Binken 810 Wireless HD Extender User Manual
- June 12, 2024
- Binken
Table of Contents
Binken 810 Wireless HD Extender
© The copyright belongs to the product manufacturer.
Dear Customer
Thank you for choosing our products!
For your better use of this product, please read this manual carefully before
using ii. This product is for household use only. If there is any malfunction,
please repair it in time.
NOTE:
Please adjust the video output signal of the playback device to 720p or
1080p.
Please put TX or RX in an open place and keep a distance of 2-3m from the
wireless router to avoid signal interference.
When transmitting PC video and audio signals, some PC operating systems need
to set the video and audio signal source output.
If noise occurs during use, switch the audio setting of the signal output
lilliiiill device to stereo output.
It supports 1 transmitter for wireless transmission and 2-4 receivers.
Does not support the use of multiple transmitters in the same environment.
Transmission distance is about 20-30 meters when there is no other
wireless signal interference/obstacles in the operating environment.
The hue, saturation, and brightness of the picture output by the receiver are
different in various TVs, projectors and other equipment. You can adjust the
TV HSB parameters according to your preferences.
Please uses a 5V power adapter, a higher power adapter such as 9V or
12V will damage the product.
we provide a 1-YEAR REPLACEMENT GUARANTEE.
Please have your proof of purchase & pie of the defective product available
when you contact us.
If the product you received 1s defective, missing accessories or you need
assembly assistance, PLEASE DON’T RETURN IT TO THE STORE and contact our
after-sales mailbox directly.
Global after-sales service mailbox:
SUPPORT@PAKITE.COM
PANEL DESCRIPTION
-
Transmitter (TX) Panel Description
-
Receiver(RX) Panel Description
INSTALLATION INSTRUCTIONS
-
Transmitter (TX) Installation
-
Receiver (RX) Installation
COMPUTER CONNECTION GUIDE
- Use with Computer
Connect Transmitter (TX) and laptop using HDMI cable.
The Receiver (RX) is connected to a TV or projector
- Computer Setting
After entering the computer system, press the Windows key and the letter P key on the keyboard at the same time. The projection menu bar will appear on the right side of the screen, click “Duplicate”.
STB CONNECTION GUIDE
-
Use with STB
The Receiver (RX) is connected to a TV or projector -
STB Audio Setting
Turn on the setting function of STB and switch HDMI Audio output to LPCM 2 Channel through Audio setting.
Please Support Environment Protection Waste electrical products should
not be disposed of household wants.
Please put them to the recycle facilities.
Check with your local authority or retailer for recycling advice!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>