SYNCO MMic-U3 Cardioid Microphone with Real Time Monitoring On Camera Microphone Recording Video Mic User Manual

June 6, 2024
SYNCO

SYNCO MMic-U3 Cardioid Microphone with Real Time Monitoring On Camera Microphone Recording Video Mic User Manual
SYNCO MMic-U3 Cardioid Microphone with Real Time Monitoring On Camera
Microphone Recording Video Mic

Package List

MMic-U3 Microphone x1

Cold shoe x1

Carrying Bag x1

Metal Plate x2

Charging Cable x1
Product Components
Type-C to 3.5mm TRRS Cable x1
Product Components

Operations

  1. Power/Mute Button
    Long press 2 seconds: Turn on/off the microphone
    Short press: Switch on/off Mute function

  2. Working Status Indicator

    • When the microphone is on, the indicator would stay on green.
    • When mute function is on, the indicator would turn red instead of green and turn back to green after turning off mute function.
  3. 75Hz Low Cut Indicator
    When turn on 75Hz Low Cut, the indicator stays on blue.

  4. 150Hz Low Cut Indicator
    When turn on 150Hz Low Cut, the indicator stays on blue.
    Operating Instructions

3.5mm Monitoring Jack

Plug in the headphone (impedance under 100 Ω ) for real-time recording monitoring

Gain Control

Roll left: Decrease gain
Roll right: Increase gain

Operating Instructions

  1. Low Cut

    • Low cut off
    • 75Hz Low cut on
    • 150Hz Low cut on
      Operating Instructions
  2. Type-C Port
    Charging: Connect with power supply via Charging Cable
    Output: Connect with devices via Type-C to TRRS Cable

    • When connected or disconnected through 3.5mm connector, the microphone would switch on/off automatically

1/4 Screw

Operating Instructions

Magnetic Back

After putting the metal plate to phones and other surfaces, the microphone can get attached easily and firmly to the magnetic back.

Magnetic Back

Caring For Your SYNCO Product

  • Please keep the product in a dry, clean, dust-free environment.
  • Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
  • Use only a soft and dry cloth for cleaning the product.
  • Malfunction may be caused by dropping, impact of external force.
  • Do not attempt to disassemble the product. Doing so voids warranty.
  • Please have the product checked or repaired by authorized technicians if any malfunctions happened.
  • Failure to follow all the instructions may result in mechanics damage.
  • Warranty does not apply to human errors.

Specifications

  1. Polar Pattern: Cardioid
    Polar Pattern

  2. Performance Parameter
    **** Sound Field| Mono
    ---|---
    Capsule| Electret Condenser
    Polar Pattern| Cardioid
    Frequency Range| 50Hz~12kHz
    Sensitivity| -26.5dbV@1KHz
    Gain Control| 0-15dB
    Max. SPL| 105dB
    Low Cut Frequency| Level 1: 75Hz, Level 2: 150Hz
    Output Power of Monitoring Jack| 100mW@32Ω
    Audio Output Cable| Type-C to TRRS (TRS Adaptive)
    Power| 500mAH Lithium Battery
    Charging Data| DC+5V≥500mA
    Battery Life| About 40 hours (Monitor at medium volume)
    Dimensions (H x W x L)| 116 x 53 x 46mm
    Weight| 67g

Warranty

Warranty Period

Thank you for purchasing SYNCO products.

  1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
  2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user.
    Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

  • Faults resulted from inappropriate use of a product without following its operation specification
  • Artificial damage, e.g. crash, squeeze, scratch, or soaking
  • Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
  • The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
  • All consumable accessory attached to a product, like cable, wind muff, battery
  • Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

  • If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service through email at support@syncoaudio.com.
  • Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
  • If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcomed to contact us via Email:support@syncoaudio.com

Customer Name:| Customer Name:|
---|---|---
Phone Number:|
Email:|
Address:|
SALES INFORMATION| Sales Date:|
Model:|
Product Code:|
Dealer:|
REPAIR RECORD| Service Date:|
Technician:|
Issue:|

RESULT| Solved| Unsolved| Returned(Replaced)

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals