SYNCO Lav-S6M2 Omnidirectional Lavalier Microphone User Manual

SYNCO Lav-S6M2 Omnidirectional Lavalier Microphone

INTRODUCTION

Thank you for choosing SYNCO product. Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your SYNCO Product

• Please keep the product in a dry, clean, dust-free environment.
• Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
• Use only a soft and dry cloth for cleaning the product.
• Malfunction may be caused by dropping, impact of external force.
• Do not attempt to disassemble the product. Doing so voids warranty.
• Please have the product checked or repaired by authorized technicians if any malfunctions happened.
• Failure to follow all the instructions may result in mechanics damage.
• Warranty does not apply to human errors.

Product Instruction.

1.  Power Button & Low Cut
2.  Type-C Charging Port Please fully charge the microphone before use.
3.  Working Indicator
4.  Gain Control Adjust the gain as per actual recording
5.  3.5mm Monitoring Jack Plug the headphones in to realtime monitor the recording.
6.  Mode Switch Choose the corresponding mode based on your device.

Operations

•  The Use of Wind Muff & Tie Clip
•  The Use of Microphone

Specifications.

• Polar Pattern: Omni-directional
• Performance Parameter

Warranty

Warranty Period

•  Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
•  Original SYNCO products are entitled to 12-month limited warranty service.
• The warranty period begins on the date of purchase of brand new, unused products by the first end-user.
• Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

• Faults resulted from inappropriate use of a product without following its operation specification
• Artificial damage, e.g. crash, squeeze, scratch, or soaking
• Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
• The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
• All consumable accessory attached to a product, like cable, wind muff, battery
• Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

• If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at support@syncoaudio.com.
• Please retain your sales receipt and warranty certificate as proof of purchase.
• If any of these documents is missing, only sales return or chargeable service will be provided.
• If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

References

• SYNCO | Branded Microphone Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>