FOX CEI200 LS Pole Capsule Instruction Manual

: October 30, 2023
: FOX

Table of Contents

FOX CEI200 LS Pole Capsule
Product Features
Product Operation
Product Battery Replacement
Features
Operation
Working life of your Halo LS capsule
Low battery warning
Fitting the batteries
Product Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FOX CEI200 LS Pole Capsule

The Halo LS Capsule is a product designed to provide a visual marker in low light and light environments. It features a red LED, a sealing O-ring, and a battery cap with 3/8 BSF thread. The top cap thread allows for sealed attachment and the illuminating feature makes it easy to find in the dark.

Product Features

Red LED
Sealing O-Ring
Illuminating Top Cap Thread for Sealed Attachment
Battery Cap 3/8 BSF Thread

Product Operation

In low-light-level environments, the LED will turn on and remain on when switched on. In light environments, the LED will turn on and then turn off after 2 seconds when switched on. When switched off, the LED will turn on and then turn off after 2 seconds in both low and light environments.

Working Life of Your Halo LS Capsule

The Halo LS Capsule has a low battery warning system that will turn off the LED twice every 60 seconds in low-light-level environments and turn on the LED twice every 60 seconds in light environments. Once the “Low Battery Warning” has begun, the LS Capsule will continue to work for approximately 8 hours. After the warning is activated, batteries should be replaced immediately.

Product Battery Replacement

Unscrew the battery cap by hand.
Take care removing the batteries. They will freely slide out of the Capsule.
Insert new batteries and ensure correct polarity.
Screw the battery cap back onto the Capsule, compressing the O-Ring seal.

The Halo LS Capsule requires 2 x LR6 AA 1.5V alkaline batteries. It is important to use good-quality batteries to ensure maximum battery life and reduce the risk of battery leakage. The LS Capsule has an IPX7 rating, making it waterproof. However, if exposed to prolonged heavy rain or frequent submersion, it is important to allow the unit to dry out properly by bringing it indoors and
letting it dry fully after use. Never place batteries in a hot environment (e.g. on a radiator).

Warnings

FOX and Halo are registered trademarks. The contents of this manual are subject to change without notice. The Halo LS Capsule is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016. The R&TTE documents can be found at: www.foxint.com/home/support/declarations-of- conformity/. Registered designs and patents are pending.

Features

Weatherproof Sealed Unit
Light Sensor LED Activation
Very Low Battery Drain
Low Battery Warning
Digital Circuitry
High Visibility Red LED

Operation

Capsule On/Off: A held press of the on/off button for 2 second will turn the Capsule On/Off – LED will always illuminate when first turned ON.

Low Light Level Environment:

ON: LED will turn ON and remain ON
OFF: LED will be ON and then switch OFF after 2 seconds

Light Environment:

ON: LED will switch ON and then switch OFF after 2 seconds
OFF: LED will turn ON then OFF after 2 seconds

Working life of your Halo LS capsule

You can expect your Halo LS Capsule to have the following approximate “Working Life” duration when new batteries are used:

Operational Life (Capsule is ON, and the LED is ON – Low light environment) = 165 hours continual use

Low battery warning

As the batteries approach a depleted state and replacement is required, the LS Capsule will “double flash”.

Low light level environment – LED will turn OFF twice every 60 seconds
Light environment – LED will turn ON twice every 60 seconds

Once the ‘Low Battery Warning’ has begun, your LS Capsule will continue to work for approximately 8 hours.
Once the ‘Low Battery Warning’ has been activated, batteries should be replaced immediately.

Fitting the batteries

Turn off unit prior to fitting or replacing batteries.
Unscrew the battery cap by hand.
Take care removing the batteries.
- They will freely slide out of the Capsule.
Insert new batteries and ensure correct polarity.
Screw the battery cap back onto the Capsule.
For best weatherproofing, ensure the battery cap has a good seal by firmly tightening onto the Capsule, compressing the O-Ring seal.

Battery requirements

Your Halo LS Capsule requires 2 x LR6 AA 1.5V alkaline batteries. The use of good quality batteries is essential for maximum battery life.

To reduce the risk of battery leakage:

DO NOT mix old and new batteries
DO NOT mix different battery types
The use of rechargeable batteries is NOT recommended

Please ensure the batteries are removed from the Capsule during long periods without use.

Drying out after use in heavy rain

Your Halo LS Capsule has been designed to be waterproof. However, if exposed to prolonged heavy rain or frequent submersion, it is important to allow the unit to dry out properly by bringing the unit indoors and allowing to dry fully after use.

Warning: NEVER place batteries in a hot environment (e.g. on a radiator).

DO NOT trigger the LED in close proximity to human eyes.
Store this equipment out of reach of children and infants.
Avoid dropping or subjecting the Capsule to severe impacts.

Product Information

FOX and Halo are Registered Trade Marks. We reserve the right to alter or modify the contents of this manual. Hereby, Fox International Group Ltd, declares this Halo LS Capsule is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016. The R&TTE documents can be found at: www.foxint.com/home/support /declarations-of-conformity/ Registered Designs and Patents Pending.

IP Rating: IPX7

www.foxint.com