information
Specifications
- Model: 111-56-QUM-011
- Revision: 3.00
Chit and Receipt Printing
About this Guide
- When enabled, this function allows the Master or POS attached device to print an incoming chit or receipt on the attached printer. This can only be done when the POS is sending print jobs to the KDS, which is configured for a POS parser.
- EPSON is a registered trademark and EPSON is a registered logomark of Seiko Epson Corporation. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks. Copyright 2023 Seiko Epson Corporation.
Product Usage Instructions
How to Configure Chit and Receipt Printing
This procedure assumes that you already have a Multi-Station KDS setup as
described in the Epson KDS Multi-Station Quick Start Guide. However, these
instructions can be referenced to enable incoming chit and receipt printing in
any Epson KDS that uses a Parser.
- Select Stations.
- Click Device Config.
- Select POS Attached Device to enable the Chit and Receipt Printing function.
- Click Print Chit.
- Click Save.
- Click Publish.
Frequently Asked Questions (FAQ)
-
Q: What does the Chit and Receipt Printing function do?
A: The Chit and Receipt Printing function allows the Master or POS attached device to print an incoming chit or receipt on the attached printer. -
Q: Can I enable Chit and Receipt Printing on any Epson KDS?
A: Yes, you can enable Chit and Receipt Printing on any Epson KDS that uses a Parser.
Chit and Receipt Printing
About this Guide
This guide consists of three sections:
- Overview – A detailed description of what chit and receipt printing is in an Epson TrueOrder Kitchen Display System (KDS).
- How to configure Chit and Receipt Printing – A procedure that can be followed to enable this functionality.
- Appendix – POS/KDS Menu Routing Considerations
Overview
- When enabled, this function allows the Master or POS attached device to print an incoming chit or receipt on attached printer. This can only be done when the POS is sending print jobs to the KDS which is configured for a POS parser.
- EPSON is a registered trademark and EPSON is a registered logomark of Seiko Epson Corporation. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks. Copyright 2023 Seiko Epson Corporation.
How to Configure Chit and Receipt Printing
This procedure assumes that you already have a Multi-Station KDS setup as described in the Epson KDS Multi-Station Quick Start Guide. However, these instructions can be referenced to enable incoming chit and receipt printing in any Epson KDS that uses a Parser.
Enable Print Chit Function
- Select Stations
- Click Device Config.
- Select POS Attached Device to enable the Chit and Receipt Printing function.
- Click Print Chit.
- Click Save
- Click Publish.
Appendix – POS/KDS Menu Routing
Considerations
Some considerations dependent on if you are POS Menu Routing vs KDS Menu
Routing.
- KDS Menu Routing – The print job is directed to the Master, POS Attached device so the “Print Chit” option will enable the incoming receipt/chit to print immediately when it is sent.
- POS Menu Routing – The print jobs are not directed to the Master, POS Attached device. They are directed to the prep stations. Enabling the “Print Chit” option on the Master, POS Attached device will print all print jobs directed to the prep stations.
Chit and Receipt Printing Quick User Manual
Documents / Resources
|
EPSON 111-56-QUM-011 Chit and Receipt
Printing
[pdf] User Guide
111-56-QUM-011, 111-56-QUM-011 Chit and Receipt Printing, Chit and Receipt
Printing, Receipt Printing, Printing
---|---