beper BP.200 Stand Mixer Instructions
- June 6, 2024
- beper
Table of Contents
**beper BP.200 Stand Mixer Instructions
**
Precautions
Read the following instructions carefully, since they give you
useful safety information about installation, use and maintenance and help
you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of
the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or
burning flames.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.
Main Components and Standard Accessories: Fig.A
- Accessories mounting shaft
- Engine lock/unlock lever
- Speed knob
- Power Cord
- Mixing bow
- Kneading hook
- Whisk
- Beater
- Pot cover
Using the Mixing Bowl
-
In order to lift the arm, clockwise rotation the engine lever. The arm will now move upwards. (FIG.B)
-
Place the mixing bowl into its holding device(Step1) and turn the bowl clockwise until it locks into place (Step 2). (FIG.C
-
Mount the required utensil (Kneading hook or Beater or Whisk) by inserting the top into the mounting shaft, and turn anti-clockwise until it locks into place. (FIG.D&FIG.E)
-
Now fill in your ingredients.
Do not overfill the machine – the maximum quantity of ingredients is 900g. -
Lower the arm using the engine lever, then place the pot cover into its body (FIG.F&FIG.G)
-
Switch on the machine by using the speed button to a speed between 1 and 8 (corresponding to the mixture).
-
8. For pulse operation (kneading at short intervals), turn the switch to the “PULSE” position. The switch has to be held in this position according to the desired interval length. When the switch is released it returns automatically to the “0” position.
-
After kneading/stirring turn the speed knob back to the “0” position. Then remove the plug.
-
Push the engine lever downwards and the arm will be raised.
-
The mixing bowl can now be removed.
-
The mixture can now be released with the help of a spatula and removed from the mixing bowl.
Warning: Short operation time: with heavy mixtures, do not operate the machine for more than six minutes, and then allow it to cool down for a further ten minutes. When kneading dough, do not use the speed over 5 levels to avoid wobbling strongly. During working, the top cover it’s getting hot. It’s a normal phenomenon. It will not affect the performance of the machine.
Adjusting the Levels and Using the Kneading Hook for not more than 900g of Mixture.
Use| Picture| Levela| Time (min)| Maximum|
Remarks
---|---|---|---|---|---
Kneading hook| | 1-5| 5| 600g flour and 323g water| Heavy mixtures(e.g. bread
or short pastry)
Beater|
| 1-6| 3| 400g flour and 500g water| Medium-heavy mixtures(e.g.crepes or
sponge mixture)
Whisk|
| 6-8| 5| 15 egg whites| Light mixtures (e.g. cream,egg white, blancmange)
Cleaning
Before cleaning remove the power cord from the socket.
Never immerse the housing with motor in water!
Do not use any sharp or abrasive detergents.
Motor Housing
Only a damp rinsing cloth should be used to clean the outside of the housing.
Mixing Bowl, Mixing Equipment
Components that have come into contact with food can be cleaned in soapy
water. Allow the parts to dry thoroughly before reassembling the device. Only
theWhisk, the pot cover and the mixing bowl can be washed in the dishwasher.
The Beater and
the Kneading hook must be cleaned only by hand with soap and water.
Technical Data
Power: 1000W
Rated supply: 220-240V~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance.
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable
part of the product, Beper reserves the right to replace only the very part in
question and not the entire product
Contact your distributor in your country or after sales department beper.
E-mail assistenza@beper.com which will forward your
enquiries to your distributor.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>