SYNCO G2-A2 Dual Wireless Microphone User Manual
- June 6, 2024
- SYNCO
Table of Contents
- SYNCO G2-A2 Dual Wireless Microphone User Manual
- (Note: The first TX that successfully connects with the RX will be
- Setting The Recording Level Correctly
- Warranty
- Warranty Exclusions and Limitations
- WARRANTY CERTIFICATE
- Caring For Your SYN CO Product
- Package List
- Product Instruction
- Display Screen
- Operations
- 1.Power/ Mono/Stereo Switch
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SYNCO G2-A2 Dual Wireless Microphone User Manual
(Note: The first TX that successfully connects with the RX will be
Channel A.)
6.Audio Monitoring & Output Connection
Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to get the
cleanest signals possible, it is highly recommended that you set the recording
level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mies for SONY Camera (Take A7S II for
example)
Adjust the recording level of inbuilt mies for Canon Camera (Take EOS SD Mark IV for example)
Specifications
TX Transmitter
Warranty
Warranty Period
Thank you for purchasing SYNCO products.
- Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
- Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused products by the first end-user .
Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).
Warranty Exclusions and Limitations
-
Faults resulted from inappropriate use of a product without following its operation specification
-
Artificial damage, e.g. crash, squeeze, scratch, or soaking
-
Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
-
The code on product is inconsistent with that of warranty certificate, or the code on the product or warra nty certificate is altered or torn off.
-
All consumable accessory attached to a product, like cable, wind muff, battery
-
Fa ults as a result of force majeure, such as fire, flood, lightning, etc.
Warranty Claim Procedure -
If failure or any problem occu rs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO’s customer service th rough email at support@syncoaudio.com.
-
Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
-
If the SYN CO product is out of the warra nty coverage, the service and the parts cost will be charged.
WARRANTY CERTIFICATE
Caring For Your SYN CO Product
- Please keep the product in a dry, clean, dust-free environment.
- Keep corrosive chemicals, liqu ids and heat source away from the product to prevent mechanics damage.
- Use only a soft and dry cloth for cleaning the prod uct.
- Malfunction may be caused by dropping, impact of external force.
- Do not attempt to disassemble the product. Doing so voids warranty.
- Please have the product checked or repaired by authorized technicians if any malfunctions happened.
- Failure to follow all the instructions may result in mechanics damage.
- Warranty does not apply to human errors.
Package List
Product Instruction
-
External Mic Input
-
USB-C Port
-
Power (MUTE)
-
Reset(Help with Eject Pin)
-
Low Cut
-
Pairing
-
Built-in Mic
-
Display Screen
-
Pocket Clip
-
USB-C Port
-
Power(Mono/Stereo)
-
Reset(Help with Eject Pin)
-
Channel A Gain Control
-
Channel B Gain Control
-
3.5mm Audio Output
-
3.5mm Monitoring Jack
-
Display Screen
-
Pocket Clip
Display Screen
Operations
4.Mic Windshield & Device Installation
The system will pair automatically after power on.
(Note: Before successfully connecting, the transmitter channel will display A
by default. The TX connected to the receiver first is Channel A, and the one
connected later is Channel B.)
Manual pairing: long press the Channel A Gain Control and Channel B Gain
Control on the RX and Pairing on the TX for 3 seconds at the same time.
1.Power/ Mono/Stereo Switch
The system will pair automatically after power on.
Manual pairing: long press the Channel A Gain Control and Channel B
Gain Control on the RX and Pairing on the TX for 3 seconds at the same time
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>